RIDGID One Stop Plumbing Wrench Review!
Вставка
- Опубліковано 30 бер 2020
- RIDGID One Stop Plumbing Wrench Review! This RIDGID tool will help install and remove compression style water shutoff valves (Anglestops) with ease from copper pipes. Join me for a review and demo. Tool listed below. Subscribe here :ua-cam.com/users/ThatFixItGu...
Ridgid one stop tool link: amzn.to/3dJ3MZy
(Amazon Affiliate link)
Did Our Video Help you? Please Consider Helping Out the Channel
www.paypal.com/donate/?cmd=_s...
Check us out on Facebook: / ufix247
We love helping people and hope that we are doing that!
Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license
(creativecommons.org/licenses/...)
Artist: audionautix.com/ - Розваги
I have found that you need to leave the compression nut on where the supply line goes when you use the wrench going in that hole. If you don't, you could make the threads oblong, the nut prevents that from happening. I learned the hard way.
That is great advise. Thank you for mentioning this! You usually only do that once!
Excellent review!
I just bought this tonight from Home Depot($26) because it looked really interesting. However I wasn’t sure if I was going to keep it or bring it back to the store but after this review I’m keeping it. I’m working at a hotel renovation and we have about 500 of these to switch out. So this should come in handy.
That is a lot of angle stops! You are going to love this tool! May be your best friend when it’s all said and done!
Very helpful and informative video! Bring us more !
Will do! Thank you for watching!
Thanks for the tips Brian!
Your welcome! Glad you found this useful.
Wow that’s a great tool to have thanks for the info Brian 👍
Your welcome Britt! Thanks for watching!
Thanks for sharing! Something to keep in the back of the toolbox.
Yep! Nice to have when needed! thanks for watching!
Thanks. May need to use this someday!
your welcome!
Very nice. Now applying this technique
Sweet. You will like this tool.
Another great tool is the ridged multi tool. For faucets lines and installing the faucet and drain strainers. Use that tool constantly. Actually just bought the newer version and happy I bought it.
I like the ridgid multi tool as well. I wish I had the newer version.
It also is a perfect tool for putting on shower necks and shower heads! Not shown in the video but the end of big wrench fits inside the shower neck for more extension when tightening it on and fits shower heads as well. All around great plumber tool!
Thanks!
Yet, another GREAT TOOL by RIGID!
They do make good tools.
Very interesting wrench!
It is a really useful wrench in the plumbing world. Thanks for watching!
The 9/16” is for 3/8” nuts. Use lots of those in plumbing.
For sure! Thank you and we appreciate the watch
You just saved me $20!!
Awesome. I’m glad to hear that! Hope we can help again!
Yes use the nut before sticking tool in to hold valve. I found out the hard way. Round became oval.
Great call! Great you use this. I like this tool as well.
Very well presented video, but I am not sure I see the need for a specialist tool for this? Surely you just use a normal wrench to tighten the nut while holding the body of the valve with a set of smallish channel locks, two tools that every plumber should have any way???
You are right. A plumber will have all the wrenches to do angle stops without this tool. Just a specialty tool by ridgid I wanted to show. It is a little more compact than two wrenches. Thank you for watching!
😉👍👌
Thank you!
awesome content keep up the amazing content ,would like to be friends
Thank you. I would like to be friends.
Does it work for stops with a half inch outlet?
No it does not you will need to use an adjustable jaw wrench or an open wrench with it for those odd sizes. Great question. Thanks for watching.
got one more than ten years ago. it works as it should and comes in very handy when needed. tool finish is quite poor for the price and the two wrenches don't align when screwed together making it ratly when you lay it flat, at least for the made in PRC one i have, the previous Slovenia-made ones had a better finish. still recommend it though. 🔧😽👌
SORRY BUT THERES NUTTEN SPECIAL ABOUT THAT WRENCH! What Normal tools cant do! I was waiting for the PUNCH LINE but it never came!
Oh man. Sorry this tool did not live up to the hype. For a service or finish plumber this is a very handy tool.
Why are you pretending that the backup wrench screws out? You mentioned that it does and also pantomimed unscrewing it, in reality it's in there fairly loosely and just slides out.
Thanks for the tips Brian!
Your welcome!