Muy buen trabajo amigo, me encanta el video, yo tengo una igual y tengo un problema me gustaría tu ayuda, mi moto le cuesta mucho arrancar, cuando ya arranca trabaja estupendo pero es muy difícil de arrancar. Que puede ser?? Membrana de carburador? Solo arranca con spray inflamable en admisión... Si no no arranca 😢 ayuda amigo un saludo
Ciao. Bel video. Una domanda: esiste una scatola dei fusibili? Te lo chiedo perché non mi funziona la luce abbagliante e anabbagliante, nonostante abbia sostituito la lampada. Grazie mille per la tua risposta
@@latzkoworks sei sicuro? Nel manuale delle istruzioni della moto, non dice nulla circa una scatola dei fusibili. Gli unici fusibili sono quelli che si trovano vicino batteria, nel vano.. In ogni caso, tu lo sapresti per certo? Non avresti un video o foto? 🙏🙏🙏
Szia, én is egy ilyen 1996-os kiadású, 250.4uc1 Motorkod motort rakok rendbe, egy gondom van hogy a hőfokjelző soha nem megy 80-90 fok körül, vagyis a műszer vízszintes vonaláig, a pedig forró, van szerviz leírások, és azt írja hogy a 12votlnak a szenzoron kell lennie, a gyertya felett van, na oda csak 4,7volt megy.. A műszerfalon alul a bekötés rendbe tisztitva.. Van ötleted? Köszi szépen.
Szia, a kijelző sokszor pontatlan. Én ki szoktam szerelni a termosztátot, beteszem egy kis fazék vízbe és melegítem. Hőmérővel mérem a víz hőfokát, ha a termosztát szemmel láthatóan kinyit kb 90 fokos víznél akkor jól működik.
I bought a majesty 96. This video will help me a lot thanks. I want to change the spark plug and oil
Thank you, have a good luck!
Just about to start doing carb on mine. It's 96 majesty with the drum rear brake. Been with me 15 years.
Have a good luck with it!
@@latzkoworks thanks man. This oldie might have close to 100k, odometer died 10 years ago. Outstanding quality made in Japan
This scooter is japan masterpiece, loved it before T-Max.
You are right.
How long did you work on the scooter for this all?
Hello, about 10-12 hour.
Great and helpful video. Thanks!
Hi, Can you tell me what liquid you used in the ultrasonic machine?
Hello, thank you! The liquid is 50% distilled water and 50% water based dirt remover.
Muy buen trabajo amigo, me encanta el video, yo tengo una igual y tengo un problema me gustaría tu ayuda, mi moto le cuesta mucho arrancar, cuando ya arranca trabaja estupendo pero es muy difícil de arrancar. Que puede ser?? Membrana de carburador? Solo arranca con spray inflamable en admisión... Si no no arranca 😢 ayuda amigo un saludo
Hello, it could be a lot of things, first you should dismount the carburetor and check the jets, diaphragm, choke, etc. Thanks for watching!
Did you buy a different variator for better acceleration/top speed or did you just use the original one?
Hello, just use the original one after cleaning it.
For whats the screw of min 21.30 that needs to be turn 2 times?
I have another majesty :)
Hello, it is the pilot screw, it does the fuel/air mixture at idle speed.
@@latzkoworks Do you know what's the screw for the mixture at high or normal speed?
Hello, it only depends on the year of manufacture, not the speed. Above 1/3 gas the mixture depends on the needle and the main jet.
Ciao. Bel video.
Una domanda: esiste una scatola dei fusibili? Te lo chiedo perché non mi funziona la luce abbagliante e anabbagliante, nonostante abbia sostituito la lampada. Grazie mille per la tua risposta
Hello, I am sure it has a fuse box, but I don't know where. Used to be a "headlight" named fuse in it.
@@latzkoworks mi faresti sapere? Grazie mille
@@franciljkk it should be under the seat, left side.
@@latzkoworks sei sicuro? Nel manuale delle istruzioni della moto, non dice nulla circa una scatola dei fusibili. Gli unici fusibili sono quelli che si trovano vicino batteria, nel vano..
In ogni caso, tu lo sapresti per certo? Non avresti un video o foto? 🙏🙏🙏
I am not sure, I just remember so. The bike is not by me anymore, I cannot check it.
Good work!! Were did you order your spareparts from? I am going to do the same renovation on mine this spring!.
Thank you! I just simply ordered the parts from local Yamaha dealer.
Top work 👍
Thank you!
Szia! Mi a megfelelő szelephézag?
Szia, szívó 0.08-0.12 kipufogó 0.14-0.20mm.
i have the bike but how i fix the heat up
Bro it could be a lot of things ...
good
Szia, én is egy ilyen 1996-os kiadású, 250.4uc1 Motorkod motort rakok rendbe, egy gondom van hogy a hőfokjelző soha nem megy 80-90 fok körül, vagyis a műszer vízszintes vonaláig, a pedig forró, van szerviz leírások, és azt írja hogy a 12votlnak a szenzoron kell lennie, a gyertya felett van, na oda csak 4,7volt megy.. A műszerfalon alul a bekötés rendbe tisztitva.. Van ötleted? Köszi szépen.
Szia, a kijelző sokszor pontatlan. Én ki szoktam szerelni a termosztátot, beteszem egy kis fazék vízbe és melegítem. Hőmérővel mérem a víz hőfokát, ha a termosztát szemmel láthatóan kinyit kb 90 fokos víznél akkor jól működik.
Brilliant 😊
Thank you!
@@latzkoworks I have a 1996 majesty love it
The best scooter was made in the 90's.
Excelente
Obrigado.
Szia. Fel tudnálak hívni valamikor?
Szia, írj ide: latzkoworks@gmail.com
Does anyone know where to find the fuse box on one of these?!
Szia.Hol tudom beszerezni a yamaha 250 karburátor felújitó készlettet és egyéb alkatrészeket?Válaszodat köszönöm.Üdvözlettel Ferenc
Szervusz, én Győrben vettem a Yamaha márkakereskedésben, a csomagolásokon látszik a gyári cikkszám.
@@latzkoworks Nagyon szépen köszönöm.
Prima !
Az orszag melyik megyejeben dolgozol ?
Kerdi egy WR250 es egy Majesty 250 tulaj. :)
Szia, Sopronban.
@@latzkoworks
Koszonom az informaciot !
BONJOUR COMMENT JE PEUX REGLER MES 2 CULBUTEUR DE MON SCOOTER YAMAHA MAJESTY 125
Boss pa rescue din ng majesty ko.
من اين احصل على قطع غيار ماجستا وكاله ؟
Perfekt erklärt. 👍👍👍
Schönen Dank!