BMW F82 ///M4 - Track Build - JQ Werks + Renown Steering Wheel Install (No Airbag Warning!)

Поділитися
Вставка
  • Опубліковано 18 гру 2024

КОМЕНТАРІ • 16

  • @killmodeco.6505
    @killmodeco.6505 Рік тому +1

    Just came across your channel while doing some steering wheel perusing... still stuck between the KMP solution and the JQ werks. We are on the same journey right now as I am converting my F82 M4 into a track car. Coincidentally we both have Sanomabeige Merino interiors, though I am taking the seats out to put my Recaros in. Currently restoring the carbon roof (what a joy...), and plan to upload a video of that... maybe I should make some videos installing the rest of my mods sitting in the garage.
    Thanks for posting this video, it really helps me understand the JQ Werks system, which I am leaning towards over the KMP right now. My only hesitation is the QR hub, which is a potential point of failure as the contacts and QR components begin to wear. Still, I really like that I have a choice of steering wheel with the JQ system. I'm subscribing and staying tuned!

    • @09_motorsports
      @09_motorsports  Рік тому

      Thank you, and I hope you enjoy your build as well! You cannot go wrong with either wheel, KMP or JQWerks. I was also hesitant about the QR hub, but once I received it and saw how it is improbable to attach the wheel in such as way as to mess up the pins, it made me feel better. Wear of the pins could be an issue if you pull the wheel on and off a lot, but I'm less concerned about that because I don't plan on taking mine off everytime I get in and out of the car. With the smaller wheel diameter (and if you have a flat bottom wheel), there is plenty of room to get in and out for me even with my OMP bucket seats.

  • @fastmacm3668
    @fastmacm3668 Рік тому +1

    Can you use the cruise control buttons to look at ethanol content still? And change maps?

    • @09_motorsports
      @09_motorsports  Рік тому

      I don't have ethanol or multiple maps, however, the buttons should perform just like the OEM buttons, so if you can do it on the OEM wheel, you should be able to do it on the JQWerks wheel as well. You may reach out to them to verify.

  • @thomasnguyen5627
    @thomasnguyen5627 Рік тому +1

    When is the Free to use tutorial coming? (:

    • @09_motorsports
      @09_motorsports  Рік тому

      Great question, and you have good timing! It will be out this weekend. Sorry for the delay!

  • @JQWerks
    @JQWerks Рік тому +1

    Sick

  • @numvienthongsuk4684
    @numvienthongsuk4684 10 місяців тому

    Where did you purchased the 330mm wheel?

    • @09_motorsports
      @09_motorsports  10 місяців тому +2

      The wheel I have in the video is from Renown. It is the Clubsport Motorsport wheel in alcantara. Be aware that the 130R wheel from Renown won't fit the JQ Werks hub, the undercut on the center part of the wheel won't clear the button surrounds on the JQ Werks main hub.

    • @numvienthongsuk4684
      @numvienthongsuk4684 10 місяців тому

      @@09_motorsports wonder will this fit Zestek?

    • @09_motorsports
      @09_motorsports  9 місяців тому +1

      @@numvienthongsuk4684 I have not personally installed a Zestek hub or had a chance to see one in person, but looking at pictures online and comparing the button locations between the Zestek and the JQ Werks, the locations are very similar and I would feel confident that a steering wheel that fits the JQ Werks would also fit the Zestek. Likewise, if a steering wheel did not fit the JQ Werks (like the 130R wheel), then I doubt it would fit the Zestek either. But again, this is just based on comparing the pictures online.

    • @numvienthongsuk4684
      @numvienthongsuk4684 9 місяців тому

      Thank you for the info. I bought the OMP Superleggero wheel but I’m thinking about buying the Renown Champion Motorsport Leather Horn Pad Steering Wheel. Your thoughts on this Renown wheel?

    • @09_motorsports
      @09_motorsports  9 місяців тому +1

      I have my concerns that the Champion wheel with the leather horn pad will not fit the JQ Werks or Zestek. The added bulk from the horn pad would likely interfere with the buttons on the steering hub. It would be a tight fit and it may possibly work, but I have my doubts.

  • @FieldWordsworth-m5n
    @FieldWordsworth-m5n 2 місяці тому

    Wilson Amy Clark Eric Lopez Sarah