DIY 40AH 12V 32650 LiFePO4 Battery Bank For Solar Power
Вставка
- Опубліковано 12 вер 2024
- DIY 32650 Lithium Iron Phosphate Battery For Back-up Power or Solar Power System
List of Materials
1. LiFePO4 32650 Battery
shopee.ph/3265...
2. Nickel Tab Wire
shopee.ph/Nick...
3. Battery Holder/Spacer
shopee.ph/Batt...
4. Screw
shopee.ph/Scre...
5. BMS (Battery Management System)
shopee.ph/%E3%...
6. DC-AC 220V Inverter
shopee.ph/1200...
7. Fork Terminal Cable Lugs SNB 2.5
shopee.ph/fork...
If you enjoyed watching the video or find it useful please hit LIKE & SUBSCRIBE for more simple Electrical & Mechanical DIY videos.
THANKS!!!
Its better to top or bottom balance. Trying to balance with batteries at 3.2V mid range isn't very effective. Better to test each battery individually for internal resistance first, and leave them at top charge, then top balance together.
From where will we get the same BMS?
So cool! 👏What are the screw / nuts on these batteries called? I’ve been trying to find out.
48ah 500w nice build..
Sir may lists po kayo nang mga materials na ginamit at costing na rin.. Salamat napakadaling sundan ng vid
I leave mine in parallel for about a month. Before the build.
Just add a slight charge to the whole pack in parallel. The influx of current expedites the balancing.
s ilang volts u po chinarge yan para s pagbabalance ng battery po
Thank you for sharing. Can I use this to our Mitsubishi G4 car? What kind of active balancer I will use? Thanks
Good job brother. Nice sharing.
You need to apply a charge current (or discharge current) so they balance at either 2.50V or 3.65V. Anywhere in the middle is useless and does not properly balance the energy
Pwede din ba cya gamitin as jump starter ng sasakyan?
Dpende sa bms kung iln ung max current output
Mga idol Tanong lang po, kaya po ba ng inventer Yan Kasi Diba Ang maximum voltage niyan ay 14.4 tapos Ang inventer ay 12 volts?
How to charger back battery??
Sir ask for question regarding your diy what bms compatible you use 45ah 12volts 4s9p thank you..
kaya po ba nito ang 1hp aircon? or inverter ref?
Sir sinunuod ko po tutorial nyo. Pero me tanong po ako about sa charging. Same lang ba sila ng wire for discharge and charging? Great vid pala. Natuto ako sayo!
Magkaiba ang negative terminal ng charging saka load diyan sa ginamit ko. Meron din bms na same lang ang terminal ng charging saka load; Mas convinient gamitin.
Tanong lang po ilang battery po kailangan para maka buo po ng 12v 60ah na battery pack? Salamat po
If 5ah bawat battery so 48 batteries
Hot is the work of BMS
How much backup it gives fir a load of 300 watts with an inverter
300watt Does your television with inverter work with your battery
Ano po pala size ng Wire from batt to inverter sir? At yung specs ng insulated ring terminal wire na needed, Maraming salamat po.
Same placement rin po ba balancing leads if gagawin kong 4s10p?
Yes sir.
@@thewrecknician3407 thanks po boss
I think the thin blue wire from the BMS to the cells should be a thick wire.
I already replaced it. Can't find a thick wire when i tested it.
Hello please what battery will I need to run this inverter Growatt 48V 5000 Watt Inverter 220V Inverter Charger Max PV Input Voltage 450V MPPT 100A Hybrid Solar Inverter SPF 5000TL HVM-WPV-P
A battery with a continuous discharge of 5000W minimum but realistically you'd probably want to double that. so 10,000W/3.2V nominal=3125Ah at 3.2V nominal or 781Ah at 12.8V
This would be for your standard 1C continuous discharge max LiFePO4 cell. If you are using a power cell that can easily do 2C then 390Ah 12V battery.
Just depends on the voltage of your battery. Take the wattage/voltage of battery (nominal) and that equals the number of amps you need....for a 1C battery that will also be the number of amp hours in the pack.
Is it ok to using the battery with the bms? Or only use the bms when charging pls repy
Both for charging and discharging.
Diagram dw sir 4s4p? Or same pang na ganyan?
4s8p boss
Nice one. Anu editor mo kuya? Hahaha
Sir. applicable din ba ung vid nio sa 4s10p?? pati ung BMS nio? ubra din kaya sa ganing configuration? o need ng mas mataas na bms?
Pwede sa 10p sir. Yung size ng bms depende sa load.
Pinapahirapan mo naman ang na nunuod sayo ang iksi naman ng paliwanag pwede na pvc.
Maximum rated power is watt?
Is it too heavy to carry on back?
No sir
make a charger video for this battery pack
Sir pang noob na tanong. Kung me charge controller ba, yang red and black din ang isaksak doon sa charge controller?
Sa ganyang BMS may separate na terminal po yung negative. Same terminal para sa positive ng charging. Meron ding BMS na same yung terminal para sa charging at load.
@@thewrecknician3407 Sir OK lang po ba isaksak ko to sa SNADI inverter? yang red and black? or me ma recommend po kayong other BMS na pwede sa AC charge from SNADI. Salamat!
Pwde ba kahit nasa kabilang dulo yung wire pa puntang inverter?
Like yubg wires ng nasa bms nasa left side dulo
Tapos yung wire papuntang inverter nasa kabilang dulo right side?
Yung red ba saka blue? Pwede po sir.
do you have pattern or connection t,y
how did you know its a 40ah pack???? 32650 has a capacity of 6amps.... 6x12 that would be 72amps right?
8 x 4 = 48ah but I think it's 5 ah because it is used cells.
Sir pwede ba yan sa solar charge controller instead na inverter?
Kung sa charging ng battery ang tinutukoy nyo para sa solar kailangan po sir may charge controller. Kung AC ang load mo kailangan mo pa rin ng inverter.
hi sir...specs po ng panel pang charge sa ganyan na setup? thanks
200 watts panel much better
Ganda po ng vids. ilang meters ung tabbing wire po?
Nasa 2 meters boss.
salamats po. ganyan gagawin ko sir. inspired sa gawa mo malinis pulido at maganda po. pwede b yan lagyan sir ng active balancer? newbie here. sana my link para matignan ko po
madalas po kc nag brownout dito samin sa bicol nadaanan ng bagyo. pang charge cp at kunting 12v na ilaw sir. salamat po
Pwede boss. Mas ok yan.
150w mono panel pwede po jan? my 30A mppt na SCC n po ako e
No need na po ba ng charge controller?
Cc cv for charging
Hello Sir may FB ba kayo na pwede po mapagTanungan? ☺️
If walang solar panel . Anu pwde pang charge sir ? Nice vid!
shopee.ph/product/45615974/2351623477?smtt=0.82184199-1605416473.9
Pwede po ba ung charger ng car battery gamitin pang charge nito sir?
Boos kapag 4s10p tas snadi pure sine wave 1k tas load ko sa snadi 150 watts ilang oras tatagal ung 4s10p 32650?
4 hours.
Boss pahinga ng diagram ng wiring ng bms
Your negative from BMS to battery is wrong gauge, fix that before catching fire :D
Replaced already. Thanks. Used it only for testing.
sir how many batteries for 1.5kw? can be same bms?
Minimum 52 batterries. Use 200A BMS.
kailangan pa po ng fuse po pag200am bms sir?
Meron dapat palagi yan ng fuse or circuit breaker.
How much sir ?
Ano pong gamit pwede dito.aside from lights po?
kailangan po ng 12v na charge controller kung solar.
150 watt minimum.
pwede electric fan at ibang AC appliances basta pasok sa specs ng inverter.
@@thewrecknician3407 salamat pp
Brother how to charge it
Hello.. 4s13p set up ko sir.. tanung ko po ung bms na nakalagay na 100Amps sa description ok lang sa set up ko??
Ok lang yan. Wag lang lalagpas ng 1200 watts ang load mo.
@@thewrecknician3407 thank you
@@thewrecknician3407 Sir newbie lang po, pano po malaman ang restriction ng bms sa load, 12v x 100A po ba? =1200 load restriction.
Yes sir. Watts law. Pero yung operating capacity should be lower than the manufacturer's specs.
@@thewrecknician3407 Salamat po
Anong bms gamit mo boss ilan ampere po? Tnx
100A Continuous Discharge Current
10A Charging Current
Nasa description po sa taas ang link ng BMS
How to charge?
Ilang watts po yung solar panel pwede po dyan?
Dpnde sa application
Ano po positive negative side sa video
Pulang wire - positive. Itim - negative.
do you have a link for buying the cells and material ? Thanks Helmar
i have included it in the description above
How to connect to solar panel.?
Kailangan may solar charge controler merun don para sa battery
Ilang ah po to ganito set up sir?
40
Ano pong specs ng bms gamit nyo?
Nasa description boss
Ir anong dapat bilhin b1 b2?
B1
sir paano po ang charging ng mga batteries
Gamit ka SCC.
Kaya ba computer sa ganyang setup?
Kaya naman boss. Mahigit 2 hrs nga lang.
@@thewrecknician3407 100 ah future set up ko so tatagal siguro ro ng 6hrs?
@@lawabriza7099 dpnde sa wattage and dod setting na gusto mo
Pano po siya i charge?
Solar charge controller for solar. For back-up power, 12v LiFePO4 battery charger.
Sir para saan po yung alambre?
Saang parte boss? Anong time sa vid?
@@thewrecknician3407 nasa 1:32 po sir
Binalatan na wire yan sir. Pang connect lang ng terminals para sa balancing.
@@thewrecknician3407 ahh I see. Thank you po
@@thewrecknician3407 sir pde pla un 1860 ung bms 32650 batt mo
Backup time?
Depends on your load.
Anu po diagram ning bms?
shopee.ph/product/176352524/7914519424?smtt=0.82184199-1605417941.9
Sir ilan n po AH yan ginawa nio ?
Nka lagay po sa video nya 40 ah yata
Diagram sir plss thank you
бля, а где силовой минусовой провод на батарею
Negative will be on the BMS
Dislike for background music
Make ur own vid
Sir ilang Ah po per piece ng battery?
5ah boss