Plastering Walls With Sand Cement short PLASTERING TUTORIAL STUCCO SAND & CEMENT PLASTERING

Поділитися
Вставка
  • Опубліковано 16 вер 2024
  • plastering concrete block / brick wall with sand and cement aka stucco ready for the skimming plaster to finish it off, This is the undercoat for the top coat of finishing plaster gypsum for skimming #render #sandandcement #plastering
    HOW TO RENDER SAND AND CEMENT A WALL READY FOR PLASTER OR TILES ON AN OLD WALL
    Hi everyone this is a video in which I show you a lot of tips on how to go about re rendering an old dusty wall that had loose plaster on it covering the basics and the must dos and don'ts this demo could help the diyer a lot or even a homeowner understand what must be done.
    If the video helped or you just like watching plastering be sure to thumbs up and mac scribe for more mac attacks :):)
    Spear and Jackson bucket trowel that is still going strong for me after many years = amzn.to/2pcpReS
    The pointsman hawk = amzn.to/2O1nKmp
    Refina trowel pack and holder = amzn.to/33PbCvi
    microphones used =
    USB Microphone MAONO = amzn.to/2MQLJnK
    Lavalier = amzn.to/33He7iR
    Blue Microphones Snowball Microphone - Black = amzn.to/2P0OINg
    camera used = amzn.to/34Nx8AX
    All amazon links are affiliated links will cost no extra to buy from but we might get a %
    tools links direct
    www.refina.co.uk/
    How to sand and cement render concrete block wall 1st coat scratch coat DIY
    • How to sand and cement...
    Find us and like us here
    / macplasterin. .
    Tweet us here
    / macplastering
    / macplasteringservices
    our amazon store affiliate www.amazon.co....
    n the video I use a lot of tools I use the refina mega mixer to make the sand and cement in the large 40 liter refina tube I use a refina trowel with a pointsman hawk to apply the render an aluminum straight edge or know as a refina feather edge and a 1200mm speedskim on my skimming to get the wall straight and ready to be floated. Then I just use a float to rub it up which has nails though it to give a key for the next coat or tiles.

КОМЕНТАРІ • 34

  • @rayot6579
    @rayot6579 6 днів тому +1

    Cheers mac going to have a go plastering the back of the shed the weekend you make it look easy

    • @macplastering
      @macplastering  6 днів тому

      What type of finish are you going for mate it gets easier as time goes by but still hard old work for sure

    • @rayot6579
      @rayot6579 5 днів тому +1

      @@macplastering thanks for replying I’m down in Wexford here I done a self build over 4 years in a year now ,I’m going white sand cement and a shovel of lime,what about plastering onto mass concrete walls will I put thistlebond on first before scutting
      I had no problem getting men during Covid hard to get any trades people now I’ve a lot of mass concrete walls around the house don’t know to plaster them or just grow Ivy up them

    • @macplastering
      @macplastering  4 дні тому

      Are the garden walls ? up here if block is fresh we can 1st coat straight on to them after wetting down some Just uploaded a video on the chimney top 1st coat might be of interest ?

  • @joseeduardobarrundia332
    @joseeduardobarrundia332 3 місяці тому +1

    Este es un verdadero plaster se le nota en el manejo de la herramienta

  • @indisugartaufik
    @indisugartaufik Рік тому +1

    Great work as always! 😊

    • @macplastering
      @macplastering  Рік тому

      Thank you my friend hope your doing well

    • @macplastering
      @macplastering  Рік тому

      A few new videos coming live should be a nice watch :) This Sunday and next :)

  • @TeeTee-zm2re
    @TeeTee-zm2re Рік тому +1

    Need to get me one of those feather edgers

    • @macplastering
      @macplastering  Рік тому

      find them great for the bases outside helps set it of some

  • @alabinibop
    @alabinibop Рік тому +1

    Made short work of that mate. Was that just a 4-1 with plasticiser?

    • @macplastering
      @macplastering  Рік тому +1

      It was mate a little stiff but OK for this we wall

    • @macplastering
      @macplastering  Рік тому

      A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet

  • @Smith-os1ho
    @Smith-os1ho Рік тому +1

    What your go to trowel, any preference

    • @macplastering
      @macplastering  Рік тому

      Refina on the most mate

    • @macplastering
      @macplastering  Рік тому

      A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet

  • @ianturner8459
    @ianturner8459 Рік тому +1

    What feather edge you using there Mac?

    • @macplastering
      @macplastering  Рік тому +1

      Nuce refuna mate new so light and sharp

    • @macplastering
      @macplastering  Рік тому

      A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet

  • @Frankieee-bj6nu
    @Frankieee-bj6nu Рік тому +1

    Whats the refina trowls like mate do they take alot to break in?

    • @macplastering
      @macplastering  Рік тому

      Can take a few weeks floating but when broken in I wouldn't leave the house without it =]

    • @Frankieee-bj6nu
      @Frankieee-bj6nu Рік тому +1

      @@macplastering are they stiff mate or have they got abit flex in the blade ? I tried one of them nela trowls but it was like using a brick

    • @macplastering
      @macplastering  Рік тому

      @@Frankieee-bj6nu stiff enough and then they do have a more flexi it's good to I like a solid one for coating and 1st 2nd trowel then suoerflex

    • @Frankieee-bj6nu
      @Frankieee-bj6nu Рік тому +1

      @@macplastering I’ll give one a try cheers bud what size is the one your using in the video ?

    • @macplastering
      @macplastering  Рік тому

      @@Frankieee-bj6nu think it's 14

  • @sabkhan8347
    @sabkhan8347 Рік тому

    how much per room do plasters charge please standard room 4 meters

  • @lochocost
    @lochocost Рік тому +1

    так собі майстер...