I spent a LONG time making this work for my TP Link Archer C7. Didn't have repeater or repeater bridge option available to me so I had to go to client bridge and use some other resources to learn how to do that. Through it all, though, I really enjoyed your videos. I watched them all over and over again as I taught myself how to do this. Thanks for the great work. I'm happy to report that I now have a 2nd router for both wired connections in another room (away from my main router) and as an access point for wifi. Amazing! Thank you.
After decades of being a computer user, I have concluded that they are terrible at doing anything consistently and correctly. Bluntly: computers suck. If you accept and embrace this as "Computers suck. I can change some things if I have the power and ability, but much of my time will be spent dealing with something not working correctly." then, you'll be OK. The things that work best on a computer are the power button and the gravity that pulls it toward the earth when I throw it into the air or trash pile. I commend you for helping others.
Hi, want to thank you so much for "power cycle multiple times" advice. I was losing my mind with my e2500 trying to make it run as repeater for WiFi range extender. Eventually had to settle for different name SSID and repeater bridge mode, although outside of having different SSID it all works as simple repeater should (wiki says repeater bridge shouldn't work as WiFi extender, only as a WiFi to LAN modem). And darn thing was refusing to work before 4 restarts.... Good advice. Cheers
@@Behfor can u help me....i configure other wifi router on bridge mode, disable dhcp ...its working fine and and one of the days just dont want obtain ip addreess......i configure 2x ,watch videos,set up good... work mamy days and again bridge wifi cant obtain ip address on any device....what i can do!?
If nothing else, and you're sure the settings are right, reset your HOST router to default and reset the basics like local IP, wifi ssid and password, upnp, etc. Then try your bridge again. Sometimes the settings get corrupted in the host and prevents successful bridging. Ive ran into this issue more than once.
Hello. Nice videos, well explained and illustrated. Very straight forward. When I change the IP address of the DD-WRT repeater (linksys), I was able to access the web interface for sometime. But just after a few minutes, browser was not able to access it anymore. Got any idea what's wrong? Cheers!
I don't use Repeater + Repeater Bridge.. I use AP + Client Bridge. You have to set the AP side on 2ghz to NG Mixed or on 5ghz to NA Mixed mode for it to work, as WW DRT doesn't seem to support the other modes for the AP side. On the Client side just set to Client Bridge and for SSID punch in not the name of that piece of hardware, but the name of the AP SSID you are connecting to.
I setup the repeater bridge with my mobile hotspot and it works, It isn't broadcasting the ssi for the second router. Now I can't enter the second router settings as it just times out. I know I am using the right ip address. I had this working with a different hotspot and had the same problem. I had to reset the router to get into settings. Any help with this would be appreciated. Thanks
on the ddwrt firmware you would need to enable the wan to DHCP, AND THEN ONLY CHANGE THE SECONDARY ROUTERS IP TO ANOTHER SUBNET OR LAST OCTET. THEN UTILIZE REPEATER OR REPEATER BRIDGE OR IF IT IS A DUAL BAND ROUTER ON AN UPDATED DDWRT FIRMWARE YOU CAN UTILIZE CLIENT MODE ON ONE BAND THEN AP MODE ON ANOTHER BAND FOR WIFI. NO NEED TO UTILIZE GATEWAY OR DNS....ON SETUP PAGE IT WILL USE A VLAN SETUP IN THE FIRMWARE AUTOMATICALLY ON THE WAN DHCP
Hi! Im traying to configure my Linksys EA2700 and have the issue with the wifi. If dont have seciruty can connect, bur putting the same o others modes of security cant connect it. There are something that i can try? Thank you!!!
I had same issue with E2500. For me it worked after I configured everything like in wiki on "repeater bridge", but had to use different WiFi name for second network. After all is done disable password on second network. Restart router a few times (let it boot like 2 min every time). Then enable password and again after saving and applying settings reboot up to 5 times (recommend by removing cable). Worked out for me. In my case issue was reboots. Eventually it worked.
Great videos! Useful and entertaining at the same time. I set up Client bridge and everything is excellent except one thing, I have internet working on my laptop connected with LAN cable to 2nd router and 2nd router is emitting wifi but can not connect to wifi with any device. Tried what us said to remove security and connect or change it or power cycle router still no success. So if you have any other clue or advice I will be thankful, I mean more thankful then I am now. Thanks :)
Hi, do you mean Client bridge or Client bridge (routed)? if you mean Client bridge (Routed), that's the same as Repeater bridge, which I have a video explaining it. If you mean Client bridge, there is no need to configure a virtual interface because the client bridge does not broadcast a network. Thanks.
After putting the ddWRT on repeater bridge mode , I am not able to log into its web interface settings page to do further modification. Is there a way around. The ddWRT is now working in the repeater bridge mode. Wired and wireless connections are all fine.
@Behfor I'm trying to get two Linksys 54GLs linked as a repeater bridge (one as gateway, other as extender). The connection establishes fine, until I add a VAP. Once I do the bridge link disappears, delete the VAP and the link comes back up. Yet the same setup with a 3rd party router as gateway and it works perfectly. It's just an issue trying to link two identical GLs together and add a VAP Running v3.0-r45036 std (12/17/20). Have you run into this issue before ?
Yeah, I remember similar issues using old firmware/hardware, I guess (I could be wrong) it was a known issue back then, however I personally haven't had that issue anymore using newer hardware such as ASUS AC68U as an extender.
@@Behfor The two GLs as repeater bridges work fine, until I try to swap in the 3rd one as gateway. I'll just keep things as is for now with the AC router as gateway and eventually change them all for newer hardware such as WRT1200AC or 3200ACM. It was an interesting mini project trying to get them all linked and hooked to the net. Thanks for the feedback.
Man I've being trying this for days... My has tons of issues, sometimes i cant connect devices to the repeater and other times i can but i dont have access to the main network (main router)
@@Behfor I tried... i was able to run but with two different networks, one 10.0.0.1 and the main router on 192.168.1.1... the DHCP forwarder didnt work for me...
I have the Linksys E900 trying to setup in repeater mode. I followed your tutorial but I found that only few firmware versions would work with virtual interface. Specifically, k2.6 r25947 or before, but the stability is questionable... k3.x r34411 works fine and has fixes for the KRACK vulnerability. Later versions of the k3.x has issues with setting up a WiFi broadcast, password incorrect, cannot connect to Internet, or would just break the repeater function... Do u have a recommended firmware build for this router?
Thanks for your video..this is the 2nd video I have watched regarding the repeater mode..so I set up my tmobile cellspot 1900 with an asus n12 as the repeater that works..thanks to you, but I have found out the speed on the repeater was so slow, my cable internet speed is 100mbps down, somehow I could only get 5mbps or mostly lower than that..download speed from the repeater, is there anyway to make it faster, is the AP mode faster than repeater mode. thanks.
Hi, thanks for the question. The AP mode should be faster than the Repeater mode because the repeaters usually can offer half (or even less) the bandwidth (due to wireless is half duplex and etc)! If it is possible for you to use the AP mode, I would definitely suggest to use the AP mode, the repeater is only suggested when the wiring for a new AP is not possible. Thanks!
Hey Behvor, need some help with connecting as a repeater (or RB) - router B not connecting to Router A -firmware is good (since I already used this router as a repeater before) -after setting up - I did restart the router couple times - to give time to join the network but it is not joining it
Great vid, I'm just having a slight problem, after getting connected to the internet, I can no longer access ddwrts web interface, would you have any ideas on how I could solve this? Thanks
@@Behfor I seem to have fixed that issue but I've ran into another, my connection speed is halfed when connecting to the repeater bridge, I understand this is normal behavior for both repeaters and repeater bridges because they are essentially using one radio for two separate data streams. However I have a dual band router, and from what I've read it seems you can get around the halfing issue by using one channel for clients to connect too, and one for "backhaul", would you know how I could do this? I can only see mentions of the process online and no solid guides, thanks again
Hi Behfor and thanks for doing this video. I have a TP-Link C7 archer as my second router and this has Atheros CPU. After watching your videos last year on doing a Repeater Bridge and with the C7 archer router not having the Repeater Mode setting, this just through me and trying to search UA-cam for this problem with no success. With this video, you have shown and covered a small portion on this: 3:54 - thank you but I still get confused as first: . is "Client" the same as "Repeater" with "Client Bridge" the same as "Repeater Bridge" - if not what is the difference between "Client" and "Client Bridge" also from 4:14, where it shows about Atheros Considerations notes, it states "then create a virtual interface to broadcast the new SSID -does it has to be a "new" SSID, fo you can have the same SSID as your wireless network Last, this maybe too much to ask, but as I mentioned before, I was checking on UA-cam for this "No Repeater Bridge" mode, I send out afew requests to other UA-camrs on this with no replies - possible to do a video of a router with Atheros CPU - I even get people reply back to me it I found the answer Thanks for your time and keep up the videos - Sean (Australia)
Hi Sean, thanks for the questions! 1- The difference between the Client bridge and Repeater bridge (or client and repeater) is that in the repeater mode the secondary router broadcasts a SSID but in the client mode it doesn't! Basically the client one is only for the wired clients connected to the secondary router but the repeater is for the wired and wireless clients! Normally if you select the client or client bridge options and save the page, you don't even have the option to add a virtual interface (create a wireless network for the secondary router)! However with Atheros routers, if you select the client or client bridge option you should still have the option to add a virtual interface! 2- The new SSID can be the same as the primary router or different. I've actually used both in the past! 3- Unfortunately I do not own a router with an Atheros CPU right now, but if I ever do in the future I'll sure do that! Thanks and hope this was helpful :-)
I am able t to successfully install DDWRT on my old dlink router but I am having problem with connecting my laptop and android phone to the secondary router wirelessly. I am keeping gettting wrong password error. I am entering correct passwords. I tried ur solution of no password. but it does not work. is there any other solution for it? I am able to connect my laptop through wired to my secondary router and able to access the internet. primary and secondary router are communicating fine.
Hi bro Behfor plz help me. I have tp link 801nd same time this router , internet may not be available , Why did it come? Can you tell us what is the reason? Plz
Behfor DO NOT GIVE UP on YT videos. I think there is a gap on the YT market and hunger for WIFI channel like yours. Wifi issues are and will be in our lives and you have ability to provide simple ( yes I need simple ) way of explaining complex stuff. Your Repeater videos showing that you can keep same SSID and same Network IPs was a deal breaker to me. You could focus on bench-marking , that could give you enough material for videos. For example: Compare speed performance on AiMash 2xAC68U ( ~80$ ) vs AiMesh 2xAC86U ( ~350$ ) Or benchmark 68U speed and signal under Merly, Tomato, DD-WRT, OFW etc.. Ask ASUS/Netgear for promotional samples. keep going!
WPA2 PSK is same as WPA2 Personal AES. PSK means pre-sheared key, meaning it's a constant password. That's what WPA2 personal does. AES is just encryption method and it's default on most WPA2 networks
Yes. But only if your internet is fast enough to fill the bandwidth. In my case it's exactly half from 80mbps to 40mbps. I think directly on cable I would get almost 100. But it all comes down to your needs. For me half the speed doesn't matter as WiFi users on extended are low speed anyway (highest bandwidth they need is UA-cam and it streams 1080p just fine)
You should do a video where you connect multiple wireless routers together with ethernet cables on the same subnet with the same SSID. I use 3 DDWRT routers in different buildings to provide wireless over a wide area and a reliable wired connection for IPTV cameras. That way, I can get a wireless signal for internet radio and I don't risk losing the camera feed if the WiFi stops working. There were no good tutorials on this, so if you could do one, it might help someone in the future.
![[HOWTO] Set Up DD-WRT Repeater (Extend WiFi Range)](http://i.ytimg.com/vi/rmB7n-ABNaA/mqdefault.jpg)
I spent a LONG time making this work for my TP Link Archer C7. Didn't have repeater or repeater bridge option available to me so I had to go to client bridge and use some other resources to learn how to do that. Through it all, though, I really enjoyed your videos. I watched them all over and over again as I taught myself how to do this. Thanks for the great work. I'm happy to report that I now have a 2nd router for both wired connections in another room (away from my main router) and as an access point for wifi. Amazing! Thank you.
Thanks so much! I'm very happy you are enjoying the videos and also could use your secondary router to extend your wi-fi, that's awesome :-)
After decades of being a computer user, I have concluded that they are terrible at doing anything consistently and correctly. Bluntly: computers suck. If you accept and embrace this as "Computers suck. I can change some things if I have the power and ability, but much of my time will be spent dealing with something not working correctly." then, you'll be OK. The things that work best on a computer are the power button and the gravity that pulls it toward the earth when I throw it into the air or trash pile.
I commend you for helping others.
After watching a bunch of videos this is the one that solved my problem. You saved my life, Behfor! Thank you.
Glad to hear this video was useful, thanks 😀👍
Hi, want to thank you so much for "power cycle multiple times" advice. I was losing my mind with my e2500 trying to make it run as repeater for WiFi range extender. Eventually had to settle for different name SSID and repeater bridge mode, although outside of having different SSID it all works as simple repeater should (wiki says repeater bridge shouldn't work as WiFi extender, only as a WiFi to LAN modem). And darn thing was refusing to work before 4 restarts.... Good advice. Cheers
Awesome explanation! Loved the recap at the end. That was great info on how to find the best firmware for the router. Thank you
Thanks a lot for the nice comment! I'm very glad you liked this video :-)
@@Behfor can u help me....i configure other wifi router on bridge mode, disable dhcp ...its working fine and and one of the days just dont want obtain ip addreess......i configure 2x ,watch videos,set up good... work mamy days and again bridge wifi cant obtain ip address on any device....what i can do!?
If nothing else, and you're sure the settings are right, reset your HOST router to default and reset the basics like local IP, wifi ssid and password, upnp, etc. Then try your bridge again. Sometimes the settings get corrupted in the host and prevents successful bridging. Ive ran into this issue more than once.
Tysm for the awesome help. I used client bridge and it worked!
You're very welcome! Glad it was useful for you 👍🙂
Hello. Nice videos, well explained and illustrated. Very straight forward.
When I change the IP address of the DD-WRT repeater (linksys), I was able to access the web interface for sometime. But just after a few minutes, browser was not able to access it anymore. Got any idea what's wrong?
Cheers!
I don't use Repeater + Repeater Bridge.. I use AP + Client Bridge.
You have to set the AP side on 2ghz to NG Mixed or on 5ghz to NA Mixed mode for it to work, as WW DRT doesn't seem to support the other modes for the AP side.
On the Client side just set to Client Bridge and for SSID punch in not the name of that piece of hardware, but the name of the AP SSID you are connecting to.
I setup the repeater bridge with my mobile hotspot and it works, It isn't broadcasting the ssi for the second router. Now I can't enter the second router settings as it just times out. I know I am using the right ip address. I had this working with a different hotspot and had the same problem. I had to reset the router to get into settings. Any help with this would be appreciated. Thanks
Use different SSID from your first routers.
on the ddwrt firmware you would need to enable the wan to DHCP, AND THEN ONLY CHANGE THE SECONDARY ROUTERS IP TO ANOTHER SUBNET OR LAST OCTET. THEN UTILIZE REPEATER OR REPEATER BRIDGE OR IF IT IS A DUAL BAND ROUTER ON AN UPDATED DDWRT FIRMWARE YOU CAN UTILIZE CLIENT MODE ON ONE BAND THEN AP MODE ON ANOTHER BAND FOR WIFI. NO NEED TO UTILIZE GATEWAY OR DNS....ON SETUP PAGE IT WILL USE A VLAN SETUP IN THE FIRMWARE AUTOMATICALLY ON THE WAN DHCP
thank you so much best tutorial on this subject
You're very welcome! :-)
thanks very much very useful tips regarding common troubleshoot areas that i wondered about
Thanks, very good information
Hi! Im traying to configure my Linksys EA2700 and have the issue with the wifi. If dont have seciruty can connect, bur putting the same o others modes of security cant connect it. There are something that i can try? Thank you!!!
I had same issue with E2500. For me it worked after I configured everything like in wiki on "repeater bridge", but had to use different WiFi name for second network. After all is done disable password on second network. Restart router a few times (let it boot like 2 min every time). Then enable password and again after saving and applying settings reboot up to 5 times (recommend by removing cable). Worked out for me. In my case issue was reboots. Eventually it worked.
You could do a tutorial on how to configure openvpn in server mode in DDWRT, the tutorials that are there are obsolete.
Hi Behfor, this video is very helpful i am able to configure the repeater but i am stuck my repeater not broadcasting, any advice will be appreciated
Can I bridge one client Station to multiple base stations?
I want to achieve layer 2 roaming. Could I do it like this or how? Thanks
Great videos! Useful and entertaining at the same time. I set up Client bridge and everything is excellent except one thing, I have internet working on my laptop connected with LAN cable to 2nd router and 2nd router is emitting wifi but can not connect to wifi with any device. Tried what us said to remove security and connect or change it or power cycle router still no success. So if you have any other clue or advice I will be thankful, I mean more thankful then I am now. Thanks :)
Hey thanks for the vid. I wanted to go for the client bridge route how do I configure the Virtual interface. Thank you
Hi, do you mean Client bridge or Client bridge (routed)? if you mean Client bridge (Routed), that's the same as Repeater bridge, which I have a video explaining it. If you mean Client bridge, there is no need to configure a virtual interface because the client bridge does not broadcast a network. Thanks.
Show this setting use cable from the main router to Asus router and config it on repeater mode use different local IP .
After putting the ddWRT on repeater bridge mode , I am not able to log into its web interface settings page to do further modification. Is there a way around. The ddWRT is now working in the repeater bridge mode. Wired and wireless connections are all fine.
Are you using the NEW IP ADDRESS to log in or the old one? If you changed the DD-WRT Router's IP address, you should use the new IP address to login.
is there a difference in speeds between both when using the repeated wifi signal?
@Behfor I'm trying to get two Linksys 54GLs linked as a repeater bridge (one as gateway, other as extender). The connection establishes fine, until I add a VAP. Once I do the bridge link disappears, delete the VAP and the link comes back up. Yet the same setup with a 3rd party router as gateway and it works perfectly. It's just an issue trying to link two identical GLs together and add a VAP
Running v3.0-r45036 std (12/17/20). Have you run into this issue before ?
Yeah, I remember similar issues using old firmware/hardware, I guess (I could be wrong) it was a known issue back then, however I personally haven't had that issue anymore using newer hardware such as ASUS AC68U as an extender.
@@Behfor The two GLs as repeater bridges work fine, until I try to swap in the 3rd one as gateway. I'll just keep things as is for now with the AC router as gateway and eventually change them all for newer hardware such as WRT1200AC or 3200ACM. It was an interesting mini project trying to get them all linked and hooked to the net. Thanks for the feedback.
Man I've being trying this for days... My has tons of issues, sometimes i cant connect devices to the repeater and other times i can but i dont have access to the main network (main router)
Have you tried to troubleshoot?
@@Behfor I tried... i was able to run but with two different networks, one 10.0.0.1 and the main router on 192.168.1.1... the DHCP forwarder didnt work for me...
I need help...
In router bridge mode when i open site survey nothing shows up...
But when i choose repeater mode all the networks show up.
I have the Linksys E900 trying to setup in repeater mode. I followed your tutorial but I found that only few firmware versions would work with virtual interface. Specifically, k2.6 r25947 or before, but the stability is questionable... k3.x r34411 works fine and has fixes for the KRACK vulnerability. Later versions of the k3.x has issues with setting up a WiFi broadcast, password incorrect, cannot connect to Internet, or would just break the repeater function... Do u have a recommended firmware build for this router?
Have you find any solution?
Thanks for your video..this is the 2nd video I have watched regarding the repeater mode..so I set up my tmobile cellspot 1900 with an asus n12 as the repeater that works..thanks to you, but I have found out the speed on the repeater was so slow, my cable internet speed is 100mbps down, somehow I could only get 5mbps or mostly lower than that..download speed from the repeater, is there anyway to make it faster, is the AP mode faster than repeater mode. thanks.
Hi, thanks for the question. The AP mode should be faster than the Repeater mode because the repeaters usually can offer half (or even less) the bandwidth (due to wireless is half duplex and etc)! If it is possible for you to use the AP mode, I would definitely suggest to use the AP mode, the repeater is only suggested when the wiring for a new AP is not possible. Thanks!
Hey Behvor, need some help with connecting as a repeater (or RB)
- router B not connecting to Router A
-firmware is good (since I already used this router as a repeater before)
-after setting up - I did restart the router couple times - to give time to join the network but it is not joining it
Awesome
Great vid, I'm just having a slight problem, after getting connected to the internet, I can no longer access ddwrts web interface, would you have any ideas on how I could solve this? Thanks
Thanks! Did you change the repeater's IP address in the process? If you did, do you use the new IP address to access the ddwrt router or the old one?
@@Behfor I seem to have fixed that issue but I've ran into another, my connection speed is halfed when connecting to the repeater bridge, I understand this is normal behavior for both repeaters and repeater bridges because they are essentially using one radio for two separate data streams. However I have a dual band router, and from what I've read it seems you can get around the halfing issue by using one channel for clients to connect too, and one for "backhaul", would you know how I could do this? I can only see mentions of the process online and no solid guides, thanks again
Long time no see you. Happy New Year.
Have you been fighting a lion?... what a messy hair LOL!!
Hey! Happy New Year to you too!
You guessed it right buddy! And it was a big lion! Hair is the least of the problems right now LOL!!
Hi Behfor and thanks for doing this video. I have a TP-Link C7 archer as my second router and this has Atheros CPU. After watching your videos last year on doing a Repeater Bridge and with the C7 archer router not having the Repeater Mode setting, this just through me and trying to search UA-cam for this problem with no success.
With this video, you have shown and covered a small portion on this: 3:54 - thank you but I still get confused as first:
. is "Client" the same as "Repeater" with "Client Bridge" the same as "Repeater Bridge" - if not what is the difference between "Client" and "Client Bridge"
also from 4:14, where it shows about Atheros Considerations notes, it states "then create a virtual interface to broadcast the new SSID -does it has to be a "new" SSID, fo you can have the same SSID as your wireless network
Last, this maybe too much to ask, but as I mentioned before, I was checking on UA-cam for this "No Repeater Bridge" mode, I send out afew requests to other UA-camrs on this with no replies - possible to do a video of a router with Atheros CPU - I even get people reply back to me it I found the answer
Thanks for your time and keep up the videos - Sean (Australia)
Hi Sean, thanks for the questions!
1- The difference between the Client bridge and Repeater bridge (or client and repeater) is that in the repeater mode the secondary router broadcasts a SSID but in the client mode it doesn't! Basically the client one is only for the wired clients connected to the secondary router but the repeater is for the wired and wireless clients! Normally if you select the client or client bridge options and save the page, you don't even have the option to add a virtual interface (create a wireless network for the secondary router)! However with Atheros routers, if you select the client or client bridge option you should still have the option to add a virtual interface!
2- The new SSID can be the same as the primary router or different. I've actually used both in the past!
3- Unfortunately I do not own a router with an Atheros CPU right now, but if I ever do in the future I'll sure do that!
Thanks and hope this was helpful :-)
@@Behfor Hi and thanks for the quick reply and going through and answer my questions. Keep coming with the videos and Happy New Year...
My pleasure! Happy New Year to you too :-)
I am able t to successfully install DDWRT on my old dlink router but I am having problem with connecting my laptop and android phone to the secondary router wirelessly. I am keeping gettting wrong password error. I am entering correct passwords. I tried ur solution of no password. but it does not work. is there any other solution for it? I am able to connect my laptop through wired to my secondary router and able to access the internet. primary and secondary router are communicating fine.
i m not able to connect my router by lan... by wifi i m able to...
@Behfor did you prefer e900 or nv64k build for K3X?
Hi bro Behfor plz help me. I have tp link 801nd same time this router , internet may not be available , Why did it come? Can you tell us what is the reason? Plz
BUENAS HERMANO TUS TU TUTORIALES SON EXCELENTE SOLO NECESITO TRADUCIRLOS EN ESPAÑOL COMO PODEMOS HACER
Yo te ayudo.
Behfor DO NOT GIVE UP on YT videos. I think there is a gap on the YT market and hunger for WIFI channel like yours. Wifi issues are and will be in our lives and you have ability to provide simple ( yes I need simple ) way of explaining complex stuff. Your Repeater videos showing that you can keep same SSID and same Network IPs was a deal breaker to me.
You could focus on bench-marking , that could give you enough material for videos.
For example: Compare speed performance on AiMash 2xAC68U ( ~80$ ) vs AiMesh 2xAC86U ( ~350$ )
Or benchmark 68U speed and signal under Merly, Tomato, DD-WRT, OFW etc..
Ask ASUS/Netgear for promotional samples.
keep going!
Is there a new update for ww DRT firmware? My router uses wpa/wpa2 psk security, but I do t have that option.
WPA2 PSK is same as WPA2 Personal AES. PSK means pre-sheared key, meaning it's a constant password. That's what WPA2 personal does. AES is just encryption method and it's default on most WPA2 networks
Will the repeater bridge to extend my WiFi work with an ATT Arris router combo ?
Your primary router could be anything, and if it is at&t it should work fine.
Behfor that’s great because I want to use Linux anywhere possible.
I cant find the broadcom for linksys e1200v2
Did you find it?
don't repeaters cut down speeds in half?
Yes. But only if your internet is fast enough to fill the bandwidth. In my case it's exactly half from 80mbps to 40mbps. I think directly on cable I would get almost 100. But it all comes down to your needs. For me half the speed doesn't matter as WiFi users on extended are low speed anyway (highest bandwidth they need is UA-cam and it streams 1080p just fine)
Wifi frequent disconnection is client's bane.
You should do a video where you connect multiple wireless routers together with ethernet cables on the same subnet with the same SSID.
I use 3 DDWRT routers in different buildings to provide wireless over a wide area and a reliable wired connection for IPTV cameras. That way, I can get a wireless signal for internet radio and I don't risk losing the camera feed if the WiFi stops working.
There were no good tutorials on this, so if you could do one, it might help someone in the future.
Can you help me