I have the same exact problem right now. I let the drone sit for a week or so. installed a ribbon type hdmi cable and it cant find solo. Did the reset and at first the drone would not reset. did some reseating on the wifi chip and gps chip.. it then factory reset. but when factory resetting the controller it gets to the successful update screen and cant do anything after that. what did du find out? any resolution?
3dr clearly states when you reset the drone you hold down the pair button for 30 seconds or longer and wait for a quick 30 sec orange flash, you only held it down for 8 seconds and did not even observe if its flashing correctly. I have bought multiple 3dr solo's that were supposedly not working, and fixed them all with a reset of the PIXHAWK first and a reset of the solo computer. the problem most have is they do not wait for the solo to properly boot after a reset it sometimes takes a bit longer....
I hear ya sometimes they can be finicky, no orange light or a stuck orange light indicates the companion computer did not boot correctly, this usually means the SD card is not seated as the boot sequence is contained on the SD card. You have to pretty much disassemble the solo to get to it so you were better off swapping it out for a working unit. One small crash can dislodge the SD card, ask me how I know, also the SD card holders on both the SOLO and the controller are sub-par and I feel a real issue. Anyway glad you got it sorted and happy flying..
my solo is not conecting with the controller I try to do the factory reset but is not doing anything i press the reset botton for longer then 30 seconds still not doing anything , please do you have any idea how to fix this problem.
thats my case...i had small crash from meter....after accident i was able to power on and pair and so on...when i got home all of the sudden i could not pair solo with controler...so tired to reset solo...now i am stuck - orange light is constantly on...pls any advice on this???? thanks
Hi Jason. I have the identical problem. Were you able to figure out what was going on? would appreciate very much to know the solution. I changed my wifi card but that did not fix the problem. When I try to do a factory reset my light underneath doesn't even light up just like yours. appreciate any help and thanks
how do u know when its started its factory reset and how long does it take i tryed it i think i might of turn it off to early and now my solo wont conect to the controller
Yes. For over two months now. They just keep telling me to factory rest it over and over. They finally made me make this video to prove to them it isn't working. I use to be able to reset it but it wouldn't connect or it would but then lose connection before update was finished. I've reset it some many times doing what they told me it won't even reset anymore. They have been pretty slow at working with me. Before all this the drone was doing amazing, by far the best drone I've flown. Guess we'll see what they do from here. Only had it since Late April. And two of the months I can't get it off the ground.
Yes. For over two months now. They just keep telling me to factory rest it over and over. They finally made me make this video to prove to them it isn't working. I use to be able to reset it but it wouldn't connect or it would but then lose connection before update was finished. I've reset it some many times doing what they told me it won't even reset anymore. They have been pretty slow at working with me. Before all this the drone was doing amazing, by far the best drone I've flown. Guess we'll see what they do from here. Only had it since Late April. And two of the months I can't get it off the ground.
I updated the software and now the app won't work since the Android app has not been updated since 2016. I tried to update it with an iPhone and the wifi won't work. I guess I'm fucked at this point. I have sent them a couple of emails and no answer. 500 dollars thrown away.
@@stropcity1666 trying to find out the same , I have 2 drone that’s having issue , one won’t even lift off I have reset multiple times and now I can’t even get the remote to come on battery is charged
i had the same problem yesterday and i can't solve it, i hold it for 30 sec. and more and it doesn't work at all, if you can give me any help i will really appreciate it, i bought it last week used and i need it for work, (sorry if i make any mistake in grammar or spelling im from uruguay), thanks!
oh swt thats the one but i ended up pairing my solo to my controller again and it worked all i did was turn my controll on like normal then turned solo on then i held the pairing button down till it said new solo has been found on the control and it says hold a an b to continue and conected and now um flying again soo happy
You do not have to reset the controller like that cause all your doing is confusing everything, just follow the steps on resetting the drone, it will automatically reset the Controller
Well almost I can't get it to even connect to the solo link. It shows up on my iphone as a connection acts like it will connect then shows no internet connection in orange under the connection on the iphone. Tried the factory reset a couple times, powering everything up in diffrent orders, Connecting and disconnecting from the internet. So I'm dead in the water can't do anything with it. Its an expensive piece of equipment to be giving me this problem after only a dozen or so flights. Everything else is exactly the same. I'm so frustrated with it right now, I'm about to make a video of it being blown up!
Did you get this resolved? If you go into setting on your iPhone , go to cell carrier and turn cell data off. Then the solo link should connect after it's connected turn cell data back on that should help. Just seeing this now hope it helps.
Don’t comment on his video you ain’t even know how to do it he did it correctly it’s just the control ain’t paring up but I did it thanks to his video so keep dum comment to your self dude tbh
go through all the steps exactly!! if you mess up, do it right the first time. i finally got mine all set up again
I have the same exact problem right now. I let the drone sit for a week or so. installed a ribbon type hdmi cable and it cant find solo. Did the reset and at first the drone would not reset. did some reseating on the wifi chip and gps chip.. it then factory reset. but when factory resetting the controller it gets to the successful update screen and cant do anything after that. what did du find out? any resolution?
Friend, my drone 3dr does not light orange light for pair. What was the solution you found?
3dr clearly states when you reset the drone you hold down the pair button for 30 seconds or longer and wait for a quick 30 sec orange flash, you only held it down for 8 seconds and did not even observe if its flashing correctly. I have bought multiple 3dr solo's that were supposedly not working, and fixed them all with a reset of the PIXHAWK first and a reset of the solo computer. the problem most have is they do not wait for the solo to properly boot after a reset it sometimes takes a bit longer....
I hear ya sometimes they can be finicky, no orange light or a stuck orange light indicates the companion computer did not boot correctly, this usually means the SD card is not seated as the boot sequence is contained on the SD card. You have to pretty much disassemble the solo to get to it so you were better off swapping it out for a working unit. One small crash can dislodge the SD card, ask me how I know, also the SD card holders on both the SOLO and the controller are sub-par and I feel a real issue. Anyway glad you got it sorted and happy flying..
my solo is not conecting with the controller I try to do the factory reset but is not doing anything i press the reset botton for longer then 30 seconds still not doing anything , please do you have any idea how to fix this problem.
Follow this right from 3dr
3dr.com/support/articles/pairing_the_controller/
thats my case...i had small crash from meter....after accident i was able to power on and pair and so on...when i got home all of the sudden i could not pair solo with controler...so tired to reset solo...now i am stuck - orange light is constantly on...pls any advice on this???? thanks
xevets I try so meny times but the orange light stay on is not flashing
my solo is not conecting to the controller I try to factory reset but is not blinking the light did you fix it please
you need to remove the sd card that is on the motherboard of the drone same thing happen to mine and it fly like new
It work I remove it and put it back in thank you
GustavoArceMusic thats good
Hi Jason. I have the identical problem. Were you able to figure out what was going on? would appreciate very much to know the solution. I changed my wifi card but that did not fix the problem. When I try to do a factory reset my light underneath doesn't even light up just like yours. appreciate any help and thanks
I contacted 3DR and they were able to determine that it was a defect and they replaced the drone completely.
Thanks for the help. they have asked me to send them the logs of the last 10 flights. Appreciate the help
Friend, have you solved the reset problem? The orange light does not come on when I press the PAIR button.
i bought the 3dr solo a month ago but the motor number 2 does not spin.can some one tell me what can i do above it to solve it
how do u know when its started its factory reset and how long does it take i tryed it i think i might of turn it off to early and now my solo wont conect to the controller
Have you tried chatting with 3dr support?
Yes. For over two months now. They just keep telling me to factory rest it over and over. They finally made me make this video to prove to them it isn't working. I use to be able to reset it but it wouldn't connect or it would but then lose connection before update was finished. I've reset it some many times doing what they told me it won't even reset anymore. They have been pretty slow at working with me. Before all this the drone was doing amazing, by far the best drone I've flown. Guess we'll see what they do from here. Only had it since Late April. And two of the months I can't get it off the ground.
Yes. For over two months now. They just keep telling me to factory rest it over and over. They finally made me make this video to prove to them it isn't working. I use to be able to reset it but it wouldn't connect or it would but then lose connection before update was finished. I've reset it some many times doing what they told me it won't even reset anymore. They have been pretty slow at working with me. Before all this the drone was doing amazing, by far the best drone I've flown. Guess we'll see what they do from here. Only had it since Late April. And two of the months I can't get it off the ground.
but i have the orange light is flashing. and i have conneted my solo again after see your video :D
Jason, what was the solution you found?
CAST vídeos I didn’t find it. 3DR determined it was something on their end and they just replaced it.
I had not been able to get my factory reset on my controller at allI have no idea what to do.
I updated the software and now the app won't work since the Android app has not been updated since 2016. I tried to update it with an iPhone and the wifi won't work. I guess I'm fucked at this point. I have sent them a couple of emails and no answer. 500 dollars thrown away.
I have an issue I recently bought a used one I have the previous owner wifi password but I can't register on the app any suggestions
FActory reset just the controller.
hey man iv jus found the soloution to ur problem let me no if u havent fixed ur drone yet and il give u the info u need
can you tell me
Hey you doing? Did u have a fix for the solo staying with green lights and won't connect to controller or app.
@@stropcity1666 trying to find out the same , I have 2 drone that’s having issue , one won’t even lift off I have reset multiple times and now I can’t even get the remote to come on battery is charged
My solo 3dr won't factory reset it keeps beeping
Hey Im having the same problem just got a 3dr wish I read up on all the problems first:( did u ever find a fix to this?
i had the same problem yesterday and i can't solve it, i hold it for 30 sec. and more and it doesn't work at all, if you can give me any help i will really appreciate it, i bought it last week used and i need it for work, (sorry if i make any mistake in grammar or spelling im from uruguay), thanks!
amigo pudo hacer funcionar el solo , yo tengo el mismo problema ahora
gustavo necesitas remover la tarjeta sd que esta en el motherboard quitarla y ponerla de nuevo
Friend, have you solved the reset problem? The orange light does not come on when I press the PAIR button.
@@GustavoArceMusic Boa noite ! Estou com o mesmo problema. Como faço para resolver ? Pode me ajudar?
Explain how to reset it
Dude when you reset the drone it resets the controller, what are you doing pressing the fly button and the power button, your confusing the drone dude
oh swt thats the one but i ended up pairing my solo to my controller again and it worked all i did was turn my controll on like normal then turned solo on then i held the pairing button down till it said new solo has been found on the control and it says hold a an b to continue and conected and now um flying again soo happy
I tried that too. but i think something went out on the controller or drone that was just unfixable from my position. Just glad 3DR is helping out.
Friend, have you solved the reset problem? The orange light does not come on when I press the PAIR button.
You do not have to reset the controller like that cause all your doing is confusing everything, just follow the steps on resetting the drone, it will automatically reset the Controller
i have same proplem, 18/8/2016, Bro.
i can't not connect again anymore :(
you too... stop by and see us. facebook.com/groups/363840837156620/permalink/469320876608615/
I'm having this problem now too. When I click your link above, it says "Sorry, this content is not available right now"
You need to be a member of the "3DR Solo Hacks" Facebook group to see the link above. facebook.com/groups/363840837156620/
Desmonta en dron para quitar el micro SD y luego conectalo y arma todo y listo
Sabes cuál es la clave de fábrica del wifi
Just a word of advice, 1:45 to 6:50 cut out what a wast
Good mornig i isso The Brasil dificilmente is slo drone help
I had the same problem 3 days ago I was able to get everything restarted and connected and in the sky
MysticEmblem 88 how did you fix your problem? I'm having same problem cause I messed with things I shouldn't have.
Active806 R/C what was is the problem with your 3DR
Friend, have you solved the reset problem? The orange light does not come on when I press the PAIR button.
Same problem!!
Well almost I can't get it to even connect to the solo link. It shows up on my iphone as a connection acts like it will connect then shows no internet connection in orange under the connection on the iphone. Tried the factory reset a couple times, powering everything up in diffrent orders, Connecting and disconnecting from the internet. So I'm dead in the water can't do anything with it. Its an expensive piece of equipment to be giving me this problem after only a dozen or so flights. Everything else is exactly the same. I'm so frustrated with it right now, I'm about to make a video of it being blown up!
Just call 3DR jeez
Did you get this resolved? If you go into setting on your iPhone , go to cell carrier and turn cell data off. Then the solo link should connect after it's connected turn cell data back on that should help. Just seeing this now hope it helps.
Mine too. Exact same thing, and the company has ZERO customer service.
Try getting a new controller
you are 3 years late buddy
Español
if your going to make a video do the steps correctly...
Don’t comment on his video you ain’t even know how to do it he did it correctly it’s just the control ain’t paring up but I did it thanks to his video so keep dum comment to your self dude tbh
i bought the 3dr solo a month ago but the motor number 2 does not spin.can some one tell me what can i do above it to solve it
angel Escalante Montalvo load up mission planner and try it's diagnostics, chances are there's a loose connection with the motor pod.