@ thanks . Where u from. And which glass pencil are best for coutting ?
5 років тому+1
@@pakboy8202 I'm from Brazil!! the best glass cutter, without doubt is the Toyo TC 90, it is made in Japan and has proven quality, it is the most used by professional glaziers !!!
At 2:05 you did not seem to apply any pressure, but at 5:40 you had to. Any reason for this difference? I tried doing the same as you've done at 2:05 and waited a while and nothing happened! How did that happen for you!
Kerosene is used to clean the glass. It cleans it suuuuuper super clean as long as you use a microfibre cloth. The cleaner the score line / cut line, the cleaner the cut.
Glass cutters usually have a wheel of hardened steel or tungsten carbide which scribes the glass surface. As seen here, better cutters have a liquid reservoir which contains cutting fluid and here the area which was scribed had been cutting fluid applied also. First cut, the off cut was apparently heavy enough that it broke without force, the 2nd cut had to be forced. Depending on the thickness of the glass you have to choose the right cutter. Thicker glasses require bigger cutting angles of the cuttin wheel. Recommended cutting angles are from 120° for 2-3 mm up to 165° for 19-25 mm thick panes of glass. Random fact: To this day, it hasn't been scientifically fully explained how the physics behind cutting glass works...
Wadfow es el q tengo en azul y lo puedo usar para selocias? Yo pregunte en la la ferrretería x lo q se no saben agua me dijo! Y yo no puede emparejar las selocias xq son muy grandes?
Wow this is incredible! So you do not use cutting oil in the knife .... but kerosene? Would you recommend any different techniques for cutting thinner glass of 2mm?
I used to use Shaw wheeled glass cutters that had to be dipped in oil before use, then changed over to an oil cutter. Also used a wooden T square with tape on the back for getting the line straight and true.
Esse toyo é o mesmo que encontramos na internet por 65 reais?
Рік тому
Com certeza por esse preço não é o original, pois o original custa três vezes esse Valor !! De uma olhada nesse link: produto.mercadolivre.com.br/MLB-2781533811-cortador-de-vidro-toyo-tc-90-legitimo-black-friday-_JM
@@mikedalakis5292 That's right, the liquid is just kerosene, it makes cutting easier and protects the cutting tool's video, it makes a big difference in cutting, if you look at the Toyo TC 90 cutter there is a reservoir that I put kerosene in it to act lubricating the occasion scratch on the glass.
Primeiro deixo um like monstro porque sem falar UMA ÚNICA palavra mostrou o serviço na humildade de quem detém o conhecimento. Porém, preciso de ajuda. Vi nos comentários sobre a marca do produto pra cortar o vidro. Tem que ser da marca específica ou há outra marca que tem o mesmo resultado? Se puderem me ajudar com essa minha dúvida já deixo antecipadamente meu muito obrigado.
4 роки тому+2
Então Max essa marca que utilizo, é uma das melhores quer existe atualmente, ela é bem confiável, se trata de uma marca japonesa bem consolidada no mercado e quando o assunto é cortador de vidro ela desponta sempre na frente, sei que os profissionais que trabalham em vidraçaria utilizam muito esse cortador, !! Não sou profissional, sou hobista e certa vez comprei um cortador xing ling e simplesmente não consegui bons resultados, por fim acabei desistindo e comprando esse que é muito badalado e produz excelentes cortes... as vezes o barato sai caro, vc compra um produto por ser mais em conta e acaba passando raiva e frustração na hora que precisa... esse cortador até que não é tão caro, dado ser um excelente produto, se estiver pensando em adquirir um, esse é o produto que vai durar uma vida se bem cuidado!! Valeu, aquele abraço!!!! PS: só tome cuidado na hora de comprar pois tem muitas falsificações por ai!!!
@ ETA que agora virei fã. Depois de ter postado há anos, ainda respondeu minha dúvida. Atitudes assim que diferenciam as postagens EM QUALIDADE. Mais um inscrito. Qbraçps
Taí gostei temos mesmo e de ensinar para outras pessoas aquilo de bom que dominamos na arte no conhecimento além de sermos lembrados mesmo depois que o criador nos recolher nosso conhecimento que foi transmitido a outros será útil Será como a semente plantada em boa terra dará frutos.
5 років тому
Valeu mesmo de coração meu amigo, palavras assim é incentivo para produzir mais e melhor!!!
JIG Super Estiloso e funcional para afiar as facas do desengrosso DW-733 ua-cam.com/video/suco0834avs/v-deo.html
Which oil are u use
@@pakboy8202 Am I using kerosene?
@ thanks . Where u from. And which glass pencil are best for coutting ?
@@pakboy8202
I'm from Brazil!! the best glass cutter, without doubt is the Toyo TC 90, it is made in Japan and has proven quality, it is the most used by professional glaziers !!!
@ ok thanks for information , i am from pakistan and i work at Saudi Arabia nice to meet U 😘
Who are Indians here...!!!🇮🇳😁
At 2:05 you did not seem to apply any pressure, but at 5:40 you had to. Any reason for this difference? I tried doing the same as you've done at 2:05 and waited a while and nothing happened! How did that happen for you!
Leverage, he touched the end of glass at 2:02 and you can not see that in video.
Do you need that liquid to cut the glass or is it simply for making the cut easier and smoother?
Kerosene is used to clean the glass. It cleans it suuuuuper super clean as long as you use a microfibre cloth. The cleaner the score line / cut line, the cleaner the cut.
Hi, can you explain how the cutter works? I find it mind blowing that it can cut thick glass
Glass cutters usually have a wheel of hardened steel or tungsten carbide which scribes the glass surface. As seen here, better cutters have a liquid reservoir which contains cutting fluid and here the area which was scribed had been cutting fluid applied also.
First cut, the off cut was apparently heavy enough that it broke without force, the 2nd cut had to be forced.
Depending on the thickness of the glass you have to choose the right cutter. Thicker glasses require bigger cutting angles of the cuttin wheel. Recommended cutting angles are from 120° for 2-3 mm up to 165° for 19-25 mm thick panes of glass.
Random fact: To this day, it hasn't been scientifically fully explained how the physics behind cutting glass works...
@@TheRealObiWahnthank you! Amazing!
you dont show clearly which part of tip you use mate, so annoying, big DISLIKE
O cara não abriu a boca, e sua explicação ficou mais clara do que algumas pessoas que faz muito caras e bocas.
Kkkkkk obrigado pelo comentário Maria Lúcia !!!
Good evening, I'm sorry, this method is fineا Glass is wrong and dangerous
Que usa el corta vidrio? Agua o aceite yo tengo el azul
Querosene!!
Wadfow es el q tengo en azul y lo puedo usar para selocias? Yo pregunte en la la ferrretería x lo q se no saben agua me dijo! Y yo no puede emparejar las selocias xq son muy grandes?
You never show how you separated the glass, after you place the pencil under them.?.
Now I give it a try. Wish me luck.
Hahhahhaha
Wow this is incredible! So you do not use cutting oil in the knife .... but kerosene?
Would you recommend any different techniques for cutting thinner glass of 2mm?
A Diamond Cutter is good for thin glass.
عملت مثل ما شفت على الڤيديو ما قص الزجاج وبعد السؤال وجدت أن ألماظة الزجاج ثمنها ٣٠ دينار والملاحظة انك ما جبت سيره عن هذا الحكي
Chinese replicas cut well. But not as long as TOYO original
😆 चाचा जान इतनी देर में तो कई सीटें करती हैं जितनी देर में आपने दो पीस कट करें हैं 🤣🤣🤣🤣🤣
I used to use Shaw wheeled glass cutters that had to be dipped in oil before use, then changed over to an oil cutter. Also used a wooden T square with tape on the back for getting the line straight and true.
Hello everyone, I'm also a glass cutter, all of you interested can access my video mail
I am an idiet. What is cutting angle? from where to where?
100 percent ba ya. Makaka potol Ng tiles
I did not understand why cutter like this should to spin around? What is the seecret of this cutter?
I find this incredibly satisfying :D
S90s
like
Tú no has cortado muchos cristales visita mi página para que veas cómo se corta un cristal cristalería Guerrero
Fue el primero en ver que hice esto, así que estoy realmente mal ... ¡Gracias por comentar, intentaré mejorar!
I will try your method as it works well. Thank you for uploading this nice video
Bhusnavya Chandra is watching this.
Should never stop your cut and not sure what tape is for, but I agree glass being cut and snapped is satisfying
I think the tape is used to keep the straight edge from moving while cutting.
meu amigo para que serve esse parafuso no riscador
Serve para regular o fluxo de querosene que lubrifica o "diamante" .
What a Perfect cut for a 10mm!!😊
Tanta mamada para cortar 20cm de vidrio?
What is this you use before you cut is water or what it is
Esse toyo é o mesmo que encontramos na internet por 65 reais?
Com certeza por esse preço não é o original, pois o original custa três vezes esse Valor !!
De uma olhada nesse link: produto.mercadolivre.com.br/MLB-2781533811-cortador-de-vidro-toyo-tc-90-legitimo-black-friday-_JM
Hello sir new friend here..very nice skills love it.....sending ❤️ and support here
Mohon saran
Bagaimana mengatasi
Potong kaca bekas pakai sebab saya memotong selalu gagal pecahnya tidak sesuai yg saya gariskan
*MOHON SARANNYA*
видео из серии "мама я покакал!"
Am de vânzare așa diamant de sticla T17 și T90
Pe bază de ulei direct
This really looks like tempered glass is that what this is?
Smoooth.... going to try now on half inch glass, need for back door .thnx
Wow !! That is amazing. Can I ask what liquid you applied to the glass before cutting it?
OK, I answered my own question. It's Kerosene.
@@mikedalakis5292 That's right, the liquid is just kerosene, it makes cutting easier and protects the cutting tool's video, it makes a big difference in cutting, if you look at the Toyo TC 90 cutter there is a reservoir that I put kerosene in it to act lubricating the occasion scratch on the glass.
How much glass cutte see
bad camera man suck can't see the whole cut and break glass bro
Nice video sir 🎉🎉
Excuse me, what kind of liquid do you use before cut?
good
p
Dmitriy mi kak rejim
Onde compro?
Great work
Essa marca é muito boa ,Trabalhei durante 8 anos numa empresa com diamante semelhante a esse..
... em minha opinião é a melhor mesmo, totalmente confiável e durável, o "diamante" não chega a ser eterno mas dura muitíssimo rsrsrsss
Hello everyone, I'm also a glass cutter, all of you interested can access my video mail
What type oil?
Great ❤❤❤🎉🎉🎉🎉
Ye cutter kaha se milta h.
Thank you! 🥹
durasi+
បងមានលក់អត់
people who disliked it is because of the noise😂
I assume it's untempered glass
Fine
noice
Mas que legal e facilidade que você tem, parabéns... Um Forte Abraço Amigo!!
WOW Simple, straight to the point.... THANK YOU
Wow this simple triks
Can we use thinner instead of kerosene?
Your cutter sounds super dry
for 12mm glass..what series of toyo cutter do you recommend?
TOYO TC-30
TOYO TC-600
YOYO TC-10
TOYO TC-17
Glas 6 mm
尺不專業
Sebelum di potong kaca nya.di olesin cairan apa itu bos
Cairan itu hanya minyak tanah, itu membuat memotong dan melindungi pemotong lebih mudah
Salam satu hoby kawan 👍👍
Labareda
When glass cutting is magic.
Amator
Hobista!!
o presos do dimante
Primeiro deixo um like monstro porque sem falar UMA ÚNICA palavra mostrou o serviço na humildade de quem detém o conhecimento.
Porém, preciso de ajuda. Vi nos comentários sobre a marca do produto pra cortar o vidro.
Tem que ser da marca específica ou há outra marca que tem o mesmo resultado?
Se puderem me ajudar com essa minha dúvida já deixo antecipadamente meu muito obrigado.
Então Max essa marca que utilizo, é uma das melhores quer existe atualmente, ela é bem confiável, se trata de uma marca japonesa bem consolidada no mercado e quando o assunto é cortador de vidro ela desponta sempre na frente, sei que os profissionais que trabalham em vidraçaria utilizam muito esse cortador, !! Não sou profissional, sou hobista e certa vez comprei um cortador xing ling e simplesmente não consegui bons resultados, por fim acabei desistindo e comprando esse que é muito badalado e produz excelentes cortes... as vezes o barato sai caro, vc compra um produto por ser mais em conta e acaba passando raiva e frustração na hora que precisa... esse cortador até que não é tão caro, dado ser um excelente produto, se estiver pensando em adquirir um, esse é o produto que vai durar uma vida se bem cuidado!! Valeu, aquele abraço!!!! PS: só tome cuidado na hora de comprar pois tem muitas falsificações por ai!!!
@ ETA que agora virei fã. Depois de ter postado há anos, ainda respondeu minha dúvida. Atitudes assim que diferenciam as postagens EM QUALIDADE. Mais um inscrito. Qbraçps
👍👍
Timper glass cutting possible
Can you score twice if needed
How did it brake wit to riffle ?
El999
All tayps glass cuting .round oval . Squair .heart
So9o
What is that acid name
L
El9999ร่าค่าท่ใดคัรบ
Nice
Good job well done, I want to know the liquid that you put on the bottle please ??
it's kerosene.
Good job...
Estupendo! Gran maestria mi estimado.
Coba potong kramik granit roman ...kalau gak pecah 2
What is querosene labareda?
Taí gostei temos mesmo e de ensinar para outras pessoas aquilo de bom que dominamos na arte no conhecimento além de sermos lembrados mesmo depois que o criador nos recolher nosso conhecimento que foi transmitido a outros será útil Será como a semente plantada em boa terra dará frutos.
Valeu mesmo de coração meu amigo, palavras assim é incentivo para produzir mais e melhor!!!
BBC CV ch Cuddy 6 tarah you Weⁿ hp
H aqq00
@ ''/
What s the liquid?
Wow nice job,
Saya punya juga tc 90
Мене вчили різати без лінійки!
Ai є інший рівень, без лінійки тільки краще, мені потрібно керівництво для прямих скорочень! Дякуємо за коментар !!!
What using this oil
What is this liquid????
wonderful how did u do that without pressing
The weight of the glass was enough to break it along the score on the first cut. But he used pressure on the 2nd cut if you watched the whole video.
waaaaw thanks bro you very smart and clean job
TC30 R👍👍