Excellent, thank you Peter. Very thorough , though I did expect the scroll ring to get a stiff brush out ,or scrape round. Now, I bought my Nova G3 chuck from Record Power in 2005, retailed by Machine Mart. Would the procedure, and particularly the circlip be exactly the same, please? I have never dismantled the scroll. Bernard.
Should be much the same, but mark and take a picture to be sure, on the circlips not sure, but our service team will be able to sort if needed, take care taking it out and should be ok. Regards Pete
Hello, thank you for your comment. The current variation of the DML305 lathe are all M33 x 3.5 thread, which is directly compatible with the SC3 Geared Scroll Chuck. However, we have previously produced a 3/4 x 16 thread version. Please can you confirm which thread size your machine is? If your machine is the 3/4 x 16 thread, you would require the 62128 Thread Adaptor 3/4" x 16 TPI UNF RH - which can be found here: www.recordpower.co.uk/category/chuck-inserts. If you should require additional support, please contact our sales team on 01246 571 020 or email sales@recordpower.co.uk. Best Wishes, Record Power.
Hello, thank you for your comment. For additional support, please contact our experts on 01246 571 020 or email technical@recordpower.co.uk. Best Wishes, Record Power.
What mm are your circlip pliers for taking off the circlip?
Just bought 2nd hand SC3. Is the headstock thread size marked on chuck, as I understand it can be 3 options
Thanks Pete will you do the SC4 next?. Les.
Yes to come later this week. Regards Pete
Excellent, thank you Peter. Very thorough , though I did expect the scroll ring to get a stiff brush out ,or scrape round. Now, I bought my Nova G3 chuck from Record Power in 2005, retailed by Machine Mart. Would the procedure, and particularly the circlip be exactly the same, please? I have never dismantled the scroll. Bernard.
Should be much the same, but mark and take a picture to be sure, on the circlips not sure, but our service team will be able to sort if needed, take care taking it out and should be ok. Regards Pete
Hi Peter I have the record power dml305 do I need a scroll adapter to attach this chuck to my lathe?
Hello, thank you for your comment. The current variation of the DML305 lathe are all M33 x 3.5 thread, which is directly compatible with the SC3 Geared Scroll Chuck. However, we have previously produced a 3/4 x 16 thread version. Please can you confirm which thread size your machine is? If your machine is the 3/4 x 16 thread, you would require the 62128 Thread Adaptor 3/4" x 16 TPI UNF RH - which can be found here: www.recordpower.co.uk/category/chuck-inserts. If you should require additional support, please contact our sales team on 01246 571 020 or email sales@recordpower.co.uk. Best Wishes, Record Power.
totally skipped how to take off the plastic back. booooo
Hello, thank you for your comment. For additional support, please contact our experts on 01246 571 020 or email technical@recordpower.co.uk. Best Wishes, Record Power.