E-flite Viper 90mm EDF Jet 🐍 | UNBOX, ASSEMBLY, RECEIVER & CG SETTINGS (English / Français) 4K UHD
Вставка
- Опубліковано 6 жов 2024
- Hi folks 👋🏻
Thanks a lot for watching this video, please subscribe to support the channel 🙏🏻🥰
Merci d’avoir regardé cette vidéo et n’hésitez pas à vous abonner 🙏🏻🥰
Get your Viper90 here ➡️ www.turbines-r...
🐍 🐍 🚀 E-flite Viper 90mm EDF Jet
Wingspan 1400mm, long 1281mm,
weight 2500gr empty, with HRB4000 3100gr, RT4400 70C 3177gr, HD4000 3182gr, CNHL4000 70C 3190gr, HRB5000 3245gr, CNHL5000 70C 3340gr
-FMS EDF 90mm 12 blades nylon composite (3.550kg THRUST) weights 340gr
-Motor: 3670-1950Kv Brushless Inrunner 4-pole (SPMXAM1400)
-ESC: AvianTM 130 Amp Brushless Smart ESC (SPMXAE1130A)
-8 Digital Metal-Geared servos
Jeti REX7 Assist
190 km/h top speed !
-Book CG is between 3 to 17mm (on the upper surface of the wing) from the back edge
of the front plastic wing mounting structure with model INVERTED, GEAR DOWN!
I will Maiden at 17mm and….???
CG 17mm:
HRB4000 60C (605gr) all the way front
RT44000 70C (677gr) 15mm back of front foam wall
HD4000 60C (682gr) 25mm back of front foam wall
CNHL4000 70C (691gr) 25mm back of front foam wall
HRB5000 50C (745gr) 35mm back of front foam wall
CNHL5000 70C (840gr) 45mm back of front foam wall
Rates: Aileron and elevator are Measured at the inside end. Rudder is Measured at the base.
My Low: aile 6mm (30%), elev 6mm (30%), rud 13mm (35%)
Mid (book’s low): ail 11mm (45%), elev 10mm (50%), rud 19mm (50%)
High (book’s high): ail 16mm (80%), elev 14mm (75%), rud 25mm (80%)
Flaps: 25/50mm without elevator compensation (4 sec delay)
Thanks again for watching and if you like my videos please like & subscribe ❤️ (it’s free haha 😉)
Follow me on Instagram : / arthuraerorc
#eflite #viper #jet - Спорт
Hi Arthur, I just ordered an FMS 90mm Viper Which I am told is the same as V3 E-Flight one. so look forward to this vid my friend .
Coooool well done !!!!
Great video!!
@@REGGIE142 thanks a lot I’m glad you liked it
Woh Arthur! Incredible new addition to your Hangar !, the 90mm Viper!
Looking forward to seeing the video of the Maiden Flight!
Yeaaaah i Hope very soon
Very nicely done ✅ Thank you ! I liked your reaction when you looked at the canopy 😉 this is a very nicely done BNF version . Hoping to get one this summer ! Where did you get your nice power screwdriver 🪛 set ? Please post link . Merci !
Thank you so much 🙏🏻🙏🏻🙏🏻 don’t hesitate to write me on Instagram « Arthur -RC » or Facebook Arthur JANIN ! I bought it on Amazon france and I don’t have the link anymore sorry my friend
Very nice rcplane, so iam wait you maiden
Hi ! Already maiden and there are videos of it, watch my playlist « jets » 😜
E-flite de très beaux avions, mais il y a toujours des trucs mal collé, ou qui se décolle trop facilement. Ils devraient tenir compte des remarques des clients sur ce point
Je te souhaite bon vol et attends tes ressentis et comparaisons avec par exemple l'avanti de motionrc 😁
Merci beaucoup ☺️🙏🏻🙏🏻🙏🏻
Awesome, would you show how you set crow on this jet? . I heard it performs very well for landing specially all my 6s are ranging from 800gm to 900gm which makes it speedy when landing. How crow can be done while keeping the reflex?
Btw I have the same but from FMS it is same factory but dark blue color ,looks amazing, so it seems that this is not an eflite, and more an FMS. I never had an eflite with snipping wings- I guess it is usually done by FMS
The crow / butterflies are set like a glider…ailerons a few millimeters up and full flaps down but check it in high altitude to set the elevator compensation
@@ArthurRC thanks 👌
Did you manage to get thrust-revers to work with your Jeti system ? I am goin to run EdgeTX on this plane and program the AVIAN-ESC with a programcard - so I was just curious in your case.
Unfortunately not…but you can buy things to do the conversion 😎
Very nice model! :)
Yes it is 🤩
Hi, did you manage to get the thrust reverse working with your Jeti setup?
I don’t have it with my Jeti unfortunately…😕
Amazing guy!!!!
🙏🏻♥️
Heya Arthur, did you win the lottery ? another member for your evergrowing hangar? Good luck with the maiden mate 👍👍👍
Haha oh no but i bought them a long time ago and not on the same time so that’s why…
Thanks my friend 👊🏻🥰
Salut Arthur ! Merci pour la vidéo, je vais pas tarder à craquer pour ce superbe jet, ça sera mon premier 😊
J’ai deux questions si tu me le permet :
Je voudrais savoir où tu as acheté ton support rouge pour poser l’avion ainsi que ton tournevis électrique ?
Je te remercie
@@Passiongamingti hello cooool félicitations ! Le support rouge vient des USA chez Ernst et tournevis Amazon 😅
@@ArthurRC merci pour ta réponse ! Pense tu qu’une Lipo de 4200 mah sera suffisant pour ce viper ?
@@Passiongamingti oui oui bien sûr entre 4000 et 6000 mah pourvu que tu aies le même CG que moi 😇
@@ArthurRC yes ! Centré arrière à 17 mm c’est le mieux apparemment 😉
@@Passiongamingti yes 🥳🥳🥳
Arthur, would you have the Jeti setup? Merci
What do you mean ?!
The servo assignments but I just figured it out. Merci
@@AN-ce1nd ah ok cool 👍🏻👍🏻😎
It would be real cool to get the reverse thrust to work. I will investigate unless you figured it out.
You can’t do it without buying a special module 😥 but with FMS ESC like I have on my pa-18 you can do it with Jeti 🥳
😊😊😊😊😊😊👍💯💯💯💯💯💯
Hey thanks my friend 🙏🏻🤩
Salut, tu l'as payé combien du coup sans récepteur ?
Oula je ne sais plus du tout…désolé ! Demande au revendeur chez qui tu veux l’acheter, il te donnera son prix 😊
J'ai vu avec Turbines rc, il a fait une exception dans le cadre de votre partenariat, sinon il n'ote pas le récepteur. Ce qui se comprend.
@@edouardschott9542 ah génial ils sont top chez TurbinesRC 🥳🥳🥳
il est toujours commercialiser ? il est en rupture de stock partout et meme les pieces de rechanges sont quasi introuvable....
Oui mais en rupture le temps qu’il en re fabrique je pense enfin j’espère…sinon envoie un mail directement à horizonhobby : service@horizonhobby.de