Thank you. It is not my saw, but you told me what the instructions were not. I needed to find the blade lock, and after that, tighten my blade fine, and my saw was back up and cutting again.
Thanks for this! I inherited a similar miter saw recently and couldn't figure out how to change out the blade. The thing must be 30 years old. Your video was exactly the guide I needed to figure it out.
I have a small maitre saw which I have really abused over the years,, and never changed the blade. I can now take the old one to Lowe's and replace my blade. Thanks for the video! Debra
Hatch is another Mass man! Lol I watch your videos also pal, I recently moved to Brockton but I'm originally from South Boston Mass... Great videos too bud!!!
I can't thank you enough for this video. It took me longer to walk out to my woodshop than it took to take blade off. I've ordered new blade, and had to order batteries for the laser light. In my area batteries(3) are hard to find.....GPA 76. You've put a smile on my face....Thanks again....
Amazing !!!! Thank you so much for this ... I didn’t even realize there was a “side button” to lock the blade ... I was stripping the hex nut abs getting frustrated. Thank you !
Thanks a lot sir I've been building and things for over 20 years. My problem I haven't had to change a blade in that length of time and I needed to know the direction to loosen it. It was just really tight thanks a lot my friend
Great video. The other one I saw said take the cover completely off. When I did that the spring came out and I can’t get the protection cover spring back in. Any suggestions or a video on that? Really appreciate any help.
ANOTHER informative video, good stuff pal! Spoke to Daryl today and it's honestly an honor that you guy's even know who I am because YOUR VIDEO'S are literally the 1st I started watching and basically the main reason that I got hooked on UA-cam videos! 😂👍✌️
Is there a way to tighten up the blade brake on these saws? Mine is almost to the point that it doesn't even stop the blade at all now... Is that something close to where you were working in this video?
Thank you. It is not my saw, but you told me what the instructions were not. I needed to find the blade lock, and after that, tighten my blade fine, and my saw was back up and cutting again.
Thanks for watching, glad i could help.
So much great info packed into a short video!
Thank you so much for the comment and watching hope it helps.
Thanks, Kevin! I misplaced my manual and thanks to you I switched the blade in about 5 minutes!!
Glad to help thanks for the comment and watching.
Thank you so much. Perfect instructions for an Ozito mitre saw.
Thanks for the comment glad to help.
Thank you!! I was going crazy trying to figure it out with the manual but you made it super easy!!
Thanks for this! I inherited a similar miter saw recently and couldn't figure out how to change out the blade. The thing must be 30 years old. Your video was exactly the guide I needed to figure it out.
Thank you so much for the comment glad to help.
Kevin you saved my cutting day!!! 🎉 thank you sir 🫡🙌🏻
Thanks for the comment glad to help.
Very good video thank you! Came here before changing it!
Thank you for the comment and watching glad to help.
You explained this Procedure very well thank you
You are very welcome so glad i could help.
Just the video I was looking for
Thanks
Thanks for the comment glad to help
Thank you so much. This was the perfect video for changing the blade.
Thank you glad to help Brian
I have a small maitre saw which I have really abused over the years,, and never changed the blade. I can now take the old one to Lowe's and replace my blade. Thanks for the video!
Debra
Thank you Debra you can do it.
Thanks for the video, glad I found this one first =)
Thanks for the comment glad to help.
Haha, thanks for the video. Was not understanding the instructions but then I saw this vid and it all made sense. 👍
Glad it helped!
Thank you! I just bought my first mitre saw and was nervous on how to change the blade. This was a great demonstration.
Thanks you Wanda
Thanks. Helpful
Thanks for the comment glad to help
This saved me a lot of time
Thanks
Your welcome
Thanks so much for the easy instructions!
Your welcome glad to help thanks for the comment and watching.
Wonderfully done!
Thank you for the comment.
Just joined your channel thank you for your time and videos
Thank you for watching
Thank you! This is my first time using a Miter Saw and I had no idea what I was doing trying to put a new blade in my new saw 😅
Glad I could help!
I haven’t changed my blade in years and didn’t remember the steps! Thanks for the video. I have the exact same saw
Glad I could help! thank you for the comment Fred.
Thanks!
Done!
Your welcome glad i could help
Thanks for vid. I was a bit stuck. New blade now on and clearly my old blade was very dull. New one cuts like you say. Hot knife thru butter
Thank you Chris glad to help.
Man, I need you to do a video on how to find your allen wrench so I can change my blade.
Lol thanks for the comment Daryl.
Regardless of the tool, don’t you just love a new blade. Helpful video Kevin, thanks for sharing it. Be well my friend.
That's for sure Hatch thank you for the comment.
Hatch is another Mass man! Lol I watch your videos also pal, I recently moved to Brockton but I'm originally from South Boston Mass...
Great videos too bud!!!
Thanks, mate. I'll be doing this for the first time tomorrow morning. You're a great help.
No problem and thanks for watching
Great guidance. Ty😊
Thanks glad you liked it.
My 10” Craftsman had a 1/2” nut instead of the allen head screw. I’d like to add that laser attachment to mine. Thanks for the vid!
They are great to have it really helps.
I can't thank you enough for this video. It took me longer to walk out to my woodshop than it took to take blade off. I've ordered new blade, and had to order batteries for the laser light. In my area batteries(3) are hard to find.....GPA 76. You've put a smile on my face....Thanks again....
Glad I could help I did a video on the laser light to if you need it
ua-cam.com/video/1sf4Bw6aTMs/v-deo.html
@@Robinson-Homestead Yep I got the old batteries out.....just had to order them GPA 76.....Couldn't find them locally. Thanks again for the videos....
@@robertstange8665 I had to go to Lowe's to get mine
Thanks, great video! Manual was horrible.....you made it look easy
Glad it helped! thank you for the comment Dennis M.
Amazing !!!! Thank you so much for this ... I didn’t even realize there was a “side button” to lock the blade ... I was stripping the hex nut abs getting frustrated. Thank you !
Thanks for the comment and watching
Nice to know Kevin! Thank you for sharing!
Thank you Paul.
Thanks a lot sir I've been building and things for over 20 years. My problem I haven't had to change a blade in that length of time and I needed to know the direction to loosen it. It was just really tight thanks a lot my friend
Glad I could help thanks for the comment and watching.
Thank you sir, going to do this Saturday 👍
glad to help
Thanks, you gave me the info i needed concisely and expertly. I'll subscribe to your channel.
Thank you Robert glad I could help thanks for subscribing.
Good instructional video Kevin.
Thank you Explorer.
Thank you
You're welcome thanks for the comment and watching.
Thank you. I now now was not sure.
Thanks for the comment glad to help.
Great video. The other one I saw said take the cover completely off. When I did that the spring came out and I can’t get the protection cover spring back in. Any suggestions or a video on that? Really appreciate any help.
This is exactly where I'm at right now. I'm heading out to my shop to try a different strategy. But this video is extremely helpful. Thank you :-)
Good video much needed information.
Glad it was helpful! Thanks for the comment Jim.
Thank you this was very helpful
Thanks for the comment and watching glad to help.
ANOTHER informative video, good stuff pal! Spoke to Daryl today and it's honestly an honor that you guy's even know who I am because YOUR VIDEO'S are literally the 1st I started watching and basically the main reason that I got hooked on UA-cam videos! 😂👍✌️
Thank you for watching and the comment Bobby my friend.
Thanks Kevin! Very helpful for a newbie like me :-)
Happy to help!
3:25 I removed the screw but cannot remove that washer, it looks stuck on the blade. What could be the issue? Many thanks,
Hit it with something.
Hit it from behind with a rubber mallet. It worked!. Thank u Sir @@Robinson-Homestead
Nice tip video! Keep them comming. Lean alot from ya!!🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸
Thank you William.
I was hoping you would make a note of which direction the blade is supposed to turn
The Edge goes to the saw on the bottom.
Beautiful video! Worked great for me. Only difference was I have an older saw with a normal bolt (not a hex wrench).
Glad it helped
Same here! Worked great.
Thanks
Thank you for watching and the comment
Is there a way to tighten up the blade brake on these saws? Mine is almost to the point that it doesn't even stop the blade at all now... Is that something close to where you were working in this video?
I'm not sure mine doesn't have a break.
good. job
Thank you Nan Nguyen.
What is the model number on your unit? My guard is missing and the identifying sticker is not Legible. Thanks
Model 315.243130 It has a customer help line to
1-800-932-3188 hope this helps thank you for the comment and watching.
What size Alan head on blade bolt
How can i get oñe bolt fòr my chop saw charft man
You might have to contact the saw manufacturer about it sorry i can't help.
Can you add a palm sander to your Amazon store? I need one for the work on my Runaway Camper and want to get one from you.
Debra
👍
Thank you Pete.
Adjust Tuscany tub faucet
Thanks for watching