I had exactly the same build issues as you did, the handle bar install had me puzzled for a moment. The side stand didn't work as the bike fell over until I realised the tyres only had 4 PSI in them. Pumped up the tyres to 35 PSI and the stand worked. Then I couldn't turn the battery on as I didn't realise the power button was underneath the thumb switches. The throttle didn't work either until I went through the parameters. I haven't mastered changing to MPH yet but I will, I only assembled it a few hours ago. So on my first quick ride I hit 33 kmph on the throttle after I got it working. I have lot's of tweaking to do and the manual for the display is 20 pages of information to absorb. The absolute worse thing about this bike is, that when you fold it in half it falls over as there's no support bracket. Great video and now I don't ned to look at the manual to change to MPH.
I really liked the video you made, it has so much details and really nice. I would be so glad if you can make a full elecrtic mode and pedal assist range test. I will be following you, good lucks :)
Hi, i ordered a c20 pro and i think they made a mistake with the frame, i'm searching for the frame code do you know what it is ? it's located on the front above the forks and just above the engwe logo.
MJ Tech@ Hi, if you would help me to figure out how could I fix problem with my front wheel on just arrived Engwe . Front wheel is not moving freely because the brake disc (Pistons) are too tight and keeping stopping the wheel. I cannot separate them the way it could be done on regular bike (i tried to remove a pin and reinstal Pistons) as well as I cannot do nothing with screwdriver (imbus key) because the distance between them is already set on maximum so I can only make them more tightier. I do not know what to do..also I do not see that the wheel runs wobelly when turned..Can you show us what could be done with just unboxed engwe bike front wheel malefunction in such case?
Nope, there are plenty of different qualities of batteries. It would also help that this bike doesn't need that high discharge rate, so can get high capacity ones instead. That is also why the 500W version have a much smaller battery.
My opinion is that the company laughs at you, they are not serious at all. The first thing: my bike arrived damaged by transport, and they do not give me a solution other than a video that is of no use to me, the repair costs me €23 (the change of the crooked bicycle). The second thing: the battery does not fulfill what was promised nor does it come close to reality, it does not drive me more than 65 kilometers, when my weight is 60 kilos. (either I got a defective battery or I don't know) The third thing: the very bad brakes, the battery inside is half loose, hitting the inside in the potholes, and the front brake is misaligned and rubs against the brake, it also doesn't start to rain... since it only has waterproof (ip2 ). For the rest good... but too many negative points. I wouldn't buy it again.
I had exactly the same build issues as you did, the handle bar install had me puzzled for a moment. The side stand didn't work as the bike fell over until I realised the tyres only had 4 PSI in them. Pumped up the tyres to 35 PSI and the stand worked. Then I couldn't turn the battery on as I didn't realise the power button was underneath the thumb switches. The throttle didn't work either until I went through the parameters. I haven't mastered changing to MPH yet but I will, I only assembled it a few hours ago. So on my first quick ride I hit 33 kmph on the throttle after I got it working. I have lot's of tweaking to do and the manual for the display is 20 pages of information to absorb. The absolute worse thing about this bike is, that when you fold it in half it falls over as there's no support bracket. Great video and now I don't ned to look at the manual to change to MPH.
I really liked the video you made, it has so much details and really nice. I would be so glad if you can make a full elecrtic mode and pedal assist range test. I will be following you, good lucks :)
What's happened, where's the full review promised in the vídeo?? I really like to see the full bike review...
my dear!exellent - 👽
I just ordered this one instead of the ep2 pro... Looks awesome!
Exactly as described
A real range in full electric mode please😉. Thank you for this video
Will do!
my dad just bought this but are the throttle activated right when you've assembled the bike?
So where is the full review? I'm really curious. What do you think about the bike after 5 months? Thanks in advance!
With the display you can actually speed hack the top speed, but be warned it will wear down your battery life quicker
can you hack the speed of the bike using the lcd settings? great video
Yes, but you will wear down your battery life quicker, i think Top speed is 60 Kmt, but not advisable with these brakes
is it possible to put a rear rack? do you have any links for some luggage rack that is good for the bike?
What’s it like going up hills ??
⚡🤙🏼⚡
How to turn on the tail light?
Mine isnt working
Cost; $749.99 at Engwe, $639+$60 S/H on Amazon... (Save $51)
SPECS
Battery: 48V 10AH (For 500W Model)
Tires: 20*3.0 inch Anti Puncture All Terrain Fat Tires
Motor: 48V 500W (PEAK 850W) high-speed brushless motor
on my c20 in pro, I only do 16 km in full electric. how much are you?
oh my really?
That sounds like a faulty battery
Do you know about the throttle activation and disabling?
does it have the CE certifikat?
Hi, i ordered a c20 pro and i think they made a mistake with the frame, i'm searching for the frame code do you know what it is ? it's located on the front above the forks and just above the engwe logo.
how tall are you?
Sad that is special handlebar, this bike would look good with a bmx handlebar
Only with minor mods it can be done!
MJ Tech@ Hi, if you would help me to figure out how could I fix problem with my front wheel on just arrived Engwe . Front wheel is not moving freely because the brake disc (Pistons) are too tight and keeping stopping the wheel. I cannot separate them the way it could be done on regular bike (i tried to remove a pin and reinstal Pistons) as well as I cannot do nothing with screwdriver (imbus key) because the distance between them is already set on maximum so I can only make them more tightier.
I do not know what to do..also I do not see that the wheel runs wobelly when turned..Can you show us what could be done with just unboxed engwe bike front wheel malefunction in such case?
how do you lock this bike outside?
With a bike lock???
Fiido d11 or c20 pro?
It is impossible that the battery has 19.6mah capacity.
Nope, there are plenty of different qualities of batteries. It would also help that this bike doesn't need that high discharge rate, so can get high capacity ones instead. That is also why the 500W version have a much smaller battery.
I think the saddle pin will bend if you are long and extend it all the way. The angle is too much.
My opinion is that the company laughs at you, they are not serious at all. The first thing: my bike arrived damaged by transport, and they do not give me a solution other than a video that is of no use to me, the repair costs me €23 (the change of the crooked bicycle). The second thing: the battery does not fulfill what was promised nor does it come close to reality, it does not drive me more than 65 kilometers, when my weight is 60 kilos. (either I got a defective battery or I don't know) The third thing: the very bad brakes, the battery inside is half loose, hitting the inside in the potholes, and the front brake is misaligned and rubs against the brake, it also doesn't start to rain... since it only has waterproof (ip2 ). For the rest good... but too many negative points. I wouldn't buy it again.
Apparently poor parts