Great job as usual! I really like the overall design and it's going to be bitchin with some nice stepped and or bead rolled sheet metal to complete the bed. There's so much you can do with the bead roller to add not only strength but a nice flowing design as well.
Just throwing out some ideas but what about some expanded steel for the floor and just let it rust.....or maybe some 18ga sheet with a flap wheel finish in some sort of pattern. This project could also present a nice excuse to expand your business and skills......buy a bead roller and do a diamond embossed pattern on sheet panels with ribs separating the panels like an original wood floor would have been laid out.
The expanded metal would be too ratrodish for me. I’m either gonna keep it smooth, beadroll it or dimple die it in a pattern. Haven’t decided yet. The way I built the frame won’t make for symmetrical patterns if I stepped it with a beadroller.
GREAT video .. iv been looking for a video such as your's ...and it helped alot,so when i do my bed floor watch out my floor will be like no other....(HOPING)...KEEP IT UP
Glad I could help! Good luck! After completing my bed I would go with thinner gauge on the frame and slightly thicker on the sheet metal. I did 11ga on the frame and 18ga sheet metal.
I'm used to working with cheap crap too and I was over somebody's shop one day and I wished I could remember the name of them I can't but they came from a plant where they recycled carbon teeth and they used grinding disc not the flappy sandpaper but the grinding you could not wear that thing out I mean it take you 8 months to wear it out so I guess that might be something to look up what do they use in a factory or whatever they recycle carbon teeth since you do so much crying and cutting it's very hard but it doesn't become crystallized I guess you would say it continues to cut
I’m actually at some training in North Carolina right now. Thanks man, I’m hoping for some better projects this year! I’d like to get some air ride lined up for videos
You ain't going to put no lift kit in it and get it up off the ground do you need a skateboard to stick it under each door it kind of hurt my marshmallows I don't know if my Lucky charms is going to taste right you got to laugh about some of that pudding doing a good job ma'am this stuff don't get so mad about it certain people's comments because everybody is different you know what I like watching you because you cut up better than anybody else but I tell you what I know whistling diesel makes a lot somehow somewhere but I don't like watching him just destroy things that others could use you know he got enough money he goes by stuff and shreds it and tears it up drops it f**** it up excuse my language you know what I mean that's just a little bit and people make kids may want to see that but it's not a I just don't agree when there's so many people needing things and turn jar up things that they shredded like the sagging trucks they're sitting down the rear he wants to go buy them up and shred them and then put them in jars and yeah maybe get one lucky person cuz he can do that but the point about it is he's taking good things and destroying them instead of changing them anyways I'll continue to watch I haven't started watching a little bit of marsky and he's boring as crap but a lot of Intel Duff's got to open hood anyways
It's great to look back at the older vids and see how far you have come. Much respect to you
Vintage trucks and Ptang. Fun seeing the characters develop in these early, where it all began vidjas. ❤
I'm glad you updated your newer videos. Where u talk more. It makes them funny af. Your a good dude dude!!
Thanks!!!
@@PuddinsFabShop I mean no offense
This is definitely where Puddin came out of his UA-cam shell!
Love watching this old stuff. Very talented young man
Puddin looking forward to seeing how it turns out. Fab On. Weld On. God bless.
that's great design and fab work! I really like those hinges! Excellent!!!
Early Puddin' Comedy! Nice!
Found your channel recently. been going back in time, enjoying every show.
👊🏻👊🏻
Very cool learning some good things 👌
Hey puddin just watching this one again today. Crazy to see how far you’ve come. Love it. 🇦🇺
This is a nice ole truck
I learned some cool simple little set up tricks from this video!
Those hinges!!!! video sometime... maybe?
As always Thanks for sharing!
They should be real easy to build once I get a plasma table. I could see doing a video then!
Great job I really like how you design that truck
Yo yo yo, dem hinges off the hook , wow , take my hat off for ya
I love that chevronational
She’s a good one!
Those hinges look good
I recently subscribed , you are a very talented young man! It is BITCHEN! From a great grandma from California.
Thanks GG!
Neat idea those jinges!
Thanks!
Mr. bracketry aka Puddin.
Great job as usual! I really like the overall design and it's going to be bitchin with some nice stepped and or bead rolled sheet metal to complete the bed. There's so much you can do with the bead roller to add not only strength but a nice flowing design as well.
Yeah I haven’t even tried to Vision it yet lol
that was some sweet patiner fab work
Nice job there.
great job.....picked up your channel in the xmas burnout challenge....started at beginning and working my way thru
Man you have a long journey ahead of you! Don’t get too bored with the build videos!
Good work!
👍
Pretty cool I like it
You make it all look so easy. You laying on the bed welding was damned hilarious 😆
Just trying to get comfy!
@@PuddinsFabShop I'll have to try the leg kick and see if my welds turn out as good as yours :)
LMAO...kicking your feet like a little kid was damn funny!
😂 👍🏻👍🏻👍🏻
Watching
Just throwing out some ideas but what about some expanded steel for the floor and just let it rust.....or maybe some 18ga sheet with a flap wheel finish in some sort of pattern. This project could also present a nice excuse to expand your business and skills......buy a bead roller and do a diamond embossed pattern on sheet panels with ribs separating the panels like an original wood floor would have been laid out.
The expanded metal would be too ratrodish for me. I’m either gonna keep it smooth, beadroll it or dimple die it in a pattern. Haven’t decided yet. The way I built the frame won’t make for symmetrical patterns if I stepped it with a beadroller.
Thats fkn dope man. Love the creativity you put into all your work.
I like the way the hinges turned out. Could a hinge like that work the same way but make the bed hinge all the way from the header panel?
Hey brother you do good work and your vision is your own nice truck and carry all keep it up
Thanks!
GREAT video .. iv been looking for a video such as your's ...and it helped alot,so when i do my bed floor watch out my floor will be like no other....(HOPING)...KEEP IT UP
Glad I could help! Good luck! After completing my bed I would go with thinner gauge on the frame and slightly thicker on the sheet metal. I did 11ga on the frame and 18ga sheet metal.
Just found your channel. Great videos!
Thanks! I try hard on them to bring decent content. Please feel free to share.
Loved the video, nice job on the bed floor I will be following!
Thanks man!
Looks good! May need to incorporate the hinged portion into my raised bed floor. Might be nice to have a "trunk".
Nice for working on things as well!
You are so awesome my friend
Love it. Too bad your camera/ memory card messed up. Would love to see how you finished it.
Looking good! 🙂👍
Jacob - did you ever do a PART 2 to this video "Hinged Bed Floor (Shop Truck)" ?? Asking for a friend.
Love your idea... looks great
👊🏻 thanks
Great channel!! Keep up the great work!!
Thanks!
Bad ass. Did you put some hydraulic lift supports on there? Either way, bas ass. Great job
On those hinges you made why 6" pipe why not 4" and how much would you charge to make two pair?
Lets get some pics of that cousin! lol
PUDDIN make a bed, lol
Ima try this on my s15 pickup
👍👊
Now you can haul!
Yes sir
🇬🇧✊🏻
👍🏻
That 27 model t fiberglass body hanging is more interesting
I'm used to working with cheap crap too and I was over somebody's shop one day and I wished I could remember the name of them I can't but they came from a plant where they recycled carbon teeth and they used grinding disc not the flappy sandpaper but the grinding you could not wear that thing out I mean it take you 8 months to wear it out so I guess that might be something to look up what do they use in a factory or whatever they recycle carbon teeth since you do so much crying and cutting it's very hard but it doesn't become crystallized I guess you would say it continues to cut
I just stumbled upon your channel. Great work along with a sense of humor.
I subscribed.
Ya it seems like a fine line to ride with the humor lol people offend easy now a days.
Thanks for subscribing
How many hours did it take you to do the frame
All the sparks welding and grinding are gonna damage your back window you should have covered it up
what about thin wood for a floor also
I’m not really interested in wood. I like metal!
How did you mount bed to frame? Weld? Did you use any rubber mounts?
Just straight metal to metal mounts. No bushings.
Is your fab shop your full time gig ?
I wish but I work full time at another job. Maintenance at an injection molding plant.
@@PuddinsFabShop Hell yea ! Love all you projects !
I’m actually at some training in North Carolina right now. Thanks man, I’m hoping for some better projects this year! I’d like to get some air ride lined up for videos
What about some dimpldies? Not a Puddin custom fab without some
How much for you to make me a set of those hinges shipped to sanger texas?
👏👏👏👍👍👍😎😎😎🤙🤙🤙
2024 budro
Lol @ 9:50
You ain't going to put no lift kit in it and get it up off the ground do you need a skateboard to stick it under each door it kind of hurt my marshmallows I don't know if my Lucky charms is going to taste right you got to laugh about some of that pudding doing a good job ma'am this stuff don't get so mad about it certain people's comments because everybody is different you know what I like watching you because you cut up better than anybody else but I tell you what I know whistling diesel makes a lot somehow somewhere but I don't like watching him just destroy things that others could use you know he got enough money he goes by stuff and shreds it and tears it up drops it f**** it up excuse my language you know what I mean that's just a little bit and people make kids may want to see that but it's not a I just don't agree when there's so many people needing things and turn jar up things that they shredded like the sagging trucks they're sitting down the rear he wants to go buy them up and shred them and then put them in jars and yeah maybe get one lucky person cuz he can do that but the point about it is he's taking good things and destroying them instead of changing them anyways I'll continue to watch I haven't started watching a little bit of marsky and he's boring as crap but a lot of Intel Duff's got to open hood anyways
SHITT!!!
👍🏻
Your cousin a little guy or little girl you better throw a picture up there cross-sided I'm just messing with you
Your going to get a cancer to the hot side of your face by not having a mask
Ya I try not to do that anymore.
@@PuddinsFabShop use a pipe welders mask