Installing BMC Performance Air Filter For My Himalayan |
Вставка
- Опубліковано 29 вер 2024
- In this video, we'll guide you through the simple process of installing a BMC air filter on your motorcycle. Upgrading to a BMC air filter can improve your bike's performance and ensure better air filtration for a smoother ride
Hi bro nanum himalaiyan 411 use panurain 10000km tyre change panura mathe iruku nalla tyre brand solunga
Maxxis Maxplore
Marginal difference kooda theriyaadhu apdidhaane😊?
Engine takes time to adapt, starting la onnum perusa feel avadhu konjam time aanadhan you'll get to know the difference also periya difference feel agadhunu solradhuku padhil I said marginal difference nu by mistake!
@@onelifeprakash that's alr8!!! Oru difference um feel panna mudiyadhu ✨aprom edhuku adhu vaanganum 🤔
Apdi ila bro difference feel agum but change panna udane theriyathu, oru 500km aachu new air filter la run pannadhan engine athuku ethamaari adapt aagum, adapt anadhuku apparam acceleration, pickup ellame better ah irukum mileage kuda adhigama kedaika chance iruku
It's not recommended to install free flow air filter or exhaust without re-tuning the ECU to handle additional air flow. Now, your bike will run on a lean mixture leading to overheating, sluggish performance or even seizure. So, either re-flash your ECU at Moto-tunes or get any piggy back ECU like Powertronic installed.
Yes I'm aware of it, will be upgrading that too
Is it applicable to Bs4 himalayan as well ?
Do you mean the air filter is applicable for bs4 or you're taking about the ECU remapping?
@@onelifeprakash yes
@@onelifeprakash do i need to remap Ecu if using this airfilter on himi 411
Bro, recently I started feeling some shakiness in front steering and when I gave to service they says it is normal. Also, my bike keeps turning off mostly in second gear while slowing down with holding the clutch fully to cross speed breaker. My question is, did you face any similar issues like this.
I have only crossed 8k kilometer in my 411 Himalayan
For the steering issue you should check the coneset bearing bro put the bike in the center stand and slowly the move the handlebar from left to right check for any tight spot get it checked from a good mechanic outside royal enfield, bearing must have been rusted. either it needs re-greasing or the mechanic would suggest you to get it replaced I got mine replaced 3 Days back I had a similar issue now it's fine after changing the coneset.
I don't face the turning off issue bro
❤❤❤
♥️♥️♥️
Bro seat cover link irundha share pannunga bro
Limited-time deal: SaharaSeats™ Royal Enfield Himalayan Cushion Seat Cover (Seat Cover) amzn.in/d/0RdapNA
@@onelifeprakash thanks bro