is there a way to short out certain pins to force a reset orfactory default of the camera from the ethernet jack? I keep reading on forums that when you update the firmware you need to do a complete factory default of the camera. sometimes the camera locks up and you have to climb a roof to reset a camera, this isn't practical, especially when the camera site is 40 minutes away.
Hi. Resetting by shorting the Ethernet is not a option I’m afraid. However other options are XML resetting. This process just requires a email to our Support Department and a separate network switch unless already on one. On a side note, for sure by the book you should Factory Default after a upgrade however unless it was a big jump like from 2018 to 2021 a factory default is not always necessary.
@@DahuaUKIreland Okay because I have a problem with the replay on two cameras after the firmware update. No motion detection is displayed in the replay. Should I reset the cameras after the update?
This is not user friendly. I know many other brands that make the resetting of the camera easy and very user friendly. I don't understand why you should make it so difficult to access the camera and to reset it.
Hey! Is it possible to reset an hdcvi camera? I mean the osd menú with no possibility to see the cam on dvr ( is not compatible)
Good explanation
Thank you
Thank You for Feedback.
My cam B1A21P does not have two “holes”. What can I do?
Thanks 👍👍
Welcome 👍
is there a way to short out certain pins to force a reset orfactory default of the camera from the ethernet jack? I keep reading on forums that when you update the firmware you need to do a complete factory default of the camera. sometimes the camera locks up and you have to climb a roof to reset a camera, this isn't practical, especially when the camera site is 40 minutes away.
Hi. Resetting by shorting the Ethernet is not a option I’m afraid. However other options are XML resetting. This process just requires a email to our Support Department and a separate network switch unless already on one. On a side note, for sure by the book you should Factory Default after a upgrade however unless it was a big jump like from 2018 to 2021 a factory default is not always necessary.
Can ye do a video on using the virtual host so to log in to the cameras via the recorders network port.
Okay. We will consider this. Thank You.
How do I reset speed dome camera DH-SD50230TN?
Behind the lens is a reset button that can be held for 20 seconds to reset.
thank you so much
Thank You for Feedback :-)
How do I reset an analog camera stuck in CVBS mode? The OSD menu can't be accessed.
If you use the Dahua UTC Controller this can help with this. ua-cam.com/video/ypYzSZh3IcQ/v-deo.html :-)
Hello did you solve the problem
@@furkanyldz8562 Nope. UTC Controller does not work. Once your camera goes into CVBS mode chuck it in the bin.
how to reset dahua b1a51p camera
Once you reset the camera, what is the default password?
Hi. Cameras now do not have default passwords. It's what ever you set . .
You can do it over the Nvr.
My own reste is not working
Firmware will reset too ?
No. Factory Default does not change the firmware state.
@@DahuaUKIreland Okay because I have a problem with the replay on two cameras after the firmware update. No motion detection is displayed in the replay. Should I reset the cameras after the update?
I suggest you speak with my team on support.uk@dahuahelp.com - If you have a analogue system they will need to know the model number. Thanks.
HELLO, if I reset the camera, will the password be reset too?
Please contact support.uk@dahuatech.com
Yes it will
This is not user friendly. I know many other brands that make the resetting of the camera easy and very user friendly. I don't understand why you should make it so difficult to access the camera and to reset it.