Thank you sa pag gawa ng video na eto. Talagang pangit yang motor ng mga 405/455 series na panasonic/kdk. Pag mga bibili ng bago na kdk/panasonic talaga dapat 40/45 na model. Kung inverter habol pwede na ren ung 409/459
Kung ako may ganyan lodicakes hanap talaga ako ng motor ng decapitated na camel tas lagay ko yung motor sa mismong 405 na efan tas lagyan ko ng motor cover pang Panasonic or KDK na Old model
BTW, you also try to replace the Bushings into Ball Bearing type especially when used in Commercial Establishments. 8mm(Inner Diameter) x 28mm(Outer Diameter) x 9mm(Width) Ball Bearings or Code 638 ZZ(metal cover) or RS(rubber seal) will fit to the Bushing Holder if the Motor Housing is Made out of Aluminum and check the depth of the Bushing Holder if it is Deep.
Idol,nagbukas aq nyn npasama ung cover nyang white nhugot ung wire sa luob my pg asa pba un bka my vodeo kyo pno ikabit ung nputol na wire same electrcpan po sia
Kuya gelo alam ko na may na isip ko na imbis na pwede tumapon yung fan na ito po pwedeng pa replace yung motor lang kagaya tanggalin yung motor na nidec at palagyan ng bagong motor na malakas at matagal na tibay kagaya standard,asahi,camel,union,dowell at iba pang motor na malakas at matibay kase pwedeng pa gamitin yon pag nawala ng ikot ng nidec pwedeng tanggalin at lagyan ng bagong motor na malakas at matibay
Inde naren matibay ang standard ngayon. Malapit na ganto naren halos iyon. Ang okay ung ibang sinabi mo at ung mga motor na open ng kdk ok paren den iyon.
Grabe talaga Fake motor ang nidek e kapag ilang buawn Sira na kaagad Hindi matibay e Masmaganda sana kung yung Matsushita motor matibay pa yun masmatagal
Never ever buy KDK/Panasonic Fans with Short Motors or known as NIDEC AC Motors. KDK uses Camel, PTC and NIDEC(AC and DC) Motors. They are the WORST Fan Motors in the Industry even worst than Cheap Fans. Bushings are Prone to stuck up a short period of time and Replacing it is a Pain. Windings are made out of Aluminum that can easily punctured due to the proximity of windings to the holes in the front. and it cannot be rewind due to its arrangement and the stator is pressed together by the Front Cover. Motor Cover is pressed by tabs instead of screws and the first models have permanent rivets. They literally Scam customers because they think that "Oh KDK and Panasonic Fans are good, durable and can last longer" but they are wrong because this motor drops their reputation and quality like a heavy stone. It is also Expensive compared to other brands. Even more ridiculous is that they loaded it with 18" Metal Blades also which further stresses the motor especially bushings. But in Overseas they use the Old Motors with Brass Bushings with Oil Ports or Ball Bearings. KDK/Panasonic is Made by KIPCOL or KDK Philippines Corporation which is Joint Venture between KDK(40%) AND AVESCO(60%) because we have a law called 60/40 in the 1987 Constitution(Art.12 Sec.10) in which Foreign Companies like KDK must have a Filipino Partner. This same applies to Former Tatung(Standard), Mitsubishi(3D) and Hitachi(Union). That's why we have Different Models than Overseas.
Thank you sa pag gawa ng video na eto. Talagang pangit yang motor ng mga 405/455 series na panasonic/kdk. Pag mga bibili ng bago na kdk/panasonic talaga dapat 40/45 na model. Kung inverter habol pwede na ren ung 409/459
Kaya idol.. Sana hindi na bilin nga mga tao yung electric fan na yan. Sayang Lang kc ang Mahal naman
Wow new video
Thanks friend for sharing it :-)
Panasonic
Welcome friend.. pinapanuod din Kita friend nice..
Ok 👍🏻
A friend so subscribe ka sa channel ko ayus yun OK lang
May kdk sf40v-cb 2018 variant may nidec motor minsan
First comment :D
Talaga pangit ang nidek motor
Totoo yun
A sige friend papagawa na ako ng national stand fan
Sa agusto sana e
Ok friend
@@kennethramirez5569 ok 👍🏻
Magkano yun kung pwede sana mga 600 pesos friend
Blue blade sige kahit ano color friend bye
@@superlan2men204 hello
Kung ako may ganyan lodicakes hanap talaga ako ng motor ng decapitated na camel tas lagay ko yung motor sa mismong 405 na efan tas lagyan ko ng motor cover pang Panasonic or KDK na Old model
Pwede lodi. Papalitan mo Ng ibang electric fan yung ulo nia.. tama ka jan lodi..
Panasonic Stand Fan Repair
parekoy musta na,.. nice content pre,..
Salamat pre... Ayus lang naman kahit pandemic dito .. nakaka rao's din Ikaw pre. Musta.,,??
BTW, you also try to replace the Bushings into Ball Bearing type especially when used in Commercial Establishments.
8mm(Inner Diameter) x 28mm(Outer Diameter) x 9mm(Width) Ball Bearings or Code 638 ZZ(metal cover) or RS(rubber seal) will fit to the Bushing Holder if the Motor Housing is Made out of Aluminum and check the depth of the Bushing Holder if it is Deep.
Gud pm mga boss. San po loc nyo? Baka pwd makabili ng shaft ng panasonic?
Idol,nagbukas aq nyn npasama ung cover nyang white nhugot ung wire sa luob my pg asa pba un bka my vodeo kyo pno ikabit ung nputol na wire same electrcpan po sia
Pwede po sir maikabit iyan o hinangin pero kung marami na po yung naputol mahirap na po siyang hanapin kung ano po yung 1 2 3 saka yung linya
Grabe po talaga nakita ko parang 3 agad pinagawa na ganyan dyan. Di po talaga matibay.
Oo idol sayang lang ang pera mo dito . Gagastos ka talaga . Pag pinagawa mo pa saka hindi xa tatagal2
@@gelomoto4581 Basura Talaga Ang Nidec AC Motor Kasi Disposable
Oo idol.. Mahal pa Pag bibili mo
ua-cam.com/video/XB9R9kguKos/v-deo.html
Sa Indonesia pinalitan nila ng Bearing ang ganyang motor.
Sa Cosmos naman sa kanila may NIDEC AC Motor.
Salamat idol l . Sa edia sa Pag pasa ng link
Kuya gelo alam ko na may na isip ko na imbis na pwede tumapon yung fan na ito po pwedeng pa replace yung motor lang kagaya tanggalin yung motor na nidec at palagyan ng bagong motor na malakas at matagal na tibay kagaya standard,asahi,camel,union,dowell at iba pang motor na malakas at matibay kase pwedeng pa gamitin yon pag nawala ng ikot ng nidec pwedeng tanggalin at lagyan ng bagong motor na malakas at matibay
Inde naren matibay ang standard ngayon. Malapit na ganto naren halos iyon. Ang okay ung ibang sinabi mo at ung mga motor na open ng kdk ok paren den iyon.
Tama kayo idol pwede natin ilipat sa ibang electric fan.. salamat idol
Idol may mga ok pa namn na pwedeng bilin na matitibay. Na electric fan. Wag lang yung mga lata. Tulad nito ...
San po nakakabili ng power adaptor ng panasonic dc fan?
Sa recto sir marami po dun Dalin nio po yung sampol..
Panasonic bago na ang motor nya kasi dati hindi po sya nagawa hirap hanapin ang piyesa pangit na ang motor nya thank you hahahah
Tama ka idol .. salamat idol
San po shop nyo
1040 del monte Quezon city..
Some models ng Electric Fan na madaling ipagawa ay gawa ng Camel at P.T.C at yung mga models na yun na mahirap ipagawa ay gawa ng Nidec.
Tama ka idol .. Sana maraming maka intindi nlng mga videos natin para hind na sila bumili nito
And KDK making the same model
Oo idol..
I hindi ako marunong yan
Grabe talaga
Fake motor ang nidek e kapag ilang buawn
Sira na kaagad Hindi matibay e
Masmaganda sana kung yung Matsushita motor matibay pa yun masmatagal
Tama ka friend.. talagang ginagawa na Nila yung electric fan na Pag nasira tapus na tapus bibili ka nanaman...
Kailangan
Palit motor bushing shafting e
Maraming gasto friend
Cge friend gagawa tayo nun..
Never ever buy KDK/Panasonic Fans with Short Motors or known as NIDEC AC Motors.
KDK uses Camel, PTC and NIDEC(AC and DC) Motors.
They are the WORST Fan Motors in the Industry even worst than Cheap Fans.
Bushings are Prone to stuck up a short period of time and Replacing it is a Pain.
Windings are made out of Aluminum that can easily punctured due to the proximity of windings to the holes in the front. and it cannot be rewind due to its arrangement and the stator is pressed together by the Front Cover.
Motor Cover is pressed by tabs instead of screws and the first models have permanent rivets.
They literally Scam customers because they think that "Oh KDK and Panasonic Fans are good, durable and can last longer" but they are wrong because this motor drops their reputation and quality like a heavy stone.
It is also Expensive compared to other brands.
Even more ridiculous is that they loaded it with 18" Metal Blades also which further stresses the motor especially bushings.
But in Overseas they use the Old Motors with Brass Bushings with Oil Ports or Ball Bearings.
KDK/Panasonic is Made by KIPCOL or KDK Philippines Corporation which is Joint Venture between KDK(40%) AND AVESCO(60%) because we have a law called 60/40 in the 1987 Constitution(Art.12 Sec.10) in which Foreign Companies like KDK must have a Filipino Partner.
This same applies to Former Tatung(Standard), Mitsubishi(3D) and Hitachi(Union).
That's why we have Different Models than Overseas.