#router #wifi #internetaccess #access_point #5g #wireless
How to Etisalat arcadyan Router to access Point
پوائنٹ تک رسائی کے لیے اتصالات آرکیڈین راؤٹر کا طریقہ
To configure an Etisalat Arcadyan router as an access point, follow these steps:
1. Reset the Router (Optional)
If the router has been used before, reset it to factory settings.
Locate the reset button on the router, press and hold it for about 10-30 seconds until the lights blink, indicating the reset is complete.
2. Log in to the Router
Connect your computer or smartphone to the Arcadyan router via Wi-Fi or an Ethernet cable.
Open a web browser and enter the router's IP address in the address bar (commonly 192.168.1.1 or 192.168.0.1).
Log in with the username and password. The default is often:
Username: admin
Password: admin or printed on a label on the router.
Change your password if prompted and save.
3. Disable DHCP
Navigate to the LAN settings section in the router configuration.
Turn off DHCP Server. This prevents the router from assigning IP addresses, as this will now be handled by your primary router.
4. Assign a Static IP Address
Assign the Arcadyan router a static IP address within the same subnet as your primary router but outside its DHCP range. For example:
If the main router’s IP is 192.168.1.1 and its DHCP range is 192.168.1.2 to 192.168.1.100, set the Arcadyan router's IP to something like 192.168.1.200.
Save the settings, and the router may restart.
5. Disable NAT (Optional)
If available, disable NAT (Network Address Translation) to avoid double NAT issues.
6. Configure Wi-Fi Settings
Navigate to the Wireless settings section.
Configure the SSID, security mode, and password.
To create seamless roaming:
Use the same SSID and password as your primary router.
Set a different channel from the primary router to minimize interference (e.g., if the main router uses channel 1, set this to channel 6 or 11 for 2.4 GHz and non-overlapping channels for 5 GHz).
7. Connect the Access Point to the Main Router
Use an Ethernet cable to connect the Arcadyan router to the main router:
Plug one end of the cable into the LAN port of the Arcadyan router.
Connect the other end to a LAN port (not the WAN port) of the main router.
Avoid using the WAN port on the Arcadyan router to prevent routing conflicts.
8. Test the Configuration
Ensure that devices connected to the Arcadyan router (Wi-Fi or LAN) can access the internet.
Verify that devices receive IP addresses from the main router.
9. Save and Backup Settings
Save your configurations.
Some routers allow you to back up the settings as a file in case a reset is needed in the future.
Please My Channel and Pages follow Subscribe, Like and Share Thank You
====================================================================
1- Subscribe UA-cam: Zila ABC Tube
ua-cam.com/channels/5tjrbmDo0bRuQU2TRNlSGA.html
___________________________________________________________________________
2- Subscribe UA-cam: Zila Network
bit.ly/3MjBNUg
_________________________________________________________________________
3- follow my Facebook Page: Life TV 786
bit.ly/3naFnpE
_________________________________________________________________________
4- follow my Facebook Page:Zila Pathan
yasirkhanlife786
_________________________________________________________________________
5- TikTok Page Like and follow:
www.tiktok.com/@zila_pathan
_____________________________________________________
Earning Money: eo.finance/?r_id=919058327
____________________
6- WEB: zilapathan.blogspot.com/
7- WEB: ziladarkhan.wixsite.com/pathan
8- Offer Link : amzn.to/3NYDaab
8- WEB: zilamobileprice.blogspot.com/
Mikrotik Router Best Price
9- amzn.to/42aLHvF
====================================================================