VPA Vapor Riser - Shooting 728 grain arrows and bareshaft - Adult arrows - Morrison Max 6 limbs
Вставка
- Опубліковано 2 жов 2024
- The setup contains the VPA Vapor riser, with Morrison Max 6 limbs. Aprox 50 pounds at my drawlenght (27") The arrows are Victory VAP ss V1 spine 350 with 145 grain steel insert/outsert and a 300 grain point. Overall arrowweight is 728 grains. The energy is 38,8 fps/KE and 0,5 momentum slugs.
#vparchery
#adultarrows
The setup contains the VPA Vapor riser, with Morrison Max 6 limbs. Aprox 50 pounds at my drawlenght (27") The arrows are Victory VAP ss V1 spine 350 with 145 grain steel insert/outsert and a 300 grain point. Overall arrowweight is 728 grains with 29,5% FOC. The energy is 38,8 fps/KE or 51 joules and 0,5 momentum slugs.
Where did you order that riser and limbs?😊
And what string are you using in this bow? What lenght?
The limbs is from Morrison Archery USA and the riser is from VPA Archery in USA. As I didn’t make this string I can’t say the exact type, but it is a 16 strand and should be a fast flight string. The bow is AMO 56” but a string for a AMO 54” fits this bow because of the big curves
@@peterjuulsgaard nice set-up Peter😊👌
You've beautifully tuned that bow Peter. Sounds very crisp. The arrows look great too.
Yeah not much sound with those heavy arrows
It looks like you're not quite into getting all That you can out of those limbsat your draw length. But my draw length would be to much for that beautiful bow, I draw 32". I'm looking at getting the Morrison limbs
These limbs are build for a 17” riser and 28” drawlenght. So thats why I’m using the 13” riser, since I draw 27”. If you draw 32” you should probably have longs, on a 19” riser. Its gonna be fast
👍good vídeo ,a perfec Arrow for Wild boards in Spain.
155 is fast with an arrow that heavy. Especially at a 50 pound pull 👍
Yeah It’s not bad with high braceheight and all too
Deadly combination. Peter are there wild boar in your hunting area ?
No we dont have Wild boars in Denmark anymore.
Hello Peter i know its about archery but love the dog great vid as always
Thanks man! He´s also a god doggy!
What did you use to elevate your hair rest
I use a small piece of wooden shaft that I cut in half, to create the bump
Pretty cool you could see the last arrow in slo mo and watch the arrow flex as it was going to the target. Guessing high FOC causes extra flex too, so more visible. Heavy arrows can quiet your bow down some too.
Normally my bows are shooting between 150 to 160 fps. With the arrow weight I’m chosing! But with these aggressive recurves I need this heavy an arrow to get down in that range to ophold the sight picture I know. It helps alot with noise and momentum too. Fun to play with. The last arrow was a bareshaft, and since there is no drag from the feathers it flexes most the way to the target. Just and indicator of perfect flight
What’s the AMO of the bow? Nice riser though 👍
AMO is 56" with this 13" riser. Yeah I´m actually impressed by this little riser
I’m having a hard time quieting my 6’s. Das 21 riser, 47@31. 3 under, even tiller. 490gr. Got silencers on 18 strand fast flight. Up to around 28” they’re quiet, but past that I get a lot of twang. What’s your tiller set at?
My tiller is a little negative with the real heavy arrows and more like even with say 600 grain and down. It’s probably the drawlenght, which I can not relate to, as my drawlenght is Only 27”
Great Combo and shooting Peter! What is the length of your string on that 56" bow please? greetings from Vienna
The string is 52” long. Thanks
Hey, Peter. I just purchased a Samick, 17" riser and their foam core limbs which gives me a 62" bow. I am getting 155 fps pulling 60# with same weight arrow. So, you are getting the same performance for 10# draw weight less! I need to save up for the VPA riser and Morrison limbs! Thanks again for another terrific video.
Two questions: What length are the limbs?
What energy calculation are you getting? I'm thinking 38.9?
Only 8 weeks until bow season here in Maryland. Cannot wait.
These limbs are medium limbs! So they are 60” on a 17 “ riser. It becomes 56” on the VPA riser. Yes there is alot difference in regular foam core and the super curves. Yes it’s around 39 KE/fps or 51 joules, Thanks for watching my freind, and shoot straight🏹
Woah! im running a very similar setup by chance 26.5 draw via 13 inch medium max 6 46# @ 26. arrow is 620 grains and goes about 150 fps. I might try a 550 grain total and get my speed back up. Ive been liking it a lot though! 1 inch nock point for me as well but 7 inch brace!
They are fun to shoot🏹 Thanks for watching🏹
Haha what do you want to hunt? I thought dinosaurs are extinct😂
😂 However! Heavy arrows helps dampening the bow, and brings down your point on distance, and I’ve never in my huntinglife been rescued by speed, anyway
Thanks for the upload Peter. What was your nock height for 3 under? That is my dream set up. I have vpa riser already but still saving for Max 6 limbs.
The nock height is quite high with these heavy arrows. Around 1” . Thanks for watching
Your abilities with the bow is exceptional Peter 👌
Thanks
I was thinking 130 -140 fps... 155fps is deadly, nice set up.
I especially like the Sound when I shoot! Thanks for watching👍
Nice setup. How much draw weight you gained going to VAP 13"from the initial draw weight marked on the limbs?
It’s marked 17” so I should have 4# , but because of the pad angle on the VPA its closer to 2-3#
@@peterjuulsgaard Thank you
What a cutie 🐶😍
Great video. Looking forward to watch new hunting videos with you and your bow :).
Thanks!
Mr. Peter where do you get your foam for your targets at? Also that is good tuning for a bare shafted arrow.
In this video I’m at the local Archery and hunting club, so it’s not mine. But this one is made of ethafoam plates pressed together.
Would those limbs fit onto any ILF riser?
Yes sir
That VPA riser and foam core carbon longbow limbs is the best bow I've ever shot. Accurate at 40 yards with wood or carbon arrows.
I like it too! Even though it’s short, it doesent feel that short
I actually just ordered some bamboo core carbon limbs. So maybe I should try them on this riser, when I get them
I love my VPA riser with Uhkka limbs it is becoming my favorite bow. Those arrows are too heavy for me and for a little roe deer may be more then you need lol. Darren
Yeah but probably perfect for a African wilderbeest, which I’m planning to hunt with this setup
@Peter Juulsgaard That will work great for those beast over in Africa they are very hard to put down. Good luck on your hunt!!! Darren
Nice shots as usual Peter. I like yr videos. My 38 weight 62’ recurve custom bow (take down) arrow spine730 Carbon one , 70 grain weight = Speed 198
Nice! What is your arrow weight and your drawlenght ??
@@peterjuulsgaard 8,5 grain. Draw 26,5
That'll go right through just about any game!!
I think you are right😊
God video- - som altid, bonus er lyden af en Dansk sommer. Mange hilsner fra Australien
Tak😀 ja der kan gå længe imellem det gode vejr her
Congrats on the new riser👍Geat tune there, what’s your point on with this setup 🤔
Thanks buddy! The point on is 26 meters. And not much Sound from the bow, so ideal
Awesome archery bro! I recently purchased a cold steel cheap shot crossbow.
Nice!
@@peterjuulsgaard thanks bro
Hi Peter, very nice combination. What is the brace height please?
I have it at 7,75”
@@peterjuulsgaard Thanks!
That the best limbs out there
I dont know all the others, though. But I like these
?tip to tip length of the bow ? did you get short, medium, or long limbsWhat
This is 56” bow and the limbs are medium
Form is great
Thanks
What's your tiller measurements
About 5 mm negative
@@peterjuulsgaard thank you mine is an 1/8th with nock height of 1/4 with a 638grain arrow but that's without the grip that came on it
These arrows are 728 grains, but I’ve changed that to around 630 grain. It’s a little more allround. Happy shooting
Good Speed for 14,5 gpp😳👍 The Bras High is 9" or more ?
No the braceheight is 7,75,, Thanks
Nice vizsla pup!
Thanks
👌👌👌👌👌
Perfect
Thanks
Nice bow hola dron mexico
Thanks!
very specific riser. I think its for a close range shot this bow set up is. What do you think of the HIT19 riser?ua-cam.com/video/cVpA9AlXNxs/v-deo.html
I think it is ugly😂 but it probably feels good
@@peterjuulsgaard Per my research of the USA bowhunters prefreneces it gose slike that: DAS Dalla, Tradtech Titan, Border Tempest, CD Ghost 19, HIT19, no order rpreferences
@@peterjuulsgaard also i researched some olympic archers and bare bow archers, so it figures that if you are after the long range shot then you should go for the longest riser possible and shortest limbs. and of course all say that theriser should be weight balanced with the weights inthe bottom for stability and presision shooting
@@alexyatsyuk70 If I’m going for a long shot, I’ll use my compound
Hello Peter, finally my VPA VAPOR RISER arrived today! But with my Oak Ridge Carbon Foam limbs it seems to be loud! How do you measure your draw? My limbs are Medium size, 45 lbs! My draw was measured with 29,5! But this can‘t be true! I am between your draw! I am going to measure again! I shoot split Finger! Tiller is set to 0. No negative or positive! Your bow seems to Whisper! My 17“ EXE Whisper Riser and Medium fibre an wood core are not so loud!
Thanks and stay healthy!
I measure my drawlenght just outside the riser and in. Why it’s loud I can’t say. I’m also shooting 728 grains arrows in this video. It helps. I am using limbsavers and stringdampers. So I think you just need to tinker with it. Stay safe your self
Hello Peter, Van you Tell me please, hey did you have a high braceheight? I know that the Riser have a very hard deflex geometry! What is the matter with spine 500 or 600 and lower grain. I am interested to buy a vapor riser, cause ist is very nice. Did. you buy Ur in USA? And what comes with the riser? Did you have a middle grip? I have ilf limbs from 30- 45 at 29“ on 19“ Riser! With the Vapor i think it is 56“ bow and about 34 and 50 lbs. Thank you
The brace height is 7,75 in this video, but now its at 7,5” . I’m shooting the heavy arrows because I like the Sound of the heavyer arrow and It’s performing quite Well. You can shoot lower grain of course. The spine depends on your point weight and on this arrow the point weight is 300 grain and a 145 grain insert, so 445 grain in front. Yes I ordered it from the USA and it have a medium grip