Це відео не доступне.
Перепрошуємо.
Types Of PLC Discrete Output (Relay and Transistor)
Вставка
- Опубліковано 14 сер 2024
- Types of PLC output (relay and transistor)
Comparison between relay and transistor Output
Advantages and Disadvantages
Stored energy Protection Video:
• Use Diode for Protecti...
#PLCOutput
#TransistorOutput
#RelayOutput
#NPNConfiguration
#PNPConfiguration
Contact Information
Facebook page: / gizcon
Email Address: gizmocontrollers@yahoo.com
Blog: theautomatione...
Very good
Thaanks a Very clear explanation
Thank you good topic
Thanks for a useful chapter
Welcome bro
Excellent
thank you.... please share my videos
Nice. Informative!
Pkipalitan mo n lng sir yung thumbnail “discrete “ para mas appealing. San k nk-enroll ng mechatronics, sir?
@@ivo2111 Sa Saint Louis University Bagiuo ako
Great!!!
sir nice video naintindihan kona ngaun kung bakit ung binebenta sakin n plc is may sirang output terminal transistor type kasi sya un pla sakit ng transistor lalo na kapag madalas sya mag switching
Yup... Pero pag no choice ka na mag transistor... Mag install ka ng diode... Kasi ung mga bagonh module ngaun puro transistor na bihira na ung relay type
mas ok ba pag praktisan sir ang transistor kesa sa relay type
edi sir pag nag install ako ng diode naka direct sya sa plc output terminal papunta sa load
@@pinoyelectricalautomationm4856 pinapaliit nila ng pinapaliit ang PLC ngaun kaya mostly puro transistor type na ang nilalabas nila... sa load mo nlng sya iparallel.... Check mo ung isa ko pang video ung "tips in plc output protection"
tsaka sir dagdag ko nadin sa tanong ko ung transistor po ba fix na ung output nya ng 24v dc or pwede dn mag 110 ?
if i have multiple outputs, for example, a valve with two solenoids, one on each side, do i have to connect both solenoids to the power supply or do i just connect one to the power supply and connect both to the correspondent plc output?
if your configuration is NPN
connect 1 port of the solenoid to positive of power supply then connect the other port to PLC
do the same thing to the other solenoid
if your configuration is PNP
connect 1 port of the solenoid to Negative of power supply then connect the other port to PLC
do the same thing to the other solenoid
@@GizmoControllersMechatronics thanks!!
Hello, is it posible to activate a relay with the transistor output? what is required to do it? Thank you.
you need to use a diode for protection
you can watch the video below for more information
ua-cam.com/video/egFyWNWzENg/v-deo.html
ASTIG MORE POWERS SIR