Amazing. And for the people asking about paint i advise you with this: - Use any regular paint, thin it down with proper thinner ( water, etc... ). Aclicic can be used also, thinned down. Water based diluted pigments works amazingly to. 👌
Normally one uses emulsion paints or plastic paint to spray. I guess an artist could look at using watery paint or thinned down paint with this spray gun....
Cool. I did this very exact thing to dump leftover WD-40 into, because I had about a dozen WD-40 cans that always run out of propellant with about a quarter can of product left inside. Now I pop a hole in the can and dump it into the spray bottle, works great.
Maybe a little late on this , but I'll give you a better way to get all the WD-40 out without puncturing can and transferring... Cut the valve stem off an old bike tube , remove the spray cap off of your can of WD-40 and use the valve stem in place of it (kinda like an adapter) to pump in some air with an air compressor. This will allow you to get all the WD-40 to spray like normal. Just don't go crazy with the air pressure when refilling the can.(common sense I hope) I don't go over 90psi and never had any problems. I've refilled all kinds of spray cans over the years like WD-40, PB blaster, glass cleaner, etc. Works like a charm! If my instructions weren't clear, there are several videos here on UA-cam that show you how it's done.
सबसे अच्छी बात यह लगी कि आपने जो उपकरण बनाया उसकी कमेंट्री नहीं की ,नहीं तो बहुत से वीडियो बनाने वाले कमेंट्री कर करके पका देते हैं, आपने छोटे में ही बहुत सिखा दिया ,अब चाहे पेंट ना भी हो इसमें हम लिक्विड कीटनाशक भरकर कमरे में HIT की तरह प्रयोग कर सकते हैं 👍
Hi nice idea, I guess the failure mode is that the bottle cracks around the hole for the cycle valve? If that's the case try lightly melting the edge of the hole with a kitchen gas torch. Heating it just enough to smooth off the edges of the hole will help to stop it cracking and covering you with paint. Kind regards . . . Andy
Nice DIY. But Same more Convenient product available n used by petrol pump for window cleaning Its available in market at Rs 70 . Which has pumping and holding handle too.
i tried this but not enough pressure , so i hocked my air tank to it, well it work until it exploded ,but i had a instant paint job, my shop was now red. and me,
I am saving this video in a playlist, i will be attempting this in a couple days for my acrylic paint thinned with either dish soap or gesso. I will come back and tell you my results
Always use a bottle made for carbonated drinks because they are designed to endure that much pressure. A water or fruit juice bottle will explode with very little pressure
Great idea and there is room for improvement. If it is fitted with a small electric gas compressor, it will be constantly inflated and will not have to be pumped again and again.
I like your design. I'm a little surprised a pop bottle is adequate with air pressure and a thin plastic. Have you considered modifying an old fire extinguisher?
New subscriber. I guess you could make your own paint for the sprayer. You just buy regular paint and add paint Thinner to thin it out enough to go through the sprayer. Great video thanks for sharing
@@suoppsdn9751 but that spray can nozzle is designed to atomize solvent based paints. Water based paints will not atomize properly, unless of course your only goal is tagging something w graffiti.
С краской работать не будет,нужно выше середины приёмной трубки сделать отверстие ! Или троиник омывателя авто 90°х90°х45 -вход выход тройника прямые средняя часть 45° будет инжектор! С отверстием в трубке выше середины тоже будет работать!
If we start spraying paint and leave it for few minutes then the paint will stick inside the pipe or nozzle and the passage will be blocked as the pipe is very thin....
Amazing.
And for the people asking about paint i advise you with this:
- Use any regular paint, thin it down with proper thinner ( water, etc... ).
Aclicic can be used also, thinned down.
Water based diluted pigments works amazingly to.
👌
Normally one uses emulsion paints or plastic paint to spray. I guess an artist could look at using watery paint or thinned down paint with this spray gun....
I did this years ago
By the way good idea
m.ua-cam.com/video/_zeU-FDv0nw/v-deo.html#dialog
nice
The way you put that bike valve inside the bottle. Superb idea
That was intelligent !
magnet
My thoughts exactly
ua-cam.com/video/FgS7oM_A9QM/v-deo.html
Cool. I did this very exact thing to dump leftover WD-40 into, because I had about a dozen WD-40 cans that always run out of propellant with about a quarter can of product left inside. Now I pop a hole in the can and dump it into the spray bottle, works great.
Maybe a little late on this , but I'll give you a better way to get all the WD-40 out without puncturing can and transferring... Cut the valve stem off an old bike tube , remove the spray cap off of your can of WD-40 and use the valve stem in place of it (kinda like an adapter) to pump in some air with an air compressor. This will allow you to get all the WD-40 to spray like normal. Just don't go crazy with the air pressure when refilling the can.(common sense I hope) I don't go over 90psi and never had any problems. I've refilled all kinds of spray cans over the years like WD-40, PB blaster, glass cleaner, etc. Works like a charm!
If my instructions weren't clear, there are several videos here on UA-cam that show you how it's done.
The best thing in the video is.... You didn't pull it long unnecessarily.... 👍👍👍
ua-cam.com/video/L26RBoUX6BE/v-deo.html
ua-cam.com/video/FgS7oM_A9QM/v-deo.html
2:57 is the funniest part, like in Tintin's cartoons
सबसे अच्छी बात यह लगी कि आपने जो उपकरण बनाया उसकी कमेंट्री नहीं की ,नहीं तो बहुत से वीडियो बनाने वाले कमेंट्री कर करके पका देते हैं, आपने छोटे में ही बहुत सिखा दिया ,अब चाहे पेंट ना भी हो इसमें हम लिक्विड कीटनाशक भरकर कमरे में HIT की तरह प्रयोग कर सकते हैं 👍
Your threading the piece in trick at 2 minutes was worth a thumbs up alone.
The way you inserted the valve is super.. very good idea
Yes really, 3 times i repeatedly watched for the secret 😃
Hi nice idea, I guess the failure mode is that the bottle cracks around the hole for the cycle valve? If that's the case try lightly melting the edge of the hole with a kitchen gas torch. Heating it just enough to smooth off the edges of the hole will help to stop it cracking and covering you with paint. Kind regards . . . Andy
1:58 what a technic 👏👏
He has well explained the principles of spray paint with easy to understood by even simple or non engineering knowledge person
Nice DIY.
But Same more Convenient product available n used by petrol pump for window cleaning
Its available in market at Rs 70 . Which has pumping and holding handle too.
Please provide the link
i tried this but not enough pressure , so i hocked my air tank to it, well it work until it exploded ,but i had a instant paint job, my shop was now red. and me,
🤣🤣🤣
😆😆
🙂🙂
🤣🤣🤣
Great instruction. Thank you for the time and effort you took to make this video and share it with us. Greetings from Croatia.
I am saving this video in a playlist, i will be attempting this in a couple days for my acrylic paint thinned with either dish soap or gesso. I will come back and tell you my results
Great video, the bear foot caught me off guard , I laughed .
Kangaroo foot
ah ah ah! so funny
You just save me from buying expensive spray paints. Now I can make one. You are a God send. Thank you for sharing.
Always use a bottle made for carbonated drinks because they are designed to endure that much pressure. A water or fruit juice bottle will explode with very little pressure
Once you start cutting holes in it, throw any "designed endurance" out the window.
CSD bottles
ua-cam.com/video/L26RBoUX6BE/v-deo.html
Great idea and there is room for improvement. If it is fitted with a small electric gas compressor, it will be constantly inflated and will not have to be pumped again and again.
This is really a great idea! Thanks Boss.
Bed idea.
@@everythingispossible6484 Bad spelling too🙄
Very nice, cheapest and useful. Tq v much.👍👍
idea is very useful for water based colour spray, nozzle May vary for paint products.
Kaninang ginto.
hey you made it through 2020! at the end of this vid i finally get the message! haha!.
Why am I feeling the need for weed watching this
Bong
Watching fr Jamaica with a big splif (weed) n a cup of tea
Let's have it after all cures corona. Wish very soon all gov approve this shit.
I think everyone must have this at home. A very simple and useful invention
Hmm, what to do, buy sprite bottle, tire valve, spray nozzle, tire pump, and paint. Or you know like just buy a thing of spray paint for a dollar
@Frank Olivieri or for a good Pantone colors that are copyrighted 😏
Wow bro interesting
@02:11 love the trick to bring the valve right into the hole !!
Good for garden .nice
You can thin your paint with paint thinner if it's to thick. I use cheap detail gun sucks cleaning it.
if you want to thin paint, add gasoline
Brilliant idea for SpaceX projects to save money 🤑😝😝😝
Dude, this is amazing. Thank you so much!
Nice
Spray paint. When they use an example water. So it's water spray not spray paint.
Its very interesting
Excellent i like it
I thought it was a water bong when i first saw it ✌️
Good job...nice tricks and tips for DIY ...EFFECTIVE SPRAY...
i love this...spray paint is so much expensive,...just buy ordinary paint and mix it up,...i can now DIY painting my stuffs...thaaaankksss
دمتگرم واقعا ابتکارت عالی بود. زنده وسربلند باشی
how you got the bicycle valve in position - marvelous 👍
WOW !!!
Good Job 👍 👍 👍
U should fill paint in the bottle at the place of water
Paint more thikker than water it won't work
Amazing vdeo thanks for sharing
I like your design. I'm a little surprised a pop bottle is adequate with air pressure and a thin plastic. Have you considered modifying an old fire extinguisher?
Well it holds the pressure of Co2 inside drinking even after lot of shaking. Only things is red circle here are fitted parts
sach me bhai bohat acha jugad kiya like it 10 stars
I see a paint bomb. You know somewhere, someone is going to over inflate this and POW! paint everywhere.
hahahaha hopefully they test it first. but the title should have been homemade reusable spay can. i think that woukd grab more views
I think reusing plastic would be less of a risk
Thanks sahi time pe apka video samne aa gaya
That was so simple and great.
good project 😊
Great idea, but i think you sprey whater, please make videos with paint.
Awesome 👌👏👌👏
New subscriber. I guess you could make your own paint for the sprayer. You just buy regular paint and add paint Thinner to thin it out enough to go through the sprayer. Great video thanks for sharing
sure til the thinner attacks the plastic bottle and it explodes paint all over you..
@@seeburgm100a Water based paint can be thinned with water
@@suoppsdn9751 but that spray can nozzle is designed to atomize solvent based paints. Water based paints will not atomize properly, unless of course your only goal is tagging something w graffiti.
@@seeburgm100a You can put up to about 200 pounds of air pressure in a coke bottle. Believe me it will spray out
Yes but the thinners will melt those plastic bottles
Smart now let get this man to 1 million subscribers
Lo que más me gustó es como hizo pasar la válvula de moto o auto a la botella, sin que se callera. Lo mejor
ua-cam.com/video/L26RBoUX6BE/v-deo.html
wao bro amazing idea
Legand has it the cameraman died when the 1st prototype exploded sending shrapnel everywhere!
Mind blowing Trick...!!!!!!! This can be summer solution.......Thanks.
I know u saw bong first 👀👍
Yeah🤣
True shit🤣
Brilliant idea👍
Street graffiti artists just saved a ton of money.
The best part of video is absence of background music 👍👍👍 perfectooo
Absolutely helpfull creation keep it up
С краской работать не будет,нужно выше середины приёмной трубки сделать отверстие ! Или троиник омывателя авто 90°х90°х45 -вход выход тройника прямые средняя часть 45° будет инжектор! С отверстием в трубке выше середины тоже будет работать!
shit looking at the thumbnail i thought it was a bong🤣🤣
😂😂😂
🤣🤣🤣
Thanks for your idea.
If we start spraying paint and leave it for few minutes then the paint will stick inside the pipe or nozzle and the passage will be blocked as the pipe is very thin....
turn the bottle upside down and spray out whatever remains in the pipe and nozzle. That's what one does with spray cans too bro.
Sending my full support Sir God bless you sir 🙏 from Philippines
This channel makes a spray paint,,,,
Peoples reaction : ?!.,?!
5 minute crafts makes a spray paint,,,
Peoples reaction : OMG🤑🤑🤯🤯😱😱
super idea👍👍👍👍
I honestly thought it was a picture of a homemade bong.
ua-cam.com/channels/NqfW6-xgU1HqiUdmwSaDTQ.html
Wow love it
*I'm thinking what will happen to the spray paint companies after this life hack* 😂😂😂
Nice upload friend ,amazing work👍👍👍
best thing u have not used background music
Whata idia sir Ji....🖒👌🖒👌🖒👌
That's a MacGyver right there... 👍👍 thts cool...
+
Perfect nice
Thumbnail looks like a homemade bong .. lol
Smoke in the water
Didn't you see the nozzle on the bottle??
Nice video
Don't make that type of thumbnail i know the whole thing just from photo 😂😂
I'm happy its not a clickbait
@@yuno_k 👍👍 keep it up
Water.saere
This is great and brilliant idea
So everyone thought thumbnail was a bong lol
No
TetaGama yes
@@sashagrahovac694 I can see it's a peeled 7up bottle. I drink it alot
TetaGama u can see people can make a bong out of that welcome to Australia
Not me cause i read the title first
Pretty slick! Be good to use in doors with pesticides
Plz change your title to "home made air water spray gun " 😁😁😁
Good one
Lovely brother, you are so Talented 👍❤️
Anyone else think this was a bong at first glance of the thumbnail?
I did 😂😂
Yup...lol
Indeed
Yes
You my friend are a genious... or very resourceful...or you could be a copy cat...I dont know...but what ever it is you impressed me
Creative. I did cringe a bit when you were adding pressure, lol.
Amazing! I didn't realise that this could be done.
INGENIOSO, MUY BUENO, GRACIAS POR COMPARTIR! 💯👍
Very very nice video sir thanks sir I'm so happy
As u have shown bike tire waves same manner u should give names of adhesive .To make this I have to purchase any spray bottle.
Bro it is called 'm seal'..
U can find on hardware shop
@@brijeshverma3432 Uttar
I’m going to make this to clean my PC case with compressed air 👏🏻
Great idea. But this is more suitable for spraying plants, just replacing with nozzle spray gun.
xxxBEo
ua-cam.com/video/FgS7oM_A9QM/v-deo.html
Okay now I finally make my own deadly bug killer
Colin ka bottle use karo koi modified nahi krna padega
Nice idea.
Thanks
@plz no smile
Glass saaf karne ke liye aata
Plastic bottles me blue color ka liquid
Mean glass clean karne ka ek product hai.
Demo mein paint daalke dikhana chahiye tha. Theek kaha kisi ne: paint aur pani mein bahut antar hota hai gadhaapan mein. Fire extinguisher bana rahe hain toh theek hai!😜
Wow idea bagus kawan,ok sudah hitam ya support kita punya👍🤝
Simple idia super( thank you)
Maravilla del ingenio humano
wow! so great idea
Its amazing