Very nice mod! I’m just getting started in the race category myself. Been droning for several years now, but we use the Mavic pro and Spark. Thanks for sharing. Take care. J.
Hey, i just did the mod but it turns it self off after some seconds, to maintain it on i have to charge my phone at the same time,... did you had the same problem? do you found a solution?
Nice mod ! I love it ! Best mod i seen for the Flysky ! Good idea to take a powerbank for Lipo battery with some extras functions ;-) Il someone find a suitable powerbank for this mod, please paste the link....thank you
I'm currently doing this and my question is where are you getting the correct voltage to power the transmitter? That battery is just 3.7v is it not? Are you drawing the power for the trans off of one of the usb ports or did you just run the power directly from the battery and set the transmitter voltage on the transmitter itself to a lower max for the warnings? If that's the case then denying the controller the power it needs would also reduce its range I would think, right?
Yeah I thought that. The board I used didn't have an easy spot to solder to usb positve and neg and it ended up grounding out and frying a chip on the board. Ordering a new one and retrying. Thinking about maybe going 2s with a couple 18650's for 7.4v and then using a step down to 6v directly off the battery to power the radio and then another step down off the battery to the banks main board for its max voltage of 4v. I think that would work.
Sorry I do not. If your are not confident in doing this mod from watching the video please do not attempt it. It's literally only 2 wires red and black.
The charging port and the led strip is a plus on this one, I'll try to find a similar maybe with searching a slim power bank. Thank you very much for this nice video, very well explained ;-)
Thanks for the Idea, i did the Same mod on my flysky FS i6x. IT works perfect and i dont need Tons of batteries anymore. 👍👍👍👍👍
That’s the most smartest thing I’ve ever seen that’s so simple and amazing that you
Very nice mod! I’m just getting started in the race category myself. Been droning for several years now, but we use the Mavic pro and Spark. Thanks for sharing. Take care. J.
Excellent work, and thanks for sharing. I'm working on doing the same thing
Hey, i just did the mod but it turns it self off after some seconds, to maintain it on i have to charge my phone at the same time,... did you had the same problem? do you found a solution?
this does not explain much , how does the 2s lipo not over exceed the 6v radio claim, why did yoy conect wires to ,etc etc
Thanks for information 🙏😊
Hi nice vid. One question is your fpv goggle from eachine? Can u tell me the model pls
Eachine EV100 it was in the description.
Nice mod ! I love it ! Best mod i seen for the Flysky ! Good idea to take a powerbank for Lipo battery with some extras functions ;-)
Il someone find a suitable powerbank for this mod, please paste the link....thank you
Nice
Won't the boost converter noise disturb the radio signals??
Hi I’ve got a two cell Lipo (7.4v) out of a power bank, it has 3 wires black, red and yellow would it still work and how would I wire it up
Hi I have same radio i6s but there is only one mix can you tell about your radio how many mix and what your firmware version please
Thank
I'm currently doing this and my question is where are you getting the correct voltage to power the transmitter? That battery is just 3.7v is it not? Are you drawing the power for the trans off of one of the usb ports or did you just run the power directly from the battery and set the transmitter voltage on the transmitter itself to a lower max for the warnings? If that's the case then denying the controller the power it needs would also reduce its range I would think, right?
It is being powered off the usb positive and negative which provides 5 volts.
Yeah I thought that. The board I used didn't have an easy spot to solder to usb positve and neg and it ended up grounding out and frying a chip on the board. Ordering a new one and retrying. Thinking about maybe going 2s with a couple 18650's for 7.4v and then using a step down to 6v directly off the battery to power the radio and then another step down off the battery to the banks main board for its max voltage of 4v. I think that would work.
Its a powerbank
This is a great idea and I did it like you
I just want to know what prameter to insert in the tarnsmiter low and alarm warning?
You should set it according to the battery specs that you used.
@@highkkaido1603 i used the same battery value that you used
@@ofircohen1378 I set mine to 5v that way it shows a full battery.
@@highkkaido1603 and what about the warnings level?
@@ofircohen1378 The only thing I changed in the settings was the battery voltage.
What is the battery that you have adapted to the radio?
Do you have written instructions? I'd like to perform this mod but more specifics about the wiring would be nice because mistakes would suck
Sorry I do not. If your are not confident in doing this mod from watching the video please do not attempt it. It's literally only 2 wires red and black.
dont u think the constant 1amp current may destroy the circuits or elements??
Been a year and still works.
Dont the normal aa batteries output some power anyway?
@@batuerakman2238 LAĞN PEZEVENK YAKALANDINNNNNNNNNN DMDMMDMDMDNDMDJDJJDJRFJJFJFJFJFJFJJFJFJFJFKJFJFJFJFJFJFJFJFJFJJFJFNFNFNNFNFNDNDNDNNDNDNDND , MÜBAREK YORUMLARI BİLE OKUMUŞ DKDKKXKXKKXKX
how did you wire the rc buttons to turn on the battery? I see its not tapped anywhere by the button on the pack
I actually figured it out ... we have different power banks & mine doesn't auto on ... I wired in another switch
Iam struggling to get it to work on my drone got same remote it's piar but when I move sticks nothing hepend s
Good afternoon. One question: What is the radio ranger? Thankful.
Hi this is a battery mod not an antenna mod video so I have not tested range.
Highkkaido FPV he has a point... if ur using a lower voltage than the 6v of a battrys, the output power will be reduced so will the range.
Qual a bateria que voce usou?
Hi, it looks great, do you have any link where I can buy this battery?
I got this battery in Japan but any portable cell phone charger should work if it's flat enough.
The charging port and the led strip is a plus on this one, I'll try to find a similar maybe with searching a slim power bank. Thank you very much for this nice video, very well explained ;-)
Thanks appreciate the kind words.
Can I give 7.4 v to it
Dang kevin 7k views