Thanks so much. I followed the guide. It works for me. For those who has issues with the boot loader not show up when pressing the spacebar, you need to add 'timeout 10' without quotes to /boot/efi/loader/loader.conf then reboot to change the timeout manually.
It important to note several things not mentioned in the video - Your storage devices have to be in AHCI mode otherwise the partitions will not appear in Pop OS. My Dell XPS 15 came with 2 SSDs configured in RAID. You have to disable hard disk encryption (if encrypted), enable safe mode on Windows 11, restart and go to boot menu and change RAID to AHCI. Restart and go back into Windows, remove safe mode and re-encrypt your hard disk (if encrypted) - Some machines, to get the boot menu, you have to press F8 (Dell XPS for example) instead of space bar. Then you can press 't' multiple times to increase the boot menu delay.
I have been having this problem, and finding the answer has been rough. I knew that I needed my storage to be AHCI, but I didn’t know quite how to get there and this helps a lot. Thanks for this comment!!
If you get a error on Balena such as Error: (0 , h.requestMetadata) is not a function here is how to fix it: close balena and run it as administrator. This will fix the issue. Thanks for the amazing video!
It doesn't work for me. I do have Microsoft folder copied to the /boot/efi/EFI folder . It just starts with pop os directly. I also went to bios and moved the 'windows boot manager' (There were 2) up and lowered pop os but that opens just windows. EDIT: Found the solution. Keep pressing T to increase the boot manager time. Perhaps it was too fast for me to notice previously. Also...my one has two POP_OS....one says something like current.kern and other one says old.kern. I did have pop os before but deleted that installed a new one due to space reasons.
I have completed all the required steps and everything went smoothly on the Pop!_OS terminal. However, even though I changed the boot priority in the BIOS, Windows 11 always starts up when I turn on my computer. To access Pop!_OS, I have to press F11 during startup. What could be missing?
9:57 I don't see any entries of other operating systems here. Is it because I chose a different disk for creating unallocated space instead of the one which has my Windows OS on it?
Great tutorial, I installed Pop Os on my Omen 15 ce. Now I have w10 on a nvme ssd and Pop Os on a normal ssd. However, I couldn't enable dual booting as shown in the video, I followed every step and typed the commands as instructed and every time I reset my PC Pop Os boots normally, I have to boot w10 from the BIOS options. Could someone tell me if there was a difference if both systems were installed on different ssds?
Is it a good idea to dual boot pop os 22.04 LTS and windows 11 without adding the windows boot menu to system d boot? I asked this question because each of the time during an update (especially firmware update, bios update) the system needs to restart, and during the restart the system goes into bootloader ,and most of the time the update remains incomplete. So by not adding the windows boot entry on system d boot, anytime i restart from pop os i land up in pop os , and restart from windows lands in windows and the update will be completed. The only con is that i will need to press the F12 keyto go to temporary boot each time i switch on the laptop, or it will boot according to priority. Is that right, or is there any disadvantages of doing so? Please help
Thanks for the detailed guide, however are there anyway to prioritize booting to windows 11 first before pop os ? i just want pop os to be my 2nd operating system
Ok I know the issue. First turn off the PC> Turn it on back. While it's turning on head over to UEFI boot menu. Choose Windows Boot Manager to boot into windows and try again. This time 100% it has to work.
I don;t often comment on youtube videos but this made things super easy. I often boot from USB to use my linux system but it's super handy dualbooting without issues. Systemd is great
I am completely new to Linux. Hopefully you might be able to answer my question if you dont mind At the beginning of your video you are talking about systemd-boot, but as far as I know PopOS 22.04 is coming with Grub or I am mistaken? At least I found this information on several sites. But the main question or problem is that I am owning 2 PCIE SSDs, on the first W10 is installed and I would like to install Pop OS from USB-stick on the second SSD, completely independent from W10. Is it possible during Pop OS installation to choose on which SSD the installation and more important the Bootloader is installed to? If not would it help to unplug the windows ssd temporarily for the Pop OS installation and plug it in afterwards? Last question, when using W10 or W11 I need secure boot, so do I have to reactivate it everytime I want to boot into Windows instead of Pop OS? Thank you very much :)
1) First Off, POP OS uses System D Bootloader. You can install grub after the installation. 2) POP OS doesn't not support *secure boot*, you must disable it. Otherwise rely on Ubuntu and Fedora. 3) Yes you can easily use Second PCIE based SSD to install pop os (Standalone ). the procedure is same creating bootable USB and All. But, During the installation, you will see an option called *ERASE DISK or CLEAN Install* select that and choose your secondary SSD. Don't worry it doesn't harm your windows 11 or 10 on first SSD.
When I tried to delete the boot file it shows me a virtual disk error as follows: Virtual Disk Service error: Delete is not allowed on the current boot, system, pagefile, crashdump or hibernation volume. Really appreciate if you could give me a workaround for this
@@randombutpro7547 i found it. The answer was right there. It says "current boot system" all i had to do was boot with the original windows boot loader.
This was an amazing tutorial. Thank you for making it simply easy to follow for non techie Linux users 😅 I'll get there eventually but again thanks 👍👍👍
Hello, when I switch to Windows I get this error. File: \Windows\system32\winload.efi Error code: 0xc000000e This only happens the first time after (re)booting. I am using two seperate drives and I tried to follow the tutorial multiple times but it's still giving me the same error. Does anyone know how to fix this?
Something's wrong in my end, I'm using Acer aspire e5-475g and don't know which key is to get the boot menu, when I tried the UEFI boot menu it shows 2 entry for only 1 boot service and that is windows boot manager
please i need help ASAP when deleting the 1000MB parition i got an error "Virtual Disk Service error: Delete is not allowed on the current boot, system, pagefile, crashdump or hibernation volume." NEED HELP ASAP
I guess you tried to delete the Main Windows EFI partition. Make sure you have selected the proper POP OS EFI Partition. if the same thing happens again. Shutdown Windows 11 and turn it on, while its powered on, head over to UEFI boot menu and choose windows boot manager to boot into windows 11. Then try again.
I have done all the instructions as shown in the video. But I still boot Windows at the start, as before, and there is no choice of OS. I also have three Windows Boot Managers in the Boot Menu, maybe that's the problem. Please tell me how it can be fixed?
It worked well, but after some days the pop OS disappeared from boot manager, it is the first one in bios boot options, i can't find a way to fix this and enter pop OS
I'd like to ask. How do I adjust the fan? I'm using POP OS and Zorin OS but it's the same fan won't adjust. I am confused how to solve this problem. The laptop I use is Acer Nitro 5 (AN515-56). Thank You.
When I tried to remove the partition as shown in the last section I get this error: Virtual Disk Service error: Delete is not allowed on the current boot, system, pagefile, crashdump or hibernation volume. How can I remove it?
Hi, that was a easy guide for beginner, i have one question though what if i kept my windows in c drive and installed popos in d drive ? how can i add WinBM to boot menu from terminal.....
good guide. still, my win10 started to fix C disk after installation. pop os worked normally, also added os-prober stuff but it doesn't work. is this fixing of c disk is ok? or it'll erase also linux data?
On my Lenovo laptop, one problem I was facing was not being able to set the partitions on the installer using Gparted. Initially I thought this was an Intel RST problem, and tried to switch it to AHCI multiple times using the safe mode but it would always turn back to RST after a restart. I then looked into Intel Optane, and after disabling it, I was able to download Pop OS without any issues (RST still enabled). Hope this helps anyone
it's really great video thank you 💘.but i am facing some issue's with my wifi (disbaled the fast boot) and sometimes my laptop freeze's can you help me with that if possible ?
Hello, I found your video very informative. Could you please create a tutorial on how to dual boot Parrot OS with a dedicated boot partition? Additionally, it would be helpful if you could include steps on how to safely remove this setup in the end. Thank you.
I followed this tutorial and have been using without any issues for the last few months. But today suddenly my laptop froze while using it normally. So I shut it down. But after that it was not booting at all. After a couple more tries, it booted but showed some issues with boot manager. Not sure what it was. Then I restarted again and jumped straight into windows. What's the issue? I did install the boot manager showed here. Was it something with that?
Would this method work for the OS being on seperate NVME drives? I figure I can just copy the same Boot Mgr using the instructions given, but wasn't sure if it'd matter if they were separate drives.
I've found this among many other videos about this but all of them seem to be using one drive and not using a second drive like in my situation. Is the process about the same? I'm new to linux so I would hate to break something.
Great Video! But my grub menu is not showing. I can change the priority of my os from BIOS but cannot see the option to select OS. I have to got to the BIOS menu everytime to change OS. I want to enable GRUB menu that shows the option to select the OS. Can anyone help?
Remember to press the space bar several times while turning on your computer, that way you get the GRUB menu and then you can follow 8:16 steps to see this menu every time.
Windows cant shut down properly. When i try to shut it down or reload it becomes stuck on shutting down screen with infinite looping animation until i hold power button. Pop OS doesnt have this issue, and everything else works fine. Please help!
Disable Fast Startup Fast Startup can sometimes cause issues with the shutdown process. To disable Fast Startup: Go to Control Panel > Power Options. Click on Choose what the power buttons do. Click on Change settings that are currently unavailable. Uncheck Turn on fast startup (recommended) and click Save changes.
okay buddy, I'm facing two problems first one popos is automatically selected as secondary os, so it doesn't boot into popos instead it boots into windows (so i used boot key to enter into pop os). Second one is big one, When I try to go into bios it shows black screen with one underscore. any help will be great.
when i go to: delete partition override, the prompt shows me this: The command or parameters specified in this system are not supported. (i translated from portuguese). can you help me pleeeeaaaasss
I have installed pop os as instructed in the video. But when I load to OS I get flickering on my laptop screen whenever I move my cursor. Can anyone help me fix this.
I need help. I try to run sudo cp -ax /mnt/EFI/Microsoft and it gives me an error of cp: missing destination file operand after '/mnt/EFI/microsoft' Any help would be appreciated!!
Hello, I am having a problem. I want to delete pop os, I followed your instructions but I came up with this error "Virtual Disk Service error: Delete is not allowed on the current boot, system, pagefile, crashdump or hibernation volume." How can I fix this? Please help me. Thank you
how can I add the 3rd OS? Got Windows & Pop and want to add also Kali for school but I don't want to delete Windows for Games ^^ thanks for your Guide and happy holidays (:
I have done a pop os and windows dual boot from this and your previous tutorial. After some time they both resulted in me not being able to boot to pop os. Computer always boots into windows with no option to select before booting. How to fix it?
Your tutorial is phenomenal. Calm, perfectly paced, exact information needed with no fluff. Thank you, and well done!
Thank you so much
@@AndroidOreo1234 It does detect a difference on your system, and that is obvious. Does it let you set it up by your email?
Thanks so much. I followed the guide. It works for me. For those who has issues with the boot loader not show up when pressing the spacebar, you need to add 'timeout 10' without quotes to /boot/efi/loader/loader.conf then reboot to change the timeout manually.
Worked perfect, this is the simplest way to dual boot. Thanks so much !
this tutorial works perfectly as of dec 2023, really good video. well done and easy to follow
which laptop?
lenovo legion AMD r7 @@samriddhi6129
It important to note several things not mentioned in the video
- Your storage devices have to be in AHCI mode otherwise the partitions will not appear in Pop OS. My Dell XPS 15 came with 2 SSDs configured in RAID. You have to disable hard disk encryption (if encrypted), enable safe mode on Windows 11, restart and go to boot menu and change RAID to AHCI. Restart and go back into Windows, remove safe mode and re-encrypt your hard disk (if encrypted)
- Some machines, to get the boot menu, you have to press F8 (Dell XPS for example) instead of space bar. Then you can press 't' multiple times to increase the boot menu delay.
I have been having this problem, and finding the answer has been rough. I knew that I needed my storage to be AHCI, but I didn’t know quite how to get there and this helps a lot. Thanks for this comment!!
Also if you have an NVME drive, you don't need to worry about putting it in AHCI mode as this applies to SATA drives only.
@@PortlandMan Thanks man.
If you get a error on Balena such as Error: (0 , h.requestMetadata) is not a function here is how to fix it: close balena and run it as administrator. This will fix the issue. Thanks for the amazing video!
Thanks for the info!
I can see my drive to select the partition shown at 5:49 , however my drive shows up in modify partition.
The best dual boot pop os Windows tutorial I found on the web, thk u so much
Thank you so much.
It doesn't work for me. I do have Microsoft folder copied to the /boot/efi/EFI folder . It just starts with pop os directly. I also went to bios and moved the 'windows boot manager' (There were 2) up and lowered pop os but that opens just windows.
EDIT: Found the solution. Keep pressing T to increase the boot manager time. Perhaps it was too fast for me to notice previously. Also...my one has two POP_OS....one says something like current.kern and other one says old.kern. I did have pop os before but deleted that installed a new one due to space reasons.
Good to hear that.
found a solution how to temove old kernel thing? and just have 1 entry of pop os?
@@chocoblin5887 i don't use linux anymore unfortunately
Fantastic! I want to try gaming on Linux and this is a great way to keep my windows OS ready to go!
Thank you so much for the video ! Tomorrow I will try on my surface :)
Best of luck!
Appreciate the thorough tutorial from install to delete!
Pop a good distro. But ksk what's your favourite distro?
most underrated video... smooth no missinformation...tnx❤
Absolutely phenomenal video!!!!
Thank you so much for this, it was clear and very well described and it worked perfectly!!!
The boot step didn't work for me. It only worked used grub customizer
Grub is bullshit
Love it. No more other 3rd party programms needed.
Tried it just yet and it worked like a charme
it's very good. Thank you. Could you also explain how to set a default os, so you don't have to select Popos every time you start up?
grub customizer
I have completed all the required steps and everything went smoothly on the Pop!_OS terminal. However, even though I changed the boot priority in the BIOS, Windows 11 always starts up when I turn on my computer. To access Pop!_OS, I have to press F11 during startup. What could be missing?
Do you have hp laptop
Maybe its secure boot? When i turned it back on it refused to launch into pop os and just launched into windows 11 so i just turned it off
9:57 I don't see any entries of other operating systems here.
Is it because I chose a different disk for creating unallocated space instead of the one which has my Windows OS on it?
Great tutorial, I installed Pop Os on my Omen 15 ce. Now I have w10 on a nvme ssd and Pop Os on a normal ssd. However, I couldn't enable dual booting as shown in the video, I followed every step and typed the commands as instructed and every time I reset my PC Pop Os boots normally, I have to boot w10 from the BIOS options. Could someone tell me if there was a difference if both systems were installed on different ssds?
Is it a good idea to dual boot pop os 22.04 LTS and windows 11 without adding the windows boot menu to system d boot?
I asked this question because each of the time during an update (especially firmware update, bios update) the system needs to restart, and during the restart the system goes into bootloader ,and most of the time the update remains incomplete. So by not adding the windows boot entry on system d boot, anytime i restart from pop os i land up in pop os , and restart from windows lands in windows and the update will be completed. The only con is that i will need to press the F12 keyto go to temporary boot each time i switch on the laptop, or it will boot according to priority.
Is that right, or is there any disadvantages of doing so?
Please help
Thanks for the detailed guide, however are there anyway to prioritize booting to windows 11 first before pop os ? i just want pop os to be my 2nd operating system
did you find out?
@@johanrecaman yea just stop using Linux
@@leeminh2401lol
Yes you can lol press d in the boot menu 😂@@leeminh2401
Would disabling the secure boot have any negative impact on the Windows 11 installation? Microsoft recommends to keep secure boot enabled.
No worries.
13:46 when i try to delete the efi partition, it says "delete not allowed on the current boot, system, pagefile, crashdump or hibernation volume"
Ok I know the issue. First turn off the PC> Turn it on back. While it's turning on head over to UEFI boot menu. Choose Windows Boot Manager to boot into windows and try again. This time 100% it has to work.
I don;t often comment on youtube videos but this made things super easy. I often boot from USB to use my linux system but it's super handy dualbooting without issues. Systemd is great
Thank you som much ..
Awesome to the point video! Great job mate!
I am completely new to Linux. Hopefully you might be able to answer my question if you dont mind
At the beginning of your video you are talking about systemd-boot, but as far as I know PopOS 22.04 is coming with Grub or I am mistaken? At least I found this information on several sites.
But the main question or problem is that I am owning 2 PCIE SSDs, on the first W10 is installed and I would like to install Pop OS from USB-stick on the second SSD, completely independent from W10. Is it possible during Pop OS installation to choose on which SSD the installation and more important the Bootloader is installed to? If not would it help to unplug the windows ssd temporarily for the Pop OS installation and plug it in afterwards?
Last question, when using W10 or W11 I need secure boot, so do I have to reactivate it everytime I want to boot into Windows instead of Pop OS?
Thank you very much :)
1) First Off, POP OS uses System D Bootloader. You can install grub after the installation.
2) POP OS doesn't not support *secure boot*, you must disable it. Otherwise rely on Ubuntu and Fedora.
3) Yes you can easily use Second PCIE based SSD to install pop os (Standalone ). the procedure is same creating bootable USB and All. But, During the installation, you will see an option called *ERASE DISK or CLEAN Install* select that and choose your secondary SSD. Don't worry it doesn't harm your windows 11 or 10 on first SSD.
Delete is not allowed on the current boot, system, pagefile,
crashdump or hibernation volume.
while deleting boot for pop os , how to fix?
turn off the PC. While turning On, head over to UEFI boot menu and boot into windows from there. Then try again deleting it should work 100%
@@kskroyaltech I already did that but I found a tutorial for the issue and it fixed it
When I tried to delete the boot file it shows me a virtual disk error as follows:
Virtual Disk Service error:
Delete is not allowed on the current boot, system, pagefile,
crashdump or hibernation volume.
Really appreciate if you could give me a workaround for this
did u find any solution for it?
@@NeerajKumarDelhiWalla Nope.
@@randombutpro7547 i found it. The answer was right there. It says "current boot system" all i had to do was boot with the original windows boot loader.
@@NeerajKumarDelhiWalla I don't think you get my question
were you successful in deleting your linux boot file?
Oh my! This is the best tutorial on how to install PopOS! Thank you!
Awesome
Why there are two partitions in bios: USB FLASH DRIVE PMAP and usb flash drive pmap partition 2. Which one should I boot?
Thanks for the tutorial. Followed the exact steps and got my Windows + PopOS dual boot ready.....
You're welcome!
Thank you so much for this video! I learned something I've been trying to figure out a long time.
This was an amazing tutorial. Thank you for making it simply easy to follow for non techie Linux users 😅 I'll get there eventually but again thanks 👍👍👍
My pleasure.
Hello, when I switch to Windows I get this error.
File: \Windows\system32\winload.efi
Error code: 0xc000000e
This only happens the first time after (re)booting. I am using two seperate drives and I tried to follow the tutorial multiple times but it's still giving me the same error. Does anyone know how to fix this?
06:22 shouldn't the boot partition be ext4 file system as well?
NO, Boot Partition / EFI can be formatted with FAT32 file system
@@kskroyaltechit doesnt let me
@KskRoyal Windows 11 requires Secure Boot to be enabled. Why did you disabled it?
Otherwise POP OS won't run. Do one thing, when you are working with Pop OS disable secure boot and enable when working with windows 11.
Something's wrong in my end, I'm using Acer aspire e5-475g and don't know which key is to get the boot menu, when I tried the UEFI boot menu it shows 2 entry for only 1 boot service and that is windows boot manager
Nice tutorial! It worked like a charm!!
Thank you so much
Thank you so much. Great video, very well paced.
This is neatest tutorial I've watched. Thanks
please i need help ASAP when deleting the 1000MB parition i got an error "Virtual Disk Service error:
Delete is not allowed on the current boot, system, pagefile,
crashdump or hibernation volume." NEED HELP ASAP
I guess you tried to delete the Main Windows EFI partition. Make sure you have selected the proper POP OS EFI Partition.
if the same thing happens again. Shutdown Windows 11 and turn it on, while its powered on, head over to UEFI boot menu and choose windows boot manager to boot into windows 11. Then try again.
I have done all the instructions as shown in the video. But I still boot Windows at the start, as before, and there is no choice of OS. I also have three Windows Boot Managers in the Boot Menu, maybe that's the problem. Please tell me how it can be fixed?
I have one SSD drive, and also one Windows 11 instance installed.
Thank you this one actually worked
It worked well, but after some days the pop OS disappeared from boot manager, it is the first one in bios boot options, i can't find a way to fix this and enter pop OS
what to do to revert the step from 9:36 ?
hey man, i just want to thanks you because you help me with this tutorial, 🙏🏼🙏🏼
How would it be done when the OS are on different disks.
Try this one ua-cam.com/video/NGWlphXSZm4/v-deo.html.
Same thing i was gonna ask
I'd like to ask. How do I adjust the fan? I'm using POP OS and Zorin OS but it's the same fan won't adjust. I am confused how to solve this problem. The laptop I use is Acer Nitro 5 (AN515-56). Thank You.
yo i just watched your vid on how to dual boot kali linux from 2 years ago and its amazing i just subscribed to your channel
Thank you so much ..
When I tried to remove the partition as shown in the last section I get this error: Virtual Disk Service error: Delete is not allowed on the current boot, system, pagefile, crashdump or hibernation volume. How can I remove it?
Hi, that was a easy guide for beginner, i have one question though what if i kept my windows in c drive and installed popos in d drive ? how can i add WinBM to boot menu from terminal.....
You can copy the contents of Windows Boot Manager to the Pop OS EFI directory .. I did show that part at the end of the video.
worked like a charm... thank you :)
You're welcome!
The best tutorial I’ve ever seen. Thank you
Wow, thanks!
Worked like a charm, thanks.
good guide.
still, my win10 started to fix C disk after installation. pop os worked normally, also added os-prober stuff but it doesn't work. is this fixing of c disk is ok? or it'll erase also linux data?
On my Lenovo laptop, one problem I was facing was not being able to set the partitions on the installer using Gparted. Initially I thought this was an Intel RST problem, and tried to switch it to AHCI multiple times using the safe mode but it would always turn back to RST after a restart. I then looked into Intel Optane, and after disabling it, I was able to download Pop OS without any issues (RST still enabled). Hope this helps anyone
Do you mean I have to connect wifi before installing pop os? 5:02
It's not mandatory. But if you connect to WIFI or Ethernet cable for Internet connection pop os will try to download the latest updates.
it's really great video thank you 💘.but i am facing some issue's with my wifi (disbaled the fast boot) and sometimes my laptop freeze's can you help me with that if possible ?
For the dual boot in my case everything was done the same way and it didn't work.. I can't figure out why
Hello, I found your video very informative. Could you please create a tutorial on how to dual boot Parrot OS with a dedicated boot partition? Additionally, it would be helpful if you could include steps on how to safely remove this setup in the end. Thank you.
Thank you it works beautifully
Thank you for the tutorial ❤
I followed this tutorial and have been using without any issues for the last few months. But today suddenly my laptop froze while using it normally. So I shut it down. But after that it was not booting at all. After a couple more tries, it booted but showed some issues with boot manager. Not sure what it was. Then I restarted again and jumped straight into windows. What's the issue?
I did install the boot manager showed here. Was it something with that?
Did u try other distros and have you ever face the same issue ?
When i load the os from the usb stick, it loads and only gets to the background.. nothing else, any reason why?
Genius, that solved the issue ive got, thanks alot
Would this method work for the OS being on seperate NVME drives? I figure I can just copy the same Boot Mgr using the instructions given, but wasn't sure if it'd matter if they were separate drives.
You can install Pop OS on a separate NVME Drive no issues.
One year later...does this method still work 100%?
Sure why not. It works give a try
I've found this among many other videos about this but all of them seem to be using one drive and not using a second drive like in my situation. Is the process about the same? I'm new to linux so I would hate to break something.
Worked like a charm. Wonder how the installation doesn't include an entry for windows by default, as it has been done for ages with grub.
Yes. Thats strange ..
This was a great tutorial. Thanks
Great Video! But my grub menu is not showing. I can change the priority of my os from BIOS but cannot see the option to select OS. I have to got to the BIOS menu everytime to change OS. I want to enable GRUB menu that shows the option to select the OS. Can anyone help?
Remember to press the space bar several times while turning on your computer, that way you get the GRUB menu and then you can follow 8:16 steps to see this menu every time.
Windows cant shut down properly. When i try to shut it down or reload it becomes stuck on shutting down screen with infinite looping animation until i hold power button. Pop OS doesnt have this issue, and everything else works fine. Please help!
Disable Fast Startup
Fast Startup can sometimes cause issues with the shutdown process.
To disable Fast Startup:
Go to Control Panel > Power Options.
Click on Choose what the power buttons do.
Click on Change settings that are currently unavailable.
Uncheck Turn on fast startup (recommended) and click Save changes.
i got it to work but like it uses just as much resources as my decluttered windows installation. whats the point of this?
Amazing tutorial, thanks for sharing your knowledge!
Thank you so much, your tutorial is really good
Will ubuntu work on asus zenbook 14 oled or hp spectre X 360? Please answer and if there are better laptops please suggest i need one.
macbook pro m2
you Sir are a HERO! Thank you for the video!
You're welcome!
A perfect instructional video👍
okay buddy, I'm facing two problems first one popos is automatically selected as secondary os, so it doesn't boot into popos instead it boots into windows (so i used boot key to enter into pop os). Second one is big one, When I try to go into bios it shows black screen with one underscore.
any help will be great.
Same problem. Any fixes?
No, I removed the dual boot and using windows only 😅
I followed the instructions but windows option not showing..
It boots pop by default
I need to go into boot manger and boot windows 😢
I love all your installation videos. Can you please make a video with ParrotOS/Win11
Will try
Thank you so much!! This saved me!
You're welcome!
And how can I configure the boot manager to boot Windows by default instead of Pop Os?
You can leave as it is.
Excellent one 🎉❤
I run into hardware issue and the installation fails. Anyone else in the same boat?
Can you elaborate ?
@@kskroyaltech Installing Pop!_OS failed, possibly due to a hardware error when trying to install from Live USB
when i go to: delete partition override, the prompt shows me this: The command or parameters specified in this system are not supported. (i translated from portuguese). can you help me pleeeeaaaasss
make sure you have selected the exact partition that is needed to delete.
Thanks for your tutorial, very helpful
You are welcome!
Bro i am having a problem with the partition its not showing the one from ihave done from the windows (solution )
I have installed pop os as instructed in the video. But when I load to OS I get flickering on my laptop screen whenever I move my cursor. Can anyone help me fix this.
Try to install GPU drivers ..
use this command:
*_sudo ubuntu-drivers autoinstall_*
I need help. I try to run sudo cp -ax /mnt/EFI/Microsoft and it gives me an error of cp: missing destination file operand after '/mnt/EFI/microsoft' Any help would be appreciated!!
thats the command:
*sudo cp -ax /mnt/EFI/Microsoft /boot/efi/EFI*
Hello, I am having a problem. I want to delete pop os, I followed your instructions but I came up with this error
"Virtual Disk Service error:
Delete is not allowed on the current boot, system, pagefile,
crashdump or hibernation volume."
How can I fix this? Please help me. Thank you
same
How will be performance of pop OS if I install it on HDD? (for basic tasks, mostly heavy internet browsing and watching movies)
Not BAD. Use preload tool to speed up launching of apps.
sudo apt install preload
@@kskroyaltech Awesome, thanks.
nice. I try it dual boot with windows 10. and it works too
It works.
how can I add the 3rd OS? Got Windows & Pop and want to add also Kali for school but I don't want to delete Windows for Games ^^
thanks for your Guide and happy holidays (:
Watch this video: ua-cam.com/video/j9THuUbom5U/v-deo.html
in the bootloader screen doesn't appear PopOS only Windows
Good video, just one question: what if a have pop os installed and want to dual boot win 11?
Why not it works.
So, you have to disable Secure Boot in order to run Pop!_OS?
If I don't disable pop os is not booting for me. Read more about it : support.system76.com/articles/install-pop/
I have done a pop os and windows dual boot from this and your previous tutorial. After some time they both resulted in me not being able to boot to pop os. Computer always boots into windows with no option to select before booting. How to fix it?
Are you able to boot pop OS from UEFI boot Menu ?
@@kskroyaltech I'm not :(
It's like it never existed