🔥 Hope you enjoyed the build? Subscribe to RcAdventurer for more builds here thanks - bit.ly/3dd4AY4subscribe 😉 Part 1 here if you missed it ua-cam.com/video/5tqYR3j5oiY/v-deo.html
Sure thing the front hood still uses the 2 body clips to secure the front end and the back end fits so well around the rear bed that's attached to the chassis it cant really move out of place but for other bodys sometimes a bit of strong velcro each side at the rear really helps secure it underneath if you want an invisible method. I only take it for slow crawls generally so its not jumping around like bashing type Rcs its even rolled a couple of times and stays all in place. Hope that helps thanks :)
Thanks very much yeah a bit different to the others as you see so many Trx4 defenders on the trails haha cheers for checking it out have a great weekend 👍👍
sure, tiny short screws and a spot of glue on them at 12.53 min in the vid you can just about see them sticking out in the rear inside on the video for some reason I forgot to show them being fitted oops!
Does the tailgate come with the bracket part to mount the tailgate door? all i can find is just the door but not the piece you are holding at 1:04. If not do you have a link to that part?
Yes you buy the rear bed and tailgate separately incase you don't one or the other I got it off there ebay shop www.ebay.co.uk/usr/noahsrcark1 cheers for checking it out 👍
Hi, No not at all this one had blue underneath so you wouldn't notice it if you had white under it may after a lot of use I don't bash my Rc's so its only light marks from going on forest trails mud etc and totally fine. I only painted the outside as the blue paint job was ruined so wanted to use the body instead of wasting it which is shown in part 1 of the build. Guess if your scraping up rocky areas scratching it lots might show more unless dark colour under the black 👍👍 l
Sure all the rear bed parts are sold on Ebay by seller noahsrcark1 very helpful and all arrived quicky and good quality, hope the build goes well thanks
I know this is going to make me look stupid so please forgive me, I see quite a few people putting those two wires that go from the bonnet to the roof on their RC cars, what are they for?
No probs always better to ask, they are called limb risers the wires on the bonnet and the deflect branches etc when off roading if you check real 4x4 off roaders they sometimes have them. I bought mine off ebay from china thanks for checking the vid out
I love those great suggestion dont people tend to like them stock and exact to the original not with loads of accessories and other bits, I tried to buy the Rc Discovery 3 also as I had one for real but they are not made and hard to get the body's for it seems Cheers for checking it out and watch out for the Dc1 build haha
Another great build, looking good. I dig the black rims. Are you going to flip the rear bumper mount upside down, or get another front mount to bring the rear bumper up closer. Or is there something keeping you from doing that. Love the build!
@@rcadventurer no the rear side windows fella the look like tactical fuel cans or something like that 🤷🏻♂️🙏🏻. Appreciate you taking the time to reply fella 🙏🏻👍🏻💯
@@gmann30 oh yeah sorry my mistake they are rotopax fuel cans from shapeways Knight Customs 3D printed parts from US they have lots of 3D printed stuff for TRX 4 and crawlers 👍👍👍👍👍
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
🔥 Hope you enjoyed the build? Subscribe to RcAdventurer for more builds here thanks - bit.ly/3dd4AY4subscribe 😉 Part 1 here if you missed it ua-cam.com/video/5tqYR3j5oiY/v-deo.html
That bass line at 14:37 earnt you a thumbs up. I like the black rims.
haha great cheers
hi could you elaborate on how you mounted the body on the chasis thanks
Sure thing the front hood still uses the 2 body clips to secure the front end and the back end fits so well around the rear bed that's attached to the chassis it cant really move out of place but for other bodys sometimes a bit of strong velcro each side at the rear really helps secure it underneath if you want an invisible method.
I only take it for slow crawls generally so its not jumping around like bashing type Rcs its even rolled a couple of times and stays all in place. Hope that helps thanks :)
Nice 👍
Thanks for checking it out
good job the nicest defenders are on this channel
Cool thanks very much !!!!
Loves the black wheel. Good job.
Thanks the black ones are my fav too 👍💥👍💥💯
Big like
THANKS 💯
White in that black wheel would look amazing
Good point I had those in the build video for it part 1 or 2 from memory check out the link at timestamp 14.23 ua-cam.com/video/qXqPKpM0gqs/v-deo.html
Definitely the black bead lock tires. Truck looks amazing. Looking forward to seeing it get some trail time.
thats the video ua-cam.com/video/Xss940QxG6g/v-deo.html
Thanks, another great video. I think ive watched all of you videos now. looking forward for the future.
You‘d better use metal primer to avoid metal chipping on the metal parts. Nonetheless great built.❤
Thanks💯💯
I looking for that wheels for my defender. great looking 👍 beast 💪 👌 Thanks for sharing!
Thanks for checking it out👍
Super COOL! Great work keep it up👍
Thanks very much for that much appreciated have a great day😁👍👍👍
White Wheels!!!
💯
Love watching your builds
Thanks very much makes it all worthwhile much appreciated😁😁👍👍👍👍👍
Espectacular excelente trabajo felicitaciones
Thanks very much for checking it out much appreciated :)
Black wheels for sure !! Great built thanks for sharing
Cool thanks for checking it out
Nice work dude 👌👌👌👌👌
Thanks very much😉😉
gorgeous💙
Thanks very much my friend😀💪
@@rcadventurer You're welcome
Great vid, no waffle, just action. Subbed. 👍
Cool thanks very much 😁😁😁👍👍👍👍
Awesome build and video 🚙👍
Cheers Mate
Black wheels great look i agree!!!!!
Cheers 😁👍👍👍
good work!
Thanks very much and cheers for checking it out 👍👍
Looking really good, I do personally greatly like the pick up defenders👍
Thanks very much yeah a bit different to the others as you see so many Trx4 defenders on the trails haha cheers for checking it out have a great weekend 👍👍
where can i find the bracjet the fits onto the rear bed? no the sping tailgate but the bracket you put on before you put the body back on?
The link in video description is where its from thanks
all the parts are from the same supplier from ebay check there shop on ebay for the various parts www.ebay.co.uk/itm/313401508643
Black
👍
Can I ask how you got the rear outer fenders back on the shell ? No holes in the bed to screw em back on
sure, tiny short screws and a spot of glue on them at 12.53 min in the vid you can just about see them sticking out in the rear inside on the video for some reason I forgot to show them being fitted oops!
@@rcadventurer 🙈😂😂 thank you ever so kindly buddy. Greatly appreciated 🙏🏻my pickup build is coming along great
@@gmann30 cool anytime glad yours is going well good luck matey
nice video good luck
Thanks very much 👍👍👍
Does the tailgate come with the bracket part to mount the tailgate door? all i can find is just the door but not the piece you are holding at 1:04. If not do you have a link to that part?
Yes you buy the rear bed and tailgate separately incase you don't one or the other I got it off there ebay shop www.ebay.co.uk/usr/noahsrcark1 cheers for checking it out 👍
Does the paint scratch off easily being on the outside? Not sure if i should do this or not.
Hi, No not at all this one had blue underneath so you wouldn't notice it if you had white under it may after a lot of use I don't bash my Rc's so its only light marks from going on forest trails mud etc and totally fine. I only painted the outside as the blue paint job was ruined so wanted to use the body instead of wasting it which is shown in part 1 of the build. Guess if your scraping up rocky areas scratching it lots might show more unless dark colour under the black 👍👍 l
@@rcadventurer thank's for the reply and info mate much appreciated 👍
Wish I had the patience to do this 😂
Haha yes at times it's ****** annoying that's for sure just gotta be in the right mood or impossible 👍👍👍👍
very good👍
Cheers my friend 😁👍💯👍💯
Hello it is a very nice build. looks great. What are the names of the inserts with the canisters for the windows and where can you get them.
Thanks just google Knight Customs Shapeways trx4 parts they have them 3d printed👍
Nice brother❤️❤️❤️
Cheers bro much appreciated 😎😎👍👍💯
Very nice look !!! I can't find the piece you are holding at 1:04. If not do you have a link to that part? thx
Sure all the rear bed parts are sold on Ebay by seller noahsrcark1 very helpful and all arrived quicky and good quality, hope the build goes well thanks
Great
Thanks very much for checking it out much appreciated😁👍👍👍👍
I know this is going to make me look stupid so please forgive me, I see quite a few people putting those two wires that go from the bonnet to the roof on their RC cars, what are they for?
No probs always better to ask, they are called limb risers the wires on the bonnet and the deflect branches etc when off roading if you check real 4x4 off roaders they sometimes have them. I bought mine off ebay from china thanks for checking the vid out
can you make a MST Dc1
I love those great suggestion dont people tend to like them stock and exact to the original not with loads of accessories and other bits, I tried to buy the Rc Discovery 3 also as I had one for real but they are not made and hard to get the body's for it seems Cheers for checking it out and watch out for the Dc1 build haha
Another great build, looking good.
I dig the black rims.
Are you going to flip the rear bumper mount upside down, or get another front mount to bring the rear bumper up closer. Or is there something keeping you from doing that.
Love the build!
Thanks very much and yes I will get a new rear bumper as that one is for when i have the spare tire on the back but sits too low for this one 😁👍💥👍💥👍
WHITE !!!
Cool thanks for checking it out 👍
Quality build fella Wer do u get the bits for the 2rear windows their awesome 👏
Thanks very much do you mean the black window mesh? that's from Ebay loads of sellers for the trx4 accessories thanks for checking it out 👍
@@rcadventurer no the rear side windows fella the look like tactical fuel cans or something like that 🤷🏻♂️🙏🏻. Appreciate you taking the time to reply fella 🙏🏻👍🏻💯
@@gmann30 oh yeah sorry my mistake they are rotopax fuel cans from shapeways Knight Customs 3D printed parts from US they have lots of 3D printed stuff for TRX 4 and crawlers 👍👍👍👍👍
@@rcadventurer cheers buddy thanks for your help there 💯 your builds are savage AF 💯👍🏻🔥
@@gmann30 Anytime cheers mate
is that pin not hot? omg
Yes it's a red hot poker haha gotta be careful but works a treat 👍💥👍💥
@@rcadventurer hahaha good work buddy
black
Thanks agree with you 👍👍💯💯
👏👏👏👍👍👍👍👌👌👌👌
Thanks very much 😁😁👍👍👍👍