Red Messages in SCR Part 2
Вставка
- Опубліковано 15 лип 2024
- Red messages in SCR Part 2 like the first, this will show you a few of them and how to do them.
Timestamps:
0:00 Intro
0:18 Too many stations missed
2:31 Too many emergency brake applications
0:51 The 2 skipped stations applies to short routes or AirLink. It can be up to 3 with Connect.
ok thanks for telling me
It’s now infinite for some reason
It's now 2 for every operator 💀
don't do this on public servers, this was done on a VIP server
Veronica Jackman this game is based off of London
OnTheRightTrack.
Your channel deserves at least 6x as much subs as you have right now
Max's Trainspotting thx :)
now he has 582 and 6x means3492 6x that is is 20952 and then finally 6x that is 125712 so he will be verified and get silver play button
This is so nostalgic
there's another Red Message: Invalid Track Detected
Example: James Street if you overshoot
William Matthews James street is mysterious
Thanks for the suggestion
@IE Trainspotter Leighton City was in the past
My friend Micha has a VIP server and sometimes I signal her and it’s so much fun!😀😀😀
glad to hear it. :)
There are 3 red messages that I found:
1: Stop before trying to load.
2: Maximum tilt exceeded
3: Please continue until the train is fully alongside the platform.
Just third is easy
The first and third are on the driving UI
Thanks for the suggestions
Bruh that's not the despawn red signs
@Trainszzz It's for every device.
Here is another one: Maximum tilt exceeded
Simply go onto a curved track and drive very fast.
It also hapeipepmd when you go over a joint changing tracks
@@MaxsTrainspotting r/ihadastroke
I remembered when the 158 was released, I would always go up a little ramp onto a bridge and it would bend and respawn me. Just like when I rounded a bend at 110 mph with my 802 and I would hit the wall.
ok
That happened when I was a TD driving the 319 in a 1.0 version, I was just entering Benton from Port Benton, and then it said Maximum tilt exceeded. This was before speed limits were really implemented.
I had an “Irreparable Movement Control Failure” redscreen and my train broke.
Also turns out if you are idle in a depot for 10 minutes or more you get a redscreen.
Got held in Coxly siding for such a long time a few days ago that my train despawned- “Train idle for too long” or words to that effect
al66class59 Ireeparabke Movement Control Failure means your train derailed
There’s one for not releasing the emergency brake after an SPAD or AWS
Message Name: Waited too long while accepting brake release
There's also one: delay 30 minutes
Ik but I would have to wait like 30 minutes
Also AFK 30 min
I got that one before I was on express from SC to Llyn-by-the-sea and I ended up over half an hour late and I think it was due to lag.
@@kacper2290 but the max afk time for afk in roblox is 20 minutes
@@OnTheRightTrack Do it without on UA-cam in the screen
You missed one. The 'Your schedule has been cancelled for been more that 30 minutes late'
That happen to me but it was more than 20 minutes late
Thanks for the suggestion
@@OnTheRightTrack This happens to me in roblox on SCR by that dumb train going too slow and delaying me and get a dispatcher mad
0:54 It depends on how many stops the route has!! Not always 2. If your doing a long Connect Route like SC to Llyn, it can be up to 6 or 7 or even 9 stops skipped
If the route has a lot of stations, it is about 3, not 6.
ok
I’ve skipped 11 stations tho…
yay
you cannot skip the the first stop the first is right so you cannot skip the first stop
When u said skipn2 stn there was 2 red massage in total so u did extra nice
yes lol
There’s also irrecoverable movement control failure, it happens when a junction changes while you’re on it. I think you just basically floor it on the Airlink junction after Morganstown going towards the airport, also it’s probably very rare this way but I got it for crashing into the buffer at Greenslade going 100 mph instead of getting buffers don’t like to be eaten for some reason
I might try that if i do a part 3
I found a red message that said “invalid route setting” I was driving a 100mph airlink train from Leighton to terminal 3 and when I Hampton Hargate station, my train despawns
That also happened to me. It was very laggy and the rails were set to a depot and it didn't changed until I drove onto it. The rails weren't set right
I believe there's also one for being an AFK dispatcher
Yeah, despawned due to idling
yes there is
But it’s a yellow message
being afk gives a roblox message "being idle for 20 minutes" and you will have to leave and reconnect
another one is train initiasion canceled due to unhandeled error
ok
There’s also “Brake release acceptance timeout”, basically you SPAD or not reset AWS and when it says release brake don’t release it and hey presto, you get despawned
Cool
nice
I will be making a part 1 tommorow
I tried it
drive pass James street and you will receive an red message
That just was
@A Car oh ye
@A Car then ima not tell something
@A Car anyway I'm MaksKoro27 know me in Qd training?
@A Car oh dot someone helped me in traoning
ugly old trains and stations
also old announcements lol
I have more subs then you but your videos are higher quality
Not any more
OnTheRightTrack lol yeah
very outdated