How much did it hurt acceleration from a dead stop? I recently (today February 15th) replaced the old pulley with this one. And when the spree is on the kickstand it revs perfectly fine, but once I am on it it wants to die. It does take off, but not very fast. Also, my headlight blew once I revved it up.
@@Scooterswapshop can u make a dyno video of that vastro pipe when u guys got free time Alot of Hawaii guys say it's trash scorpion is better I feel as if it pulls harder with my ncy rotor kit I fkn love this set up
Do you need to a thrust washer behind this pully on the crank shaft? Not that any of the curb sprees I've found ever had the washer from the shop manual in there but lol had to ask.
Just out of curiosity,(I don’t own a Spree by the way) can one rejet their carb, add a mess cone air box, and slip on a mlm pipe, in addition to the new light weight ncy plate? I do know that the Spree is one of those bikes that one cannot do many mods to. Thanks
Thank you for your input. However, I DONOT own a Spree. May-may look into buying a Honda Urban Express in the future. Yes, Japanese quality and reliably is hard to beat. Some models can be easily modified and others, not so much. Nevertheless I thank you for now.😊
Did you ship out to germany?i think it is the same engine the Spree and the melody...sorry my english is Not so good ...ich dont unverstanden youre answer....im sorry
Keep the spree mods comming... thanks
850 ARE yea man
always working on new stuff all around
As stated, top end is great, but really dogs from a dead stop. On the fence if I will keep it installed or not.
I have a question about the Honda spree faster pulley I have a Honda spree 1986 if my belt is good condition do I need to replace it?
This mixed with that NCY 82cc kit modded to fit the spree would probably be a good fit
This Pulley rocks i picked up 7mph and im a big guy 210 lbs. Nice work guys!
How fast did you go?
How much did it hurt acceleration?
How much did it hurt acceleration from a dead stop? I recently (today February 15th) replaced the old pulley with this one. And when the spree is on the kickstand it revs perfectly fine, but once I am on it it wants to die. It does take off, but not very fast. Also, my headlight blew once I revved it up.
thanks!
Just ordered mine yesterday with a belt also new front tire! I'm excited to install the product onces it here
can you have some of those made for the Elite too?
Is there a video of this in action anywhere? I’d like to see how bad the acceleration is hurt before I buy.
Please do a dyno on that other vastro pipe i see behind u pipe b sounds crazy on my stroker
sorrry we didnt ever do that
@@Scooterswapshop yahh I still have it on my stroker 125 I love this pipe. Been sitting for 2+years >__
@@Scooterswapshop can u make a dyno video of that vastro pipe when u guys got free time
Alot of Hawaii guys say it's trash scorpion is better I feel as if it pulls harder with my ncy rotor kit
I fkn love this set up
my crankshaft splines are striped what to do(other than replacing the crank)
Replace the crank
Do you need to a thrust washer behind this pully on the crank shaft? Not that any of the curb sprees I've found ever had the washer from the shop manual in there but lol had to ask.
no it states that in the description.
Please come out with a bbk for the af05e
We’re trying to!
Just out of curiosity,(I don’t own a Spree by the way) can one rejet their carb, add a mess cone air box, and slip on a mlm pipe, in addition to the new light weight ncy plate? I do know that the Spree is one of those bikes that one cannot do many mods to. Thanks
Main jet only, no cone filter on a spree but yeah the exhaust and pulley will help we have the exhaust on the way in.
Will these be available again?
This week
Hello, just wondering if your billet pulley for your Honda spree, will work for a Yamaha razz,1987-2001? Just wondering?
no
Thank you for your input. However, I DONOT own a Spree.
May-may look into buying a Honda Urban Express in the future. Yes, Japanese quality and reliably is hard to beat. Some models can be easily modified and others, not so much. Nevertheless I thank you for now.😊
Right on! Make sure you give us a subscribe!
How much does this hurt acceleration?
quite a bit but it give you quite a bit on top
Damn this is why I support SSS always changing the game and helping us out by putting new products on the market
thanks! were trying to stay ahead of the curve :)
I can’t get the stock pully off
Kent Fuller if it’s seized Soak it in a good penetrant and give it some heat
Scooterswapshop okay thanks
Die IT work for my honda melody?
Did...sorry
works on what's listed on the website non variated af05
Did you ship out to germany?i think it is the same engine the Spree and the melody...sorry my english is Not so good ...ich dont unverstanden youre answer....im sorry
Will these work for the Yamaha razz?
no
PNW? How Far From Portland?
The shop is in Portland
Does this use an AX24 belt or stock belt?
stock
Got any in stock now?
Yes
Planning on restocking?
I saw one on the shelf today give us a email or call it could have been sold over the weekend we will be making more.
@@Scooterswapshop got any of those pulleys in?
Why can’t it use a variator
it wasn’t designed for one
Thank you.
Welcome!
1984 gyro Info
ask your questions.
Spree 2020
kyle salter just did my gears Taz bbk taz intake n 21mm carb mlm pipe. Make sprees great again 2020
ok
Just found your app - SWEEEEET.
awesome!
Just bought one
thanks for the support
More spree parts please
we have new exhausts on the way
PLEASE RESTOCK THEM
I can only make them so fast. They’re in line
are more of those being made now?