Dahua Technology TiOC 2.0 : Setup and Configuration v2
Вставка
- Опубліковано 13 жов 2021
- Total walkthrough, setup and configuration with our new TiOC 2.0 Camera.
⭐Go to the TiOC 2.0 Landing page below to get in contact with one of our sales agents.
dahuasecuritysolutions.co.uk/...
⭐Other TiOC 2.0 and PTZ Content links:⭐
TiOC 2.0 Advert : 3 in 1 Camera 2021 (1 min)
• TiOC 2.0 Advert : 3 in...
TiOC 2.0 Advert : 3 in 1 Camera 2021 (3 min) extended version
• TiOC 2.0 Advert : 3 in...
TiOC PTZ Demonstration
• TiOC PTZ : 3 in 1 Came...
The Best Cameras in the Market just Got Even Better!
The TiOC 2.0 and PTZ Cameras
⭐TiOC 2.0 - Multiple Technological Breakthroughs⭐
1. Flexible supplementary light mode, Provides full colour images even at night while minimising light pollution.
2. Powered by OPC (Optical Path Correction) Technology, delivering brighter and clearer IR images with an F1.0 aperture in Dahua IP cameras.
3. Powered by Dahua VoiceCatcher Technology to achieve longer pick-up distance and reduced noise interference.
4.Integrated with alarms system creating easier operation and a better end user experience.
⭐One Touch Disarming⭐
Convenient for operation and easy for integration
⭐AI Features⭐
SMD 3.0;
Perimeter Protection;
⭐Smart Dual Illuminators⭐
Flexibly switch between full-color and IR mode
⭐PTZ features include⭐:
Cross Fence Detection
Intrusion
Abandoned Object
Fast-Moving detection
Parking Detection
Crowd Gathering Estimation
Missing Object
Loitering Detection - Наука та технологія
Superb video. Helped me out enormously with setting up some of the basics for our home cameras (which previously I had no idea how to do). Thanks!
Thank you for your great response!
I've now installed a number of these types of cameras for the purpose of using AI and trip wire or intrusion.
First if these are being used commercially on tall buildings you may need an external speaker.
Second, for some reason they don't always work.
I'm using fixed, zoom and ptz tioc units.
The PTZ units are proving to be the best of the bunch.
Hi by not working do you mean the speaker? I did notice that on the older 2MP active deterrence too. I hooked up a strobe light to one, but the strobe had to be powered with a separate plug 24-7. Still works though from around 2019.
This is amazing. Well done for a detailed and informative video
Thank You for Feedback.
Hi Love this informative video , i just have a question i bought the 8MP version of this camera with deterrence tioc 2 , the problems iam having is there is alot of noise in the picture specially at night with the colour feature on and also doesnt adapt well to light changes at night, all that with terrible ghosting is there a setting to make it perform like an 8mp camera or fix these issues ?
Can you have it send notifications and record for motion during set times but then at nigh add in the alarm and lights?...can only seem to have one or the other
What a great video This has helped me a lot Thank you very much for the help
Thank You :-)
With regards to the access platform on the camera, this would only be accessible remotely if the cameras were on the LAN side rather than the POE ports subnet, so is there any other way to talk to the cameras remotely?. I sometimes open the ports 10080 etc to allow internal porting to the cameras through the NVR using virtual host, but it seems very buggy.
HELP NEEDED - PLEASE. I've got one TIOC 2.0 Camera connected to my Dahua NRV, but I believe I only have access to the NVR settings and NOT the actual settings for the TIOC camera it's self. When I go to the "ConfigTool", all I can see immediately is the NVR unit as being "initialized". I can't see how to add the actual camera to this list.
Afted i initialize it, is it possible to connect the camera directly to my router and use the dmss app or do i have to use an nvr?
What are your thoughts on AI coding VS general coding with VBR for saving disk space?
I have the same camera. Do you need camera connected to nvr for IVS to work. I did everything you did and my warning light blue red will not activate. Is there other settings that have to be changed. I tried trip wire and intrusion.
If you can step by step for me. I have to be missing something.
hi. for this camera push notification is free or not?
Excellent Video thanks from Israel
Glad you enjoyed it!
amazing job - what about storage? ( I may have missed this info) is an NVR required, is there a local storage slot (IE SD card) or are these devices on a subscription?
Hi Chris, Great video.
When using an NVR such as a 5216 should you still initialize the cameras and set them up this way or plug them directly into the NVR and set them through the NVR?
I would also be really interested on a how to video of linking an NVR and IP intercom together so the NVR will record the VTO camera and the VTH can display the NVR sub stream of the cams.
Thanks for feedback. Either way works for setup. Yep I can do a video on that solution suggested no problem 😀😀
ممتاز واصل شكرا لكم
!شكرا جزيلا لتعليقك الرائع
So if I hear you correctly for the alarm out leads there is a built in relay which will output 12v at 1 amp on an alarm event to drive an extra device like a sirene or a lamp?
Yes this is correct. Dahua relays have a 12V 1AMP electrical tolerance. You could use this effectively like a switch to control something low voltage.
What is your opinion on resetting a camera after a firmware update? some say you need to default the camera, others say you need to factory default it, and some say you don't need to do anything because it reboots after a firmware update.
Technical Support states that a factory default should be performed on any device after a firmware upgrade to remove any old firmware files or bugs if any.
Great video, thanks! Question... Is it possible to mask a certain area not to alert on SMD pedestrians or vehicles? Example, if you only wanted to be alerted for cars in your driveway but not on a passing street, that's in view?
Yes this is possible. If you set the region in VMD then it will control where SMD activates.
@@DahuaUKIreland Thank you!
Excellent instruction. Does this camera have to connect to an NVR? Could the mobile apps control or configure the settings?
Yes the device has front end AI. So a recorder is not needed if you wanted to go direct.
My preferred way to start up a new cam is to plug it directly into ethernet (poe of course) and enter the default ip address, once initialized then I plug it straight into the NVR and its good to go. Some cams give me an error message when I use config tool.
Thanks for sharing your feedback. It is great to hear from all our installers.
I need to see if you can give me some pointers. For the sub screen, I need to change the arrangement of the cameras which are on live view. How can I do this without having changes made to the main screen arrangement?
Hi Manny
Please can you contact Technical Support regarding this query.
support.uk@dahuatech.com
01628613500
Hello,some good work there,i was wondering if we can actually trigger alarm from other cameras without siren output to our Tioc?
Hi. If you use DSS then a cameras event can trigger multiple TiOC's at the same time :-)
Also, I have an lpr camera and I thought it was supposed to register in the nvr with license plate clips? Is it much more involved than that
Hi Manny
Please can you contact Technical Support regarding this query.
support.uk@dahuatech.com
01628613500
Hey! Great video and great channel, you helped a lot man!
Quick question:
If i activate the smart illuminator, can i set up the camera so the white led turns on only when motion is detected in a certain perimeter eg on my driveway?
If you are based in the UK Ireland here is our technical team that can assist with this query.
support.uk@dahuatech.com
Please note that we, as Dahua UK and Ireland, can only handle technical support inquiries for our region. Each query must go through the technical support team in the relevant country.
For technical support inquiries, I would like to advise you to visit www.dahuasecurity.com
Please select the appropriate region on the top right corner of the page and navigate to "About Us | Contact Us" for further assistance.
Thanks for the video. I have a balcony with a lenght of 7meters and a width of 2meters about. I'm thinking to use a camera like this to trigger an alarm to my system. It has enougth field of view to cover all the area? It is necessary to plug ethernet after the config ? It can trigger an alarm using a NO contact that will be close during alarm phase ? Thanks a lot and merry christmas.
Yes, the camera can work standalone. However the installation parameter is a height of 3 meters of a good accuracy of the camera.
How can we tell if a NVR has programmable alarm in port to use arm/disarm function? DHI-NVR4208-8P-4KS2/L doea not support it. Can you please advise which series do? Thanks
Hi Stan
Please can you contact Technical Support regarding this query.
support.uk@dahuatech.com
Hi Chris, great video.
I have a question related to the combination of the existing alarm system and Dahua NVR and TiOC 2.0 cameras.
I plan to install
1) 2 TiOC 2.0 cameras
2) NVR5216-8P-4KS2
and I already have installed alarm system with central and motion sensors (Paradox).
Do you think it is possible to realize following scenario
1) Paradox motion sensors detect a movement and send threat signal to the alarm central.
2) Paradox central send signal to NVR5216-8P-4KS2 (Alarm In port / NO)
3) as a consequence of above point, TiOC 2.0 cameras receive signal from the NVR which
activates TiOC 2.0 camera's :
a) siren
b) continuous blinking of red/blue led
In other words, I would like to use TiOC 2.0 cameras as a siren triggered by Paradox alarm (via Dahua NVR).
Thanks.
Please note that we, as Dahua UK and Ireland, can only handle technical support inquiries for our region. Each query must go through the technical support team in the relevant country.
For technical support inquiries, I would like to advise you to visit www.dahuasecurity.com
Please select the appropriate region on the top right corner of the page and navigate to "About Us | Contact Us" for further assistance.
If you are based in the UK Ireland here is our technical team that can assist with this query.
support.uk@dahuatech.com
Even worse, this 8MP is on the same sensor and CPU as a 2MP non TIOC camera so they had to limit bitrate and other parameters on the 3849 to try to make it functional, and the results are problems even during the day. So any type of AI will bring it to its knees.
In my opinion the 3849 should not be sold with that current MP/sensor and CPU combination,
Quick question.
Is it possible to schedule the IVS?
Need it to work between a scheduled period of time
Hi Erik
Please go through our technical support team and they will respond to this query.
support.uk@dahuatech.com
Great !! waiting for this baby in Pakistan :) :)
Coming soon... 👍
@@DahuaUKIreland Heard dual night mode & dual mic array is awesome in the v2
Thank you for this video. Could you please guide me on following points?
1) We have this camera installed for about 2 years and now we have changed our Wifi provider recently, I can't find anywhere on settings to change/connect the modem to the new Wifi.
2) On my phone, I have DMSS app installed and it works when I am at home ie connected with the same Wifi as the modem but not on mobile internet. Also, now we have new Wifi and my phone is connected to the new Wifi, I can't access cameras from my phone app!
Many Thanks
might be easier to change the new wifi ssid and password to the previous wireless router and all devices will reconnect
Which one is the video to set up the alarm in/out to the alarm panel on-site. Just bought 4 TiOC cameras for a job requiring that feature
Hi. I don't believe we have video on that such subject. However as long as you have the latest firmware under "Menu Menu""Alarm""Alarm In Port" you will see a disarming option that you can then connect to your alarm panel.
Can you show a video how to wire and use the alarm out from the camera to enable wifi smart switch to turn a existing light switch. Ie back porch light...or to enable exterior ir lights ie in the back yard to improve night time visibility.... for the camera
Do this with camera alarm output trigger not using nvr
Thanks Henri
I have added this in our content planning sheet for future consideration.
Hello everyone, fantastic summary. I own an IPC-HDW5241H-AS-PV (series 5 with Deterrence). It happens to me that I am not able to trigger siren and light when only VMD and SMD are active, the event is recorded, and the DMSS APP sends the notification of human presence, but does not trigger light/siren.
It only runs from IVS rules, is this so? Is there any way to solve only using human detection.
Thanks for your help.
You should contact support.uk@dahuatech.com FAO: Chris. We heard Chris has no issues.
My Mac don’t find Dahua camera. What?
Hi there, I have a 4 camera Dahua kit with the 4 channel NVR, I require an extra camera, does this mean I have to purchase the 8 channel NVR to accommodate the extra camera or is there something like a network switch box that I could add? Thank you.
4ch = 4 kameras , 8ch = 8 Kameras.
Hi Do you know how to set the time in because the alarm go off 24 hour do you know how to set up a night time and day time
Please contact support.uk@dahuatech.com
I just purchased a Dahua NVR 4.0 and Tioc cameras but the operating software doesn't look like yours and doesn't have all the functions. Any suggestions?
Hi Steve
Please note that we, as Dahua UK and Ireland, can only handle technical support inquiries for our region. Each query must go through the technical support team in the relevant country. For technical support inquiries, I would like to advise you to visit www.dahuasecurity.com Please select the appropriate region on the top right corner of the page and navigate to "About Us | Contact Us" for further assistance.
If you are based in the UK Ireland here is our technical team that can assist with this query.
support.uk@dahuatech.com
Thanks for the great review.
I am going to be pedantic though. SNMP is Simple Network Management Protocol, not mail protocol. :)
Thanks for the info!
Hay de estos vídeos en español gracias
Hi
Just installed a dahua tioc 2 camera with the active d. I have set up ivms ect but the line crossing won’t pick up until i come close to the camera which is strange. Also i have noticed the image is not very sharp like the regular 6.0 megapixel next to it . The image seems to be grainy
Hi. In regard to the detection. How high did you install the camera.
@@DahuaUKIreland Hi around 2.7-3.2 max .
Can I install fx. a bullet cam directly on a wall where it rains. Or must a Wall Mount be used for it to withstand rain??
Hi. You could do with a 32mm drill bit. It would be harder to replace/swap of make adjustments without a back box mind.
@@DahuaUKIreland It's wood and I can easily push the wire in. I've just read that you shouldn't put them directly on the house because the bullet cam would break after a few years because of water getting in. Thanks
@@MKAnr1 The camera comes with a waterproof RJ45 connector. I don’t see any issues.
I have installed those tioc 2.0, i have configured them as u have done in the video but once they are connected to dmss i do not recieve any message. I have activeted tripline and intrusion in the settings of the cameras but i receive 1 or 2 notification out of 40 passages. And then when i open the video up there is a LOOOOOONG loading until 97/98% where it became stuck and goes in timeout error "connection failed" and i cannot see the video until 30 minutes!!!!! The internet on the site is not awesome but still 30Mb/s down and 7/8 in upload. So where's the problem? It's not the first time that this happens and i'm a little bit tired. I think it could be a problem with configuration.
Hi. Okay let’s speak about configuration. Please contact support on 01628 200880 we can remote login and help.
What is the ideal sensitivity settings to just detect humans and vehicles? L would you say 25-30? Also do you leave anti-dither on the default settings? Thanks in advance
Hi. I suggest defaulting those settings and allowing SMD to control the triggers. Adjusting the sensitivity and anti-dither response time could work against the algorithm.
@@DahuaUKIreland ok great, will give that a go, thank you very much for your assistance.
Can you explain the P2P setup?
Super useful tutorial, Dahua UK & Ireland!
Are you able to share some tips/guidance or do a quick video demo how to get the cameras accessible via P2P?
More particularly, how you do the NW setup to get them outside of the internal IP address and grant public access via P2P?
I'm facing some issues setting the port mapping and the switch menu.
many thanks in advance!
I will add this to my content list. If there is a larget amount of requests for a certain topic we will make a plan to make a video for our audience. Thanks for your input.
@@DahuaUKIreland i agree.. p2p only works on cameras if you dont plug them into the nvr direct. some tutorials would defo be handy, i found nothing online regarding accessing them
Do you have to hook up a power I thought it only used Ethernet wire
Ethernet with PoE
Hi, I am having trouble with logging in to the web server as soon as im clicking the 'WEB' button. Can some help to specify how do I get an actual range of the ip address for laptop configuration?
Hi. Please use the browser Edge and ensure no pop up blockers are on. Other options are using a PoW switch and temporally bypassing the NVR for setup. You can also use a 12V DC power supply to power locally and then connect network cable straight into computer. Try the Edge first mind since we have no other reported cases for that issue. Thanks.
My tioc 2 interface is different to yours and I can’t see conditions. And also my smart illumination only has a on auto mode and constantly illuminating day and night and annoying my neighbours. Why?
Firmware perhaps . . You can contact support.uk@dahuatech.com to check the latest.
Thank you very much for the through video, much appreciated.
Do you have a video on the phone app features? Particularly the smart AI playback features. I really like the reolink app features and affordability but obviously prefer the quality of Dahua so might purchase Dahua if the phone app is good. Many thanks
Hi. Yes check out our channel for DMSS videos. There are many with more to come soon.
@@DahuaUKIreland ok, will have a look, thank you.
How to disable flicker red and blue in tioc 2.0 through web from pc thanks
If on webpage of camera, click Setting top right. Event on the left. Then Disarming. Change to enable.
Question.
How you conecte the input and output audio
Hi Cristian
Please contact support.uk@dahuatech.com
All the best
i bought the IPC-HDW3549H-AS-PV however in the web interface is missing the relay mode setting to arm / disarm. Does it depend on the firmware version? how can i solve the problem? i use (V2.840.0000000.18.R, Build Date: 2022-06-29)
Please note that we, as Dahua UK and Ireland, can only handle technical support inquiries for our region. Each query must go through the technical support team in the relevant country.
For technical support inquiries, I would like to advise you to visit www.dahuasecurity.com
Please select the appropriate region on the top right corner of the page and navigate to "About Us | Contact Us" for further assistance.
If you are based in the UK Ireland here is our technical team that can assist with this query.
support.uk@dahuatech.com
Even worse, this 8MP is on the same sensor and CPU as a 2MP non TIOC camera so they had to limit bitrate and other parameters on the 3849 to try to make it functional, and the results are problems even during the day. So any type of AI will bring it to its knees.
In my opinion the 3849 should not be sold with that current MP/sensor and CPU combination,
Hi. Dahua 3249H smart dual iliumination supported?
Hi. Unfortunately not. A 3249H is a TiOC 1.0 :-)
May i know how do you do the p2p except the platfrom access?
P2P can be done by scanning the QR code from your NVR display screen or from a camera when you login and click on Platform Access you will see the QR code again. It only needs to be on line and then enter your user name and password :-)
@@DahuaUKIreland is it worth spending extra for 8MP ?
Camera DH-IPC-HFW3249T1P-AS-PV-0360B
NVR DHI-NVR2104HS-P-I
Question:
1) I set up the IVS on the camera - both sound and light work (red - blue)
2) IVS settings from camra are not transferred to NVR ..... until you reboot NVR?
3) You set up the IVS on the NVR (by camera) - the settings are transferred to the camera (without rebooting). But when the alarm is triggered, the sound there is , but the light (red - blue) is not. Why?
4) You set the IVS on NVR (by NVR ) ------- when there is an alarm, on the camera there is no sound , no light (red - blue) Why?
Please can you contact support.uk@dahuatech.com for an immediate response to these.
Please sort some firmware out to allow notifications to be turned off when disarming these or NVRs!
New firmware already have this one click disarming function
While the 1-click disarming feature is good we are still working on a firmware to stop the push notifications.
IPC-HDW3849H-AS-PV does this new firmware also apply to this camera ??
No .. its new update in chipset
👍 As Above
tioc camera alarm and night light do not work at the same time
The config tool is loading a very small screen on my laptop why?
The DMSS is the best APP to use with this device. Thanks.
i have been using Tioc 1.0 and 2.0 for some time now, however i am unable to trigger the siren nor the red/blue lights Via the DMSS mobile app. do you happen to know when dahua will update the mobile application to resolve this issue? i tested these on 8MP tioc 2.0, tioc 1.0 and the 5MP tioc 2.0. i also tried this on the older gdms and still no luck.
Hi Michael
Please go through the Dahuasecurity.com site and select your country then click contact us for the Dahua Technical support team in your region. If you are based within the UK Ireland Please go through our technical support team at support.uk@dahuatech.com
How to put the TiOC alarms on a night time schedule is most important and asked about.
Hi. Main Menu, Alarm, Disarming . . . From the top you will see the ARM/DISARM schedule :-)
I just cant figure out how smart illumination works? At night i cross in front of the camera and the white light not work.
This is a TiOC 2 device correct? Check out this video: ua-cam.com/video/wrlNkQqWaR4/v-deo.html
@@DahuaUKIreland yes i saw that. My tioc 2 camera gets enought light to show me color image at night. No need for ir mode at night. To get the white light on when human appears it must on ir mode first?
@@nikolaspanagiotousecurity Hiya, No it needs to be on Smart Illumination Auto 😀
Finding cats and birds trigger this camera as human. Trips trip wires all the time even with SMD off.
We informed our support team and they are waiting for you to contact them - please email them at support.uk@dahuatech.com
clicking what at 4:20? I had to turn on subtitle to understand that part :).
Hi. The answer is WEB :-) It will load a webpage allowing to configure the device.
Just a question what mobile app do we use?
Hi. Please use DMSS :-)
Is the 5mp better than the 8mp in low light? Is there any downfalls going for the 8mp over the 5mp?
The lower the mega pixel the better picture quality in colour mode at night
Its all about personal preference. Our 5MP is the more popular and highest selling camera because its better in low light and a majority of the recorders respond better to a 5MP than a 8MP. Its more the higher end systems that can take 8MP cameras successfully. As a end user comparing the footage of both cameras the footage is indistinguishable unless you zoom in or you know what to look for. You will notice differences as mentioned only in a low light environment.
Even worse, this 8MP is on the same sensor and CPU as a 2MP non TIOC camera so they had to limit bitrate and other parameters on the 3849 to try to make it functional, and the results are problems even during the day. So any type of AI will bring it to its knees.
In my opinion the 3849 should not be sold with that current MP/sensor and CPU combination,
👍👍👍
Thank you for your great comments
How can we put alarm on and off on phone
Hi. Yes that is possible. When using the DMSS APP with camera on, press the two arrows pointing down. Then select the light bulb. Then you will see another light bulb to activate the lights and a bell to activate the siren. Thanks :-)
It takes 1-2 years for these cameras to reach the US side of the world, Amazon etc. Wish Dahua could setup a shop here in my country.
Please chase our team in the USA for products you are interrested in.
us.dahuasecurity.com/
Does this come in small dome ptz
Yes we have the TiOC PTZ ua-cam.com/video/FXg55mOZTs8/v-deo.html
@@DahuaUKIreland I was hoping dahua would come out with a smaller more descrete ptz for residental application...that dont look like prison camera
Could put video for samrtpss
Please note that we, as Dahua UK and Ireland, can only handle technical support inquiries for our region. Each query must go through the technical support team in the relevant country.
For technical support inquiries, I would like to advise you to visit www.dahuasecurity.com
Please select the appropriate region on the top right corner of the page and navigate to "About Us | Contact Us" for further assistance.
If you are based in the UK Ireland here is our technical team that can assist with this query.
support.uk@dahuatech.com
I can’t see conditions on my nvr
Please login to the camera. Condition features is a camera selection opposed to NVR. With front-end A.I. Technology is best to configure the front-end.
What is the difference between the two model numbers?
Hi Harley
IPC-HDW3849H-AS-PV is a 8MP Camera
www.dahuasecurity.com/uk/products/All-Products/Network-Cameras/WizSense-Series/3-Series/TiOC/IPC-HDW3849H-AS-PV
Spec *
8MP, 1/2.8” CMOS image sensor, low illuminance, high image definition
> Outputs max.8MP (3840 × 2160) @20 fps (AI function enabled by default)and supports 8MP (3840 × 2160) @25/30 fps
(when AI function disabled)
IPC-HDW3549H-AS-PV is a 5MP Camera
www.dahuasecurity.com/uk/products/All-Products/Network-Cameras/WizSense-Series/3-Series/TiOC/IPC-HDW3549H-AS-PV
Spec *
5MP, 1/2.7” CMOS image sensor, low illuminance, high image definition
> Outputs max. 5MP (2592 × 1944) @20 fps, and supports 4MP (2688 × 1520) @25/30 fps
great camera shame about the very poor outdated apps they use al chinese apps are below par shame really
Hi Brian
We value any feedback regarding improvements and suggestions to our products. Please let us know which software you are referring to and the problems you were having and I will relay this to the international team.
There have been many new major advancements and upgrades to DSS V8 which are featured below. We are covering these features and new additions every week in many of our video content. This has been received very positively in the Global market with many positive reviews.
DSS V8 2021 Launch : New Features
ua-cam.com/video/y-lMRWXpgEI/v-deo.html
DSS Agile 8
ua-cam.com/video/in1obHIqQMY/v-deo.html
DSS V8 18 min Run through
ua-cam.com/video/CTeEJ4aYzTE/v-deo.html
support.uk@dahuatech.com
Warning cat / dog / walking bird will set the alarm off 100% of the time Ai dosen't work
It’s best to speak with support.uk@dahuatech.com regarding installation requirements. When using front end A.I cameras it’s best to configure the front end so there could be a setting in the cameras head you have missed.
I’m having same problem, my dog is being detected even with sensitivity right down.
Even worse, this 8MP is on the same sensor and CPU as a 2MP non TIOC camera so they had to limit bitrate and other parameters on the 3849 to try to make it functional, and the results are problems even during the day. So any type of AI will bring it to its knees.
In my opinion the 3849 should not be sold with that current MP/sensor and CPU combination!!!!