Shockwave Groundplane Antenna 5/8 Final Tune Report

Поділитися
Вставка
  • Опубліковано 5 вер 2024

КОМЕНТАРІ • 19

  • @WinZard
    @WinZard 5 років тому +44

    shouldn't he have measured/tuned from the feed point of the antenna?

    • @Rooster_Radio
      @Rooster_Radio  5 років тому

      WinZard a properly tuned antennas tune will not change from the feed point or from the end of the coax

  • @randyroubal8916
    @randyroubal8916 6 років тому

    I have the I-10-K Intercepter 5/8's wave antenna from Jay in the Mojave, looks just like this one and was the first made by Steve! I have had it up for 10 years now and it still has a flat match on it and it withstands the wind really great up here in the Mojave Desert, Frost is no problem either, the antenna still looks brand new & it really hears and talks great. I'm running a RCI 2995 DX CF radio and use the Ameritron AL 1200 Amp & the set up works great.

  • @flash001USA
    @flash001USA 4 роки тому

    Hopefully you see this message. Let me ask you about the bandwidth. What kind of reasonable bandwidth should you expect above and below the center tuned frequency provided the antenna is in a decent location with little to no obstructions?

  • @shaneshane-ko8zz
    @shaneshane-ko8zz 3 роки тому

    Are you still selling the shock waves

  • @justinruth9729
    @justinruth9729 Рік тому

    How would u compare the shockwave to the supper penetrator 500 ..vice versa

  • @dietrichzumwald4777
    @dietrichzumwald4777 7 років тому +1

    What are the measurements of the trombone tuning? How long are they and how wide are they apart? The video is sort of deceiving in the respect. I can't really tell if it's 3inches wide or 4 inches wide and looks to be about 4 feet long or so. Although there are 3 measurements in trombone length, top, middle and bottom.
    Keep up the good work Rekindling The Reformation !!

  • @aerialheights5680
    @aerialheights5680 6 років тому

    52Ω *IS* perfect, 50Ω is merely the industry rounding it down to an easy number.

  • @georgebishop2530
    @georgebishop2530 3 роки тому

    What’s the measurement for top section. Tuning for ch 28 if it makes a difference.

  • @WeaponsAcademy
    @WeaponsAcademy 8 років тому

    how broadbanded is it? Can it hold SWR through 11 and 10 meters? I'm looking at this to replace an Imax2000 on 135ft tower. Looks like a beast! How do you think it would measure up against the Imax at that height? Thank you for the videos.....Tim

    • @Rooster_Radio
      @Rooster_Radio  8 років тому +4

      it will tune go across regular 40 and a bit above and below. You would probably need to tune specifically for 10 meters or run a tuner. Performance wise the shockwave like most well made aluminum antennas will outperform an imax, which is basically a piece of wire coated in fiberglass

  • @outlawhead
    @outlawhead 7 років тому +1

    i want to see the full band width ?

  • @timsmith1029
    @timsmith1029 4 роки тому

    You still running this Rooster? What kind of time frame to NY if I buy one?
    Thanks,
    5Zero1 NY 👋👋👋

    • @Rooster_Radio
      @Rooster_Radio  4 роки тому +1

      I'd still have one, but I don't sell them anymore. I've heard the wait time is anywhere from 2 weeks to 6 months. Good luck to you.

  • @rogerlawson4516
    @rogerlawson4516 3 роки тому

    Anyone know the db gain on this antenna. Thanks.

  • @jmanranger7271
    @jmanranger7271 2 роки тому

    Just another ground plane

    • @Rooster_Radio
      @Rooster_Radio  2 роки тому

      Do you need some attention? That's two comments from you on a video that's several years old