How to Choose a Replacement Capacitor

Поділитися
Вставка
  • Опубліковано 15 вер 2024
  • This video describes how to replace a motor Start Capacitor and Run Capacitor on an air compressor motor, and also shows the specs you will need to find to replace the Capacitors.

КОМЕНТАРІ • 27

  • @paulm.7422
    @paulm.7422 6 років тому +10

    HVAC techs can be the problem! They will often replace caps based on what they are carrying on their truck; not what the unit calls for! The units may run, but they may wear out sooner!
    After educating myself on a/c electrics, I checked both my outdoor a/c compressor units and BOTH had incorrectly-rated caps.
    I now have the correct replacements, plus spares and two replacement contactors - $120 for all four, off Amazon - about the price of a service call.
    In future, I will always check things myself before calling a technician.

  • @jeromesalas4793
    @jeromesalas4793 4 роки тому +1

    Hi how to identify starting capacitor terminal without markings? Just bought online just saw big dot.It's difficult to identify which one is for the red and for the purple wire.Please help me 25mfd and 450 v

  • @rovindrasingh2743
    @rovindrasingh2743 3 роки тому +1

    what capicator can be used to spin a 110v dc hair trimmer motor? my trimmer was plugged in the wrong current and the green board burn but the motor is vibrating when i attached it to 110v current

  • @EricTireguy
    @EricTireguy 8 місяців тому +1

    Have a question. I ordered a capicators. All the specs matched like 216-259UF 250vac 60hz +65°c
    When i received the capicators they are smaller in size. Why is that? Will they work?
    Thank u

  • @marcol5374
    @marcol5374 3 роки тому

    Thanks for the video.
    What about the pin ? Can you explain me the difference beetween 2 pin capacitor and 4 pin capacitor?
    Thabks a lot

  • @Flordelino-hf1nu
    @Flordelino-hf1nu Рік тому

    Sir, what is the resistance value of that resistor attached in start caps terminals?
    New subscriber here from Valencia City, Bukidnon.

  • @efrensaclolo7021
    @efrensaclolo7021 4 роки тому +2

    I put 50 mfd 44 0 volts in my furnace blower that uses 10 mfd 370 volts, It is running fine.But I ordered the exact one this is just temporary, Is it okay to use that higher mfd for now? Your response will be appreciated by the subscribers.

    • @josephfenton7432
      @josephfenton7432 3 роки тому +3

      From what I've read up on this 370 to 440 is ok but the opposite will burn up the motor and the mfd should only be increased no more than 20 percent

  • @merlinious01
    @merlinious01 3 роки тому +2

    What if all marking on the capacitor are missing?

    • @ikigai47
      @ikigai47 2 роки тому

      another tech trick to get you to call them vs just replacing the part yourself.

  • @ragaraga9399
    @ragaraga9399 Рік тому

    Can I up size a 378-455 MFD/125V MFD to 400-480 MFD/125V Start capacitor?

  • @carllewis2207
    @carllewis2207 6 місяців тому

    My ac unit model# tag is worn off and the capacitor has nothing on it, but SH1238 TT10000 what can I do?

  • @pharoahmonk50
    @pharoahmonk50 2 роки тому

    Good info.

  • @lornawhite9794
    @lornawhite9794 3 роки тому

    Hi guys I have a problem I'm changing my capitator on my tumble dryer but the black lead has broken off how can I fix this issue any help please

  • @jhfowler2326
    @jhfowler2326 5 років тому +17

    It's a piece of cake when the old capacitor has everything written on it - HOW ABOUT DETERMINING WHAT SIZE DUAL CAPACITOR IS NEEDED WHEN THERE IS "NO DATA" ON THE OLD CAPACITOR?

    • @iiiiiihaa
      @iiiiiihaa 4 роки тому +1

      Have you find any answer for this question? Koz i have the same question... plz.

    • @mpachinko4069
      @mpachinko4069 4 роки тому

      No one seems to have an answer?

    • @phettywappharmaceuticalsll8842
      @phettywappharmaceuticalsll8842 3 роки тому

      @@mpachinko4069 you’re kinda screwed. Depending on what it’s being used on yiu might can use a 3-1. Unless you can download manual it may show the specs

  • @badbadboy36420
    @badbadboy36420 6 місяців тому

    Hi, could someone please help me find the right replacement capacitor? This is what is printed on the old one ( ZHN (M)105°C 25V 1000 uf CD288H L.E.S.R ) ?

  • @karlenesegre8346
    @karlenesegre8346 6 років тому +4

    if the casing is damaged how do you know the replacement capacitor?

    • @jackal58590
      @jackal58590 2 роки тому

      Try the machine manufacturers.Give serial numbers etc .

  • @edca8114
    @edca8114 4 роки тому

    very good 😎👍🏼🇺🇸

  • @anthonybitseedy8612
    @anthonybitseedy8612 Рік тому

    Capacitor 55/12 compatible with a capacitor 55/5 can't find capacitor 55/12 no one carries it

  • @LifeSavingDefense
    @LifeSavingDefense 2 роки тому +1

    🙏 thank you

  • @SuperJV4x
    @SuperJV4x 5 років тому +2

    in business and doesn't even bother to reply to comments