Mikrotik CCR1036-12G-4S Full Configuration Step by Step 2023

#internet #router #mikrotik #wifi
Mikrotik Cloud Core Router CCR1036 12G-4S Basic Configuration
To configure the MikroTik CCR1036-12G-4S router, follow these steps:
Connect to the router: Use an Ethernet cable to connect your computer to one of the Ethernet ports (e.g., eth1) on the MikroTik CCR1036-12G-4S router.
Access the router's web interface: Open a web browser (e.g., Chrome, Firefox) on your computer and enter the IP address of the router in the address bar. The default IP address of the MikroTik CCR1036-12G-4S is usually "192.168.88.1". Press Enter to access the login page.
Log in to the router: On the login page, enter the username and password to log in to the router's web interface. The default username is usually "admin", and the default password is blank (no password). If you've changed these credentials before, use the updated login information.
Basic configuration:
Set the hostname: Go to the "System" menu, then click on "Identity". Enter a hostname for your router.
Set the time zone: Navigate to the "System" menu and select "Time Zone". Choose the appropriate time zone for your location.
WAN configuration:
Set the WAN IP address: Go to the "IP" menu and select "Addresses". Click on the "+" button to add a new address. Assign an IP address and subnet mask to the WAN interface.
Set the default gateway: In the "IP" menu, click on "Routes". Add a new route with a destination address of "0.0.0.0/0" and set the gateway to the IP address of your upstream router or ISP.
LAN configuration:
Configure LAN IP address: In the "IP" menu, select "Addresses". Click on the "+" button to add a new address. Assign an IP address and subnet mask to the LAN interface.
Set up DHCP server: Go to the "IP" menu, then click on "DHCP Server". Add a new DHCP server configuration with a suitable address pool, DNS servers, and lease time.
Firewall configuration:
Configure firewall rules: Navigate to the "IP" menu, select "Firewall". Set up appropriate firewall rules to control incoming and outgoing traffic according to your requirements.
Save and apply settings: After configuring the router, save the changes and apply them. Look for a "Save" or "Apply" button in the router's interface. The configuration will be applied, and the router will reboot.
Please note that the steps mentioned above provide a basic configuration for the MikroTik CCR1036-12G-4S router. Depending on your network requirements, you may need to further configure advanced features such as VPN, VLANs, QoS, or routing protocols. Refer to the MikroTik documentation or consult with a network professional for specific configuration details or further assistance.
Please My Channel and Pages follow Subscribe,Like and Share Thank You
====================================================================
1- Subscribe UA-cam: I Like Pathan
bit.ly/40XO3O4
_________________________________________________________________________
2- Subscribe UA-cam: Zila Network
bit.ly/3MjBNUg
_________________________________________________________________________
3- Subscribe UA-cam: Zila Pathan Vlogs
bit.ly/4365yxJ
_________________________________________________________________________
4- follow my Facebook Page:Comedy TV
bit.ly/3naFnpE
_________________________________________________________________________
5- follow my Facebook Page:
bit.ly/3Np8fox
_________________________________________________________________________
6- TikTok Page Like and follow:
/ like_pathan
_________________________________________________________________________
7- WEB: zilapathan.blogspot.com/
====================================================================

[@sbkucheksath]

iske sath kon sa router use kru

[@zilanetwork]

koye bi leken router ka dhcp band karna hai

[@sbkucheksath]

@@zilanetwork which mikrotik router support 1000 hotspot client

[@kuli1617]

Which port to isp(wan)