How to change the BRUSHES of an RDM pro jigsaw electric MOTOR.
Вставка
- Опубліковано 29 вер 2024
- How to change the BRUSHES of an RDM pro jigsaw electric MOTOR. In this video tutorial of EASY Projects with MOTORS and other ELECTRICAL machines we are going to rescue from the trash an RDM jigsaw that at first only lacks the plug, before starting the video remember that we are going to work with the mains voltage in This case for Spain 220/230v and as you well know it is quite dangerous to take all precautionary measures before handling a jigsaw, we put the plug in and see that it works correctly, we take the opportunity to do maintenance on the machine, we are going to open it, Clean it, grease it, as soon as we open the machine we realize that it has a problem, one of the brushes is making contact on the outside of the collector, we already take the opportunity to clean the collector, we are going to take it out and sand it with a fixed 500 grit sandpaper. After that, we are going to install some brushes in good condition, I am also going to explain how to install them easily, we are also going to remove the old grease and install new grease, we are going to blow out the machine, and apply contact cleaner to the parts, and While we do all this, I'm going to explain the parts of the jigsaw, both inside and out, and at the end of the video we're going to place a wood saw and see how the machine cuts. If you like the video, don't forget to leave your like thanks.
Buen toturial de mantenimiento y reparación! Ademas explicada todas sus partes. Like amigo 😊un abrazo
Gracias amigo un Fuerte abrazo Fran
Buen video como siempre.
Yo tengo una Dremel que al usarla va perfecto pero al rato se para sin previo aviso, aunque enciendas y apagues o desconectes el enchufe no vuelve a encender hasta el momento que lo hace de forma repentina y sin aviso. He comprobado moviendo el cable o sacudiendo un poco el aparato para ver si pueda ser un mal contacto, ahora mismo no se que podria ser
Hola. Siempre didácticos sus videos. Un saludo.
Gracias muy agradecido la verdad
Muchas Gracias
Gracias a ti amigo
5:57 REGULARMENTE EL PR0BLEMA DE LAS ESCOBILLAS ES EL DESGASTE, PERO EN ESTE CASO
PARECE PR0BLEMA DE DISENIO, TIENE MUCHO ESPACIO ENTRE LA BASE DE LA ESCOBILLA Y
EL COLECTOR, SALUDOS
Si es posible que si gracias
Querido George necesito tu ayuda. Una television de 1080 a partir de ahora es inutil?. Hay forma de verla ? Como siempre gracias por tus videos gallego.
Una maravilla. Parece mentira, indagnado un poco, como se pueden arreglar las cosas. A partir de ahora miraré bien si puedo arreglar antes de tirar. Muchas gracias y un saludo
Muy buenas tardes profesor saludos y bendiciones y le anhelo muchísimos éxitos en sus próximos videos tutoriales para el presente y en el futuro.Excelente clase ,cuente usted con mi apoyo al canal,continuamos percibiendo de sus enseñanzas que nos favorecerán y prepararnos en técnicos de las magníficas labores que desempeña en sus actividades,siga adelante.atte desde Venezuela 😊
Gracias amigo muy agradecido
Buen trabajo Yoorrss 👍👍
Gracias George Clooney
Yo tiré la mía 🤦🏻♂️
Eres muy bueno amigo
Gracias amigo
Bom dia vídeo ótimo
Gracias un saludo
👍🤝👋👋❤️
Gracias amigo
Gracias por el video me sirvió de mucho. Podrías subir un video para mantenimiento para taladros inalambrocos dewalt ppr favor amigo 👍👍👍❤❤❤
Vale perfecto lo voy anotar
Yo desmonto el colector y lo pongo en el taladro de columna y con una lija en un momento está limpio
ua-cam.com/video/XTVfBGVfvpU/v-deo.htmlsi=efti7LtLPq5UMI5k
Buen mantenimiento, sí señor. Un abrazo Oscar.
Gracias Fernando un abrazo
💯💯💯👏👏👏💯💯💯
Gracias
Buen vídeo muy interesante, me gustó
Gracias muy agradecido
Que buen trabajo brother, me encantó el vídeo, felicidades 👏👏👏 saludos 👋👋👋👋
Gracias brother me alegro que te guste