Another LS Conversion!? || L98 80 Series || Episode 1

Поділитися
Вставка
  • Опубліковано 6 кві 2022
  • We start on yet another conversion. This time a 6L L98 LS into this 80 Series, along with some other fruity upgrades!
    #LStheWorld #Landcruiser #80Series
    Become a channel member! / @boostgumps
    Get a Discount On Your DRAGY! Use code "BOOSTGUMPS" - dragymotorsports.com/?rfsn=62...
    Merch! - www.boostgumps.com/
    Work! - www.onsongperformance.com/
    Parts! - www.ospwarehouse.com/
    !!**SUBSCRIBE**!!
    !!**SUBSCRIBE**!!
    !!**SUBSCRIBE**!!
    Follow us!!
    INSTAGRAM
    - boostgumps
    - onsong_performance
    FACEBOOK
    - onsong performance
    TIKTOK
    - boostgumps
  • Авто та транспорт

КОМЕНТАРІ • 23

  • @grahamerosewarne6656
    @grahamerosewarne6656 2 роки тому +4

    That's a nice 80 series Land cruiser. The 6 litre will make a big difference. That cam is to big for that. Will lose a bit of power down low. Always awesome content Max and Rex. 😂💯👏👍

  • @mrsabidji
    @mrsabidji 2 роки тому +2

    That's going to be an interesting build to follow. Thanks for sharing. 😎

  • @nickgrech9634
    @nickgrech9634 2 роки тому +2

    What a rig!

  • @zackerywilliams9803
    @zackerywilliams9803 2 роки тому +1

    I swear I watch your guys' channel a bit and every couple of days recently there's been a new project you guys must be swamped

  • @geoffodger
    @geoffodger 2 роки тому +2

    Love the content great vid

  • @kylefulton4356
    @kylefulton4356 2 роки тому +3

    Ls swap the excavator next

  • @nickgwiazda1212
    @nickgwiazda1212 2 роки тому +3

    Love the engine crane 🤣🤣👌

    • @BoostGumps
      @BoostGumps  2 роки тому

      Shes a bloody good one that one haha

  • @Derek8888
    @Derek8888 10 місяців тому

    So much knowledge

  • @thomaslapointe4671
    @thomaslapointe4671 Рік тому

    Great Content ~ I've also had Fun Studying LS Cams for Low End thru Mid Range Torque without "Chasing" unusable HP" in the Top of the RPM
    Leaning toward a BTR 4" Stroke Rec Port Heads 219/239 115lsa for a 416 (LS7 Stroked) 6.2 LS3 w 6L80 TuTd in an triple locked 96 Land Cruiser
    A heavy LS7 OEM Crank (rotating) w lightweight Pankl Titanium Rods w Mahle 11.1 (ricprocating) LS3 heads w LS7 exhuast manifold, cats, 3" Npp hopes to optimize NA Trottle Response & Torque @ 1500rpm ~ 6500 😎
    5 year Cancer Survivor ~ Bucket List
    Ultimate Bow Hunting travel LC

  • @KiyaWarrior
    @KiyaWarrior Рік тому +1

    Could you do this exact series again but as a full in-depth guide instead detailing every step including pulling the motor? I know its a big ask but I'd love to do this one day to my vehicle.

  • @kanesaw7456
    @kanesaw7456 2 роки тому

    Wish u boys was in WA. Would of sent my cruiser to u fellas for a conversion.

  • @bustedrusted7385
    @bustedrusted7385 2 роки тому

    80 series marks kit does definitely uses the ls flexplate
    Btw i posted this before you confirmed it in the video haha
    Sent rex some pics

  • @ThePepperford
    @ThePepperford 2 роки тому

    Turbo the 4.5 or ls swap? Benefits costs?

  • @catmogguy
    @catmogguy Рік тому

    1FZ twin turbo👍

  • @braedenhansen6269
    @braedenhansen6269 Рік тому

    Where’s your shop..? I’m wanting to put an Ls2 in my triton

  • @nickgrech9634
    @nickgrech9634 2 роки тому +1

    FYI TongYang make alot of oem quality aftermarket parts (quarter panels and fans etc) not too sure this thermal will go in the setup though

    • @nickgrech9634
      @nickgrech9634 2 роки тому

      how this thermo*

    • @BoostGumps
      @BoostGumps  2 роки тому

      Good to know! Pretty happy to give them a crack

  • @keilfestin4606
    @keilfestin4606 Рік тому

    How much drive in drive out for LS patrol

  • @theviolator2.030
    @theviolator2.030 2 роки тому

    Should of used a Mazda 3 engine. Bolts straight in, no mods.

  • @JFWGarage
    @JFWGarage 2 роки тому

    Kingbarra ?

    • @BoostGumps
      @BoostGumps  2 роки тому

      Its coming! Just needed to get a few of these conversion underway to make some room in the shed again haha