The Ultimate DIY Microphone (super low self-noise!)

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 1,3 тис.

  • @DIYPerks
    @DIYPerks  9 років тому +966

    Wow, it's been up for 60 seconds and we've already got 60 views. Thanks for the support guys!

    • @cfpgomes
      @cfpgomes 9 років тому +33

      +DIY Perks Hey! Nice video! I have a suggestion though: You cold at the final of the video do a comparison of the money spent on a DIY object and the money spent on its counterpart in the market, just to see how much we could or not save if we built ourselves! Cheers and continue the awesome work! :D

    • @IamNotonDrugs
      @IamNotonDrugs 9 років тому

      +DIY Perks You should make an video on how to make an actual ribbon mic. I just have an interest but to to many good videos on showing the process.

    • @rikzel
      @rikzel 9 років тому +7

      +Cláudio Gomes I think it's not even so much about saving money as it is that you can customize and that it is for some applications better than the market equivalent

    • @cfpgomes
      @cfpgomes 9 років тому +4

      rikzel Yeah, sure, but there is a part of the viewers who are deciding between a homemade object or its counterpart in the market, and knowing the money spent would help a lot.

    • @rikzel
      @rikzel 9 років тому

      +Cláudio Gomes true, but I meant to say that that probabely isn't the main goal for him :) besides to teaching of course ;p

  • @MrGollum1996
    @MrGollum1996 8 років тому +53

    I only can say: wow. This sounds reaaally good. I didnt know that it is possible to record in such a beautifull quality, even for musicists.

    • @mibdev
      @mibdev 8 років тому +2

      MrGollum1996 There are better microphones. But yes, this is very high quality.

  • @mcrut111
    @mcrut111 9 років тому +1494

    sorry you had to sacrifice your cat for this video. RIP fluffy.

    • @cmb6062
      @cmb6062 9 років тому +12

      +Michael Crutcher R.I.P

    • @ArchonLicht
      @ArchonLicht 9 років тому +11

      +Michael Crutcher Fluffy never asked for this.

    • @kaptainbastard
      @kaptainbastard 9 років тому +30

      +Michael Crutcher why not just stick the microphone up the cats ass? thats what i did, my cats a spy.

    • @kaptainbastard
      @kaptainbastard 9 років тому +5

      +Harry Johnston LOL yup its blue tooth up the cats ass.

    • @landedhoaxer
      @landedhoaxer 9 років тому +26

      if you listen very carefully you can still hear him meowing :(

  • @TSGEnt
    @TSGEnt 9 років тому +109

    omg! as an audio engineer myself, this was a great build.

    • @tinkomertens7936
      @tinkomertens7936 4 роки тому +4

      especially that it picks up his dang heartbeat...

    • @dhwanitashar1684
      @dhwanitashar1684 4 роки тому +1

      TSG I wanna ask u, how tf does he know about audio, electronics, circuits, mechanics n even physics..?

    • @atlinsonxiao
      @atlinsonxiao 3 роки тому +2

      @@dhwanitashar1684I assume study degrees, hobby, and interests. It is possible to know all these things when it makes you interested in exploring more. Plus, the internet is a free source.

  • @Iliketomakestuff
    @Iliketomakestuff 9 років тому +172

    Awesome! Really well done project and video! (as usual)

  • @Alpha_Mods
    @Alpha_Mods 9 років тому +65

    Awesome built! MUCH better than many professional mics!

  • @jamalissouquaein8016
    @jamalissouquaein8016 9 років тому +8

    This honestly was one of the most impressive builds I have ever seen! The quality of that mic was astounding!! Can't wait to see the next vid with the pcb printing!

  • @phenomanII
    @phenomanII 9 років тому +4

    WOOOOW!!! Those sound recordings were SO real!
    I would honestly listen to 1 hour long recordings of the sea, thunder or those trees in the wind.
    I really felt like I was there.

  • @JohnnyGiddingsCubed
    @JohnnyGiddingsCubed 8 років тому +451

    His eyes are brighter than my future

  • @PV-dl3nl
    @PV-dl3nl 9 років тому

    I don't understand why people "dislike" your videos... You have some of the best content for DIY projects!
    Keep it up!!

  • @Azuon79
    @Azuon79 9 років тому +20

    WOW, your probably the best DIY- channel on UA-cam ;)

  • @x9x9x9x9x9
    @x9x9x9x9x9 9 років тому +1

    dude..... I swear each one of your projects gets more and more elaborate and amazing. I remember way back when you made the pc control terminal. I swear if you don't go on to do amazing things and make a ton of money I will... well I don't know what I will do but you get what I am saying.

  • @twatgpt
    @twatgpt 9 років тому +50

    +DIY Perks : Your a bit confused about difference between the microphones on a handy recorder and the microphones used in a studio application. Condensor microphones which is the type of microphone you are using here comes in 2 different types; LDC(large diaphragm condensor) and SDC(Small Diaphragm condensor). both of these microphones are used in recording studio applications (as they both have different frequency responses and characteristics based on the size of the diaphragm, and an engineer will use these to achieve different results). Handy recorders generally use Small diaphragm condesors in an X/Y stereo array, as this is the most common way to capture a stereo recording. When i go out to capture atmos and soundscapes i always employ the use of SDC's based on the fact that they replicate high frequencies better(which are extremely important with Atmos/soundscapes) and they generally aren't as sensitive meaning less self noise. I understand that it seems like you will get better sound but with mic technique it really has to do with which mic will work better in which situation. And for the example that you have given SDC's are defiantly a better option.
    (sorry engineers rant)
    Also i think the noise coming from the zoom actually has to do with the cheap preamps inside and not the actual microphone, a more accurate demonstration would be having both mics plugged into the same preamp with the same gain setting, then you will really get an idea of the microphones self noise.

    • @Statist0815
      @Statist0815 3 роки тому +2

      I also think that he is refering about things he don't know.

  • @MartyBeardFace
    @MartyBeardFace 9 років тому +1

    Finding your channel was a real treat, i got out my headphones and mini amp... i'm grinning ear to ear. The sound quality is epic! Thanks for all the videos, i can't wait to catch up!

  • @wafflesplays
    @wafflesplays 9 років тому +48

    We love your videos! I hope you go very far in UA-cam 😊

    • @DIYPerks
      @DIYPerks  9 років тому +45

      +wafflesplays Cheers :) I couldn't have hoped for a better audience either - even the critics are being quite polite lately :D you guys are great!

    • @MyGeorg13
      @MyGeorg13 8 років тому +1

      great video you could make a crossover with an other youtuber which makes asmr with this mic, it would be delicious :D

  • @electronicsNmore
    @electronicsNmore 9 років тому +99

    Great video. When I first saw the video thumbnail I thought the recording device was mounted on top of a dog's neck. LOL

  • @nitsan
    @nitsan 9 років тому +177

    Awesome.
    You should do a kickstarter and sell these. :)
    BTW what fur did you use??

    • @guiltyapollyon8085
      @guiltyapollyon8085 9 років тому +54

      +Nitsan Simantov R.I.P Fluffly

    • @buca117
      @buca117 9 років тому +3

      +Nitsan Simantov It's not fur, it's fabric. Fur is leather with the hair still attached, leather is skin, and skin is *barely* water permeable.
      You're not going to get much of any noise through fur.

    • @TheKingArabia
      @TheKingArabia 5 років тому

      Gato fluff 3000

    • @chrismarker6890
      @chrismarker6890 5 років тому +1

      fabric stores sell this stuff. Its faux fur with a fabric backing, its super cheap, and is what its used on most super-high end studio mics for movies and such.

    • @daxarinn
      @daxarinn 4 роки тому

      Kickstarter: yes - zoom recorder included: no!

  • @spacial2
    @spacial2 9 років тому

    That is an outstanding project. I doubt anyone who has ever done any outside sound recording wouldn't appreciate it.
    In the late 70s, I bought a really expensive SONY stereo sound recorder. It worked brilliantly and I used it to record buskers in London Paris and Amsterdam. My wife wanted to listen to something and since the batteries were dead at the time, tried to plug an external PSU into it. Sadly, choosing the audio socket.

  • @kevsperanza
    @kevsperanza 9 років тому +5

    Your videos always emanate a professional Discover Channel feel...

  • @Micahwlsn
    @Micahwlsn 9 років тому

    @DIY Perks Im always blown away by the quality of your videos and projects. Love it

  • @Thriving_in_Exile
    @Thriving_in_Exile 9 років тому +58

    I don't suppose you'd be interested in putting out any tutorials or otherwise educational videos about the skills involved in your projects?
    A lot of the stuff you're talking about, like circuitry, electronics, etc, is waaaay over my head and I'm only catching about half of it. I dunno if you have some kind of background in engineering or if you just do your research on the fly, but yours would be an absolutely *mental* toolset for any DIY'er.
    Always eager to learn new things, but it's kinda hard finding a good place to start, you know?
    Anyway, keep up the good work, boss. Always tickled to see the stuff you come up with.

    • @DIYPerks
      @DIYPerks  9 років тому +12

      +Gunnie I'll look into it! :)

    • @Kestle
      @Kestle 9 років тому +5

      +Gunnie Kinda mean against @DIY Perks to promote another channel on his youtube site, but you should totally check out GreatScott! on youtube. He has some basic guides about resistors, capasitors etc :)

    • @DIYPerks
      @DIYPerks  9 років тому +6

      That's a good suggestion! GreatScott! does have some fantastic tutorials on things like that.

    • @drozcan
      @drozcan 5 років тому

      He was cinematography student afaik

  • @UUeldon
    @UUeldon 9 років тому

    Blown away by the DIY chops displayed here and the final results as well. Well done!

  • @FilmmakerIQ
    @FilmmakerIQ 9 років тому +31

    What an amazing build!!!

  • @Crlarl
    @Crlarl 9 років тому +85

    Record your silent computer with it.

  • @jalexb915
    @jalexb915 9 років тому +3

    Mind-blowing sound! I was highly impressed at the end of the video when you played the samples.

  • @Xenro66
    @Xenro66 9 років тому +4

    That clarity, is amazing......

  • @TDGalea
    @TDGalea 9 років тому +22

    This just goes to show that DIY can always be better than professional kit, especially when it's you making it.

    • @sir_john_hammond
      @sir_john_hammond 5 років тому +2

      As opposed to Do It Yourself where someone else does it.

  • @Vospi
    @Vospi 8 років тому

    A schematic is offline now...
    The video is super-inspiring and overall brilliant. I like, naturally, everything about it.

  • @joshuamckown3145
    @joshuamckown3145 9 років тому +4

    That is BAD ASS! Rode should be taking notes; they could sell a mass produced version of your rig for $600 easily.

  • @dk92996
    @dk92996 9 років тому

    For what your channel lacks in content, it makes up for in quality. Keep up the good work!

  • @funk0rocker
    @funk0rocker 9 років тому +6

    Freaking awesome! You REALLY should sell these! Make a crowdfund!!!! I'd jump on that! Maybe even offer a kit with all the parts and prefabricated boards and instructions for the buyer to assemble (for those with decent hand- eye cordination, but CNC-machine-less non enginers)? I would really like to buy it! Although, I would need it to mount to a mic-stand/boom, but that's a simple mod. Just glue a mic clip to the bottom of the bird feeder and cut a slit in the fur).

    • @lucasc5622
      @lucasc5622 3 роки тому

      realistically nobody would buy this

  • @chinacharltan
    @chinacharltan 9 років тому

    You sir Matthew Perks are indeed a genius! . . You've posted some of the best content I've seen on UA-cam. Thank you for your passion and dedication, I am inspired!

  • @zippedfreak1
    @zippedfreak1 9 років тому +4

    Would you be so kind to share the details of it all like:
    Total cost for all the componenets
    Battery time
    etc.
    Great that you got a relevant sponsor! As long as the sponsor doesn't effect the content in the video it's great that you can get more revenue for your hard work!
    Looking forward to your next project!

    • @sanderpf7078
      @sanderpf7078 9 років тому +1

      battery was 24 hrs non stop

  • @MangaManiac16
    @MangaManiac16 8 років тому

    I don't really have any situation that I would need half of your builds in, but I love watching your channel!

  • @Sithhy
    @Sithhy 9 років тому +147

    Hey, could you this microphone to record your *WHOLE* next episode? *:D*

    • @YashBudhiraja
      @YashBudhiraja 9 років тому +4

      I would be cool but his surrounds would have to be absolutely silent

    • @EpicLPer
      @EpicLPer 9 років тому

      +Skitty™ | Garry's Mod Player I don't think this would be great since the bass you can hear in the last example where he talks is just far too much. You could filter this out but I dunno if this would turn out great.

    • @AttilaThebung
      @AttilaThebung 9 років тому +2

      +EpicLPer Have you heard of the term "High pass filter" at all?

    • @Inckman452
      @Inckman452 9 років тому +1

      +Skitty™ | Garry's Mod Player I think I accidentally your comment, sorry.

    • @Sithhy
      @Sithhy 9 років тому +3

      +AdolphX you accidentally my comment what?

  • @bobbin69
    @bobbin69 6 років тому

    You know a mic is good when it can capture your heartbeat pretty far away with litterly no noice! Great job!!!

  • @ChanonWangtrirat
    @ChanonWangtrirat 9 років тому +5

    Try to use better op-amp like dual NE5534 for tube warmth sound or OPA627bp for extremely lower noise and better detail in all frequency. TL072 is very very noisy one.

  • @paigegamer7769
    @paigegamer7769 4 роки тому

    Wow. You can actually tell wind is thru the trees, not blustering over the mic. Great build!

  • @2007excalibur2007
    @2007excalibur2007 9 років тому +182

    You seem to have a thing for making everything less noisy. :p

    • @MrMrjwongy
      @MrMrjwongy 9 років тому +2

      ponies

    • @thedayzgod
      @thedayzgod 9 років тому

      +rust crumpet lol

    • @juhanasiren6824
      @juhanasiren6824 9 років тому +5

      I was thinking the same, maybe you could come over and make our neighbors less noisy?

    • @HobkinBoi
      @HobkinBoi 9 років тому

      +2007excalibur2007  I am actually surprised to see you here, lol

    • @thedayzgod
      @thedayzgod 9 років тому

      I'm surprised to see you all here.

  • @Nene-8090
    @Nene-8090 9 років тому

    You are genius my friend! And the sound quality of your videos is amazing. Many times using my earphones I have headaches. I watched 5 of your videos one after another and I didn't even noticed i have my earphones on. Amazing. Keep up the good work, I hope one day I'll make some of your projects!

  • @SimpWojak
    @SimpWojak 9 років тому +6

    Great build, keep the good work! Greetings from Lithuania! :)

  • @tachmonite37
    @tachmonite37 9 років тому

    Matt. You have the best DIY videos ever. and I mean that literally. I just wish you could upload more videos.

  • @PrinceWesterburg
    @PrinceWesterburg 9 років тому +3

    This pisses on my Zoom H2N! Nice build and everything you want from a condenser - warm bottom end too and the fabric seems to have rounded the sometimes harsh top end condensers can have, very natural sounding - impressed! In fact, it sounds more like valve condensers to reel to reel - from memory, but its been 25 years+

  • @pleiadesds2012
    @pleiadesds2012 9 років тому +1

    OMG! This this is just awesome! I really need it for my ASMR projects.

  • @muh1h1
    @muh1h1 9 років тому +4

    Pretty great results! but to be completely honest, i think the cheap switching power supply actually introduced some noise into the system...
    I could only hear that on the thunderstorm, but there are three other possibilities:
    Either it was the rain that sounded quite a bit like noise, it was youtunes compression that added some noise, or it was my own audio gear, but i don't think the last one was the problem, most likely it was just rain...
    I am using ATH M50 woth an Onkyo TX-NR414 connected over SPDIF for those intrested.

    • @DIYPerks
      @DIYPerks  9 років тому +11

      +muh1h1 The background noise on that recording was just a breeze in the trees mixed with a slight bit of drizzle. That's why I mentioned that the regulator uses an LM2577 mosfet - its output is unusually clean, so adds literally no audible noise to the signal chain. It's what made the project possible to be honest!

    • @muh1h1
      @muh1h1 9 років тому

      +DIY Perks good to hear :)
      i didnt actally look up the power supplies specs or anything, just assumed it was a very generic one, because it looks a bit like thrse cheap ebay ones. maybe i should :)

    • @eucalyptux
      @eucalyptux 9 років тому

      +muh1h1 it's one of those : www.ebay.com/itm/221185801524

  • @inuysha360
    @inuysha360 9 років тому

    WOW you can hear your heartbeat! Love the quality of your videos! Both in-depth and easy to understand!

  • @maxwell_edison
    @maxwell_edison 8 років тому +113

    DIY perks ASMR channel?

  • @rodssantos
    @rodssantos 9 років тому

    Wow What a great piece you built! Congratulations... The part when I hear your fingers and your heart gave me goosebumps.. Great Work!

  • @misterosc
    @misterosc 9 років тому +64

    00:59 you don't have two cameras and I can tell xDDDD, really good video by the way

    • @RokKrznarr
      @RokKrznarr 9 років тому +14

      +misterosc Well spotted! Matt has really got a passion for quality production.

    • @MLunenborg
      @MLunenborg 9 років тому +5

      +misterosc Had to rewatch at that time stamp. But yes indeed. LOL Pretty darn good transition though!

    • @scheimong
      @scheimong 7 років тому +6

      I had to rewatch several times to pick up the clue. The folds on his shirt gave it away. Pretty damn hard to spot though.

  • @audiouploads5737
    @audiouploads5737 3 роки тому

    The sound quality from that is simply amazing. I didn't expect to hear anything like that kind of audio quality from my desktop speakers, but it actually made them sound like a major audio company's demo setups, or the ambient noise from high-end nature documentaries in movie theaters. From common stereo speakers!
    So if you can do this, why can't microphone companies do the same thing? Because few microphones are as good as the one you made.

  • @ComandanteJ
    @ComandanteJ 9 років тому +14

    Haha, i thought this would be the typical quick and dirty shit you see in most channels with "DIY" in the name. Boy was i wrong LOL. That was awesome, you even made a friggin' PCB froms scratch!. Subbed.

  • @clookoo2
    @clookoo2 9 років тому

    You've got one of the best channels on youtube. Great work man, thanks for sharing your creativity.

  • @arjunajn
    @arjunajn 9 років тому +3

    Awesome stuff.
    I don't have the skills to build this, but never the less amazing

  • @navidmehdi6
    @navidmehdi6 7 років тому

    that is not fair. you need way more subscribers. the quality of these videos are professional and useful

  • @etchieSketchie
    @etchieSketchie 8 років тому +4

    If you were to sell these... How much would you charge?

  • @Numian
    @Numian 9 років тому

    Wow! Those sounds of the sea and the wind was pretty immersive!

  • @MagicPie474
    @MagicPie474 9 років тому +9

    Just imagine how big his DIY power bank would be if he decided to make it.

    • @OrLevy8
      @OrLevy8 3 роки тому

      Now he did...

  • @tomcruz3774
    @tomcruz3774 2 роки тому +1

    I was just looking into field recording! Please do more audio/field recording diy's!

  • @JGDeRuvo
    @JGDeRuvo 9 років тому +14

    WAY over my feeble skills! I'm still trying to build the LED Light panel!

    • @powelly52
      @powelly52 9 років тому

      Me too James me too

    • @Jobey_99
      @Jobey_99 9 років тому

      +James DeRuvo I built a very simple one. All I did was my some thermal glue, A heatsink, A small fan, and a 12v 13Amp hour battery everything was about the same size. I'm currently using the thermal glue to stick the LED chips to the heatsink and some cable tie's to attach the battery and fan. I can send you some photos and links if you haven't finished yet. I used 8X 10W LED's. It's amazingly bright and last's about 2-3 hours depending. 12V and about a 6Amp draw. 6 x 2 = 12 and the battery is about 13Amp hours.

    • @Jobey_99
      @Jobey_99 9 років тому

      +James DeRuvo It's about a 800W equivalent to halogen. You could get 1000W with 2 more LED's, The total cost for me was about £25

  • @furulevi
    @furulevi 9 років тому

    You are a gold mine... let's start with what type of camera were you using to making this video? GREAT video!!!

  • @Snowballs-xk5qg
    @Snowballs-xk5qg 9 років тому +11

    +DIYPerks You should try this mic on your ULTIMATE silent DIY PC, to see how really loud it is :P just an idea

    • @satibel
      @satibel 8 років тому +2

      +Snowballs25687 good idea, a 10-30 sec video would be enough ^^

  • @Bubileaf
    @Bubileaf 9 років тому

    The quality is amazing! I thought it was just awesome how easily the mic was able to pick up your heartbeat. 👏🏼👏🏼👍🏼

  • @lowpolyjedi
    @lowpolyjedi 8 років тому +71

    I HONESTLY THOUGHT YOU PUT SOMETHING ON A DOG

  • @stijnlauwen6227
    @stijnlauwen6227 9 років тому

    You are really onto something with this build! When listening to the samples it was almost like I was standing near the sea or those trees!

  • @LazerLord10
    @LazerLord10 9 років тому +7

    I think I might want to make one of these... _looks at price of one microphone_ . Ok, maybe not...

    • @silentriders
      @silentriders 7 років тому +2

      Welcome to the world of audio engineers

    • @KingfisherTalkingPictures
      @KingfisherTalkingPictures 4 роки тому

      Rode nt1-a’s are considered entry level. I’ve gotten a few off Craigslist. They are relatively common.

  • @jmm1000
    @jmm1000 9 років тому

    WHAT a thoughtful, nicely worded sponsor-thanks! Class act, you.

  • @bluephreakr
    @bluephreakr 9 років тому +12

    You have to at least sell those preamps to us, because not everybody has a CNC machine to make a board with!

    • @00Skyfox
      @00Skyfox 9 років тому +3

      +bluephreakr On the page he linked with the preamp schematic, they have a link at the top of that page of where to buy a pre-made PCB for the project. It'll add to the cost of the project but you'll have a more professional looking final product (depending on how skilled you are at soldering).

    • @reaganharder1480
      @reaganharder1480 4 роки тому

      @@00Skyfox Custom printing PCBs isn't that expensive, especially when you're already using two $250 mics.

  • @gillesmatheronpro
    @gillesmatheronpro 4 роки тому

    That is just as brilliant as the first time I wtached it.
    After some 15 years on film sets (and an audio avid geek myself), I an assure you've done an amazing task of tuning, positioning, designing something that looks the thing... but most important : does the job perfectly.
    Bravo !
    PS : some sound techs I know should come and check this creation of yours !

  • @markcomputertech7997
    @markcomputertech7997 9 років тому +5

    You should manufacture these and sell them. I am sure the broadcast media world would buy them.

  • @markopesevski
    @markopesevski 9 років тому

    Boy am I excited for the CNC video... Can't wait! Keep the great videos coming, you do an awesome job!

  • @bellefeu4933
    @bellefeu4933 8 років тому +9

    I can honestly say you're not a computer nut until you cnc your own chips.

    • @cenkaytekin
      @cenkaytekin 4 роки тому

      I would seriously buy this or a DIY kit you could offer. Do you have any plans to sell?

  • @gustavofx
    @gustavofx 6 років тому +2

    Hello, any chance we could get a more detailed list of all materials (and tools!) used to achieve the complete setup?
    Just loved the video and the results. Great job!

  • @KatieDunn590
    @KatieDunn590 8 років тому +5

    Who would want to take that on a hike? XD

    • @DIYPerks
      @DIYPerks  8 років тому +27

      A sound recordist, presumably :)

    • @mibdev
      @mibdev 8 років тому +2

      Katie Dunn People who appreciate the nature and want to share it.

  • @Caarrssoon
    @Caarrssoon 9 років тому

    I listened to this on a 5.1 system and it sounded amazing! Keep up the good work!

  • @slaveNo-4028
    @slaveNo-4028 2 роки тому +3

    I don't know whether it's my cheap motherboard-included audio or my cheap, plebian headphones, but I don't hear much difference ;_;

  • @stevedoubleu99B
    @stevedoubleu99B 8 років тому

    Excellent!!! Stroke of genious using a bird feeder for the frame, and the lack of noise.......WOW!!

  • @glebspercuks7606
    @glebspercuks7606 9 років тому +6

    I thought it was a dog in the thumbnail.

  • @RonaldMoD
    @RonaldMoD 9 років тому

    This is one of the coolest DIY videos I have seen yet!

  • @arasharfa
    @arasharfa 9 років тому +6

    TAKE MY MOONEEEEEEEYYYYYYYYYYY

  • @temmihoo
    @temmihoo 7 років тому

    Truly exceptional sound quality! I came to this video because I enjoyed your very good diy absorption panel video just minutes before. Subscribed, cool beans.

  • @TheFaarao
    @TheFaarao 9 років тому +39

    Dat 1080p 60fps tho

    • @Blacktronics
      @Blacktronics 9 років тому +1

      +JuriePie *1080p 144fps

    • @Holzider
      @Holzider 9 років тому

      +Blacktronics why would you prefer 144fps tn in favor of 60fps ah-ips?

    • @victornpb
      @victornpb 9 років тому +3

      +holzi 144p@24fps LOL

    • @Holzider
      @Holzider 9 років тому

      *****
      did you even read and understand what i wrote?

    • @victornpb
      @victornpb 9 років тому +1

      holzi of course i did, I was just being sarcastic. The more the better, I want 8K@240fps

  • @Stelios.Posantzis
    @Stelios.Posantzis 6 років тому

    This is quite brilliant! It's great how it contains lots of very helpful links and tips for other possible projects. My personal favourite was the shock mound which I think is brilliantly simple and possibly could be a useful mini project all of its own.

  • @hamza119944
    @hamza119944 9 років тому +26

    you need to think about selling your products

  • @rune3492
    @rune3492 9 років тому +1

    Wow that sounds so beautiful and peaceful. Amazing work man love the projects.

  • @__-cd9ug
    @__-cd9ug 8 років тому +102

    Looks like Donald Trump

  • @lhl2500
    @lhl2500 9 років тому +2

    Try and find some isolated places in the woods, on the beach or other nature related things like rain storms and thunder. Then make 30-60 min recordings of ambient sounds. These will be perfect for playing in the background (or on earphones) when you go to bed.

  • @dimianastassakis
    @dimianastassakis 8 років тому

    Wow, you are amazing. Sorry for my bad english. i wanna say: it is 1. thing to have an Idea, another thing to construct that.
    But you give all the necessary things including the exact instructions. This is very time consuming and I appreciate your contributions here. Thanks for your time and your effort to do you run here. Even for me, who speaks bad English, your clear pronunciation is understandable. One Thing, to built this Microphone is not so easy for everyone as the other Things like the Shlider f.e. I Recently I began film-making to expand my photo Journalistic work. But to make documentaries takes more time and more work and more money for equipment. by your posts here, maybe it is not hopeless to invest in good quality to produce without a fortune.

  • @ZoomcorpUK
    @ZoomcorpUK 9 років тому +3

    Great use of the H1! Amazing project
    -Sam, Zoom UK

    • @DIYPerks
      @DIYPerks  9 років тому

      Cheers! I've been using your products ever since I bought a H2 way back in 2008 - they're always top performers for the price. I wish you guys would make a recorder with an ORTF mic configuration (one on each end of the recorder, perhaps). It's a bit niche maybe, but I'd buy one instantly.

    • @ZoomcorpUK
      @ZoomcorpUK 9 років тому

      +DIY Perks That would be great, nothing in the pipeline though. Have you seen the F8?

    • @DIYPerks
      @DIYPerks  9 років тому

      Bit out of my price range unfortunately so I hadn't actually taken a look before - looks like an impressive piece of kit! The app support looks particularly cool.

  • @nikolaushauser3785
    @nikolaushauser3785 4 роки тому

    Wow that’s amazing !!! What a great seashore noise ! Incredible! Normally sound engineers have to combine recordings from near and far for this rich sound !

  • @AdomDoledas
    @AdomDoledas 9 років тому

    Great seeing you moving into 60p vids, really pleasant to the eye. Keep em going bro.

  • @JORGE4757S
    @JORGE4757S 9 років тому

    Just imagine the hype in the ASMR community, you need to start making more of these, great project with amazing results.
    I would be interested in a DIY video on a how to make your own audio amplifier like used most options are either too expensive or too noisy.

  • @BigParadox
    @BigParadox 4 роки тому

    Very impressive, I will keep this in mind for the future. I really liked the ambient sound tests with the wind in the trees and the water, it gave such a realistic experience.

  • @slidingsky7
    @slidingsky7 9 років тому

    fantastic work, you inspire me even though i haven't built anything myself except for some small customizing work, not worth mentioning. your videos are very comprehensive and clear, keep up the best work i've seen !

  • @38911bytefree
    @38911bytefree 9 років тому

    The sounds are pretty clean and real. The best thing, as a recorder, Ive ever heard was a UHER REPORT, portable R2R with its original UHER MIC, speech quality was incredibly real (even just listening to the built in speaker). If you like recording, I would give this old vintage recorder a try. If it was serviced recently, even more. By its time it was the only portable to get up to 20Khz and it was in production for over 30 years.

  • @NikoxD93
    @NikoxD93 7 років тому

    Your audio samples sound REALLY awesome! With headphones

  • @mohammedfaisal6946
    @mohammedfaisal6946 8 років тому

    man your the best DIY builder hats off the good work

  • @Horrorgraphy
    @Horrorgraphy 6 років тому

    WOW! ... JUST WOW! You can be a Foley artist with this.

  • @RealDealHolyfield2099
    @RealDealHolyfield2099 8 років тому

    Wow, this is really impressive. It's way beyond my skill level, but I still think it's super cool. Great job!

  • @brand017
    @brand017 3 роки тому

    With headphones it is really fantastic! Thank you for the sounds.

  • @WadeWoodring
    @WadeWoodring 8 років тому

    wow! I mean WOW! This is my kind of insane DIY project. I'm putting this on my to do list. Incredible work. Great job!