Mazda MX-3 2.5 V6 0-160
Вставка
- Опубліковано 9 лют 2025
- Modifications:
Engine:
Swap on 2.5 V6 KL -DE with Fora Probe 94r 80,000 miles
Intake system:
Custom Cold Air Intake 3" led from a halogen hole
3' AEM cone
Straight KL-ZE manifold with kl31 throttle, polished intake ducts and Throttle Thin Blade Throttle body
drilled to 65mm
Thermal gaskets for the intake manifold Outlaw Engineering
Exhaust System:
6-2-1 exhaust manifolds.
Bandage for collectors.
Exhaust 2.5" by Kojot.
Muffler 2.5" by M-tech.
Electronics:
K8 k819B computer with a short
Ecumaster DET3 board, Piggy Back mode, tuned by Rafał to KLZE, currently gives about +4KM, +6Nm.
je50 flowmeter
Drivetrain:
Gearbox with k8.
Short shifter.
Clutch EXEDY MZK2080
Replaced lower box cushions with polyurethane ones.
Braking system:
Goodridge steel braided brake lines.
Front discs Mikoda gt.
ATE front pads.
ATE rear discs.
Rear pads ATE
Brake fluid Motul RBF 660 DOT4.
Brake calipers from facelift + regeneration.
Larger Servo with xedos 9
Pump with xedos 9
Suspension:
D2 RACING threaded suspension
Polyurethanes Qdure-flex PERFORMANCE - 85 ShA. Deuter-Olkusz.
Series front strut.
Pro Racing rear strut
Interior:
Weight reduction, half shell
Relocation of the battery to the rear Vector Pro
oil temperature gauge Indiglo dials with red repainting of hands and UV lighting Body: V6 stock package Rear mudguards JDM USDM rear lamps. Advan Racing RZ 15x6.5JJ ET 36 6.5KG Front tires: Toyo R1R 195/50 R15 or Kumho ECSTA XS KU36 205/50 R15 Rear tires: XR01 profile 185/50 R15 soft compound
Achievements:
- 1st place 1/4 mile in Samurai Czaplinek class 2018 best ET: 14.21
Technical data:
Power and torque:
196.1KM @ 6169RPM
237.7Nm @ 4894RPM
Weight: 1080 Kg
More Info and pictures:
www.mazdaspeed...
Bombaaaaa v6 power ;D
Super strong KLDE, it's awesome. Are you running the stock KL01 cams?
@@barcrafthandlebars3755 Yes, i was running kl01 cams
Perfect sound! Must be good muffler/resonator combo. What brand is your rear silencer and what resonator?
hello, have you BALANCED THE FLYWHEEL WITH THE CRANKSHAFT?
What are the engine mods done to get to close to the 200bhp mark?
Here is the thread about this car, u can use translator and translate to english: www.mazdaspeed.pl/forum/viewtopic.php?f=321&t=201052/
Also edited description if you dont know how to translate.
@@marcinwozniak1291 thank you
What type of headers? Stock old ones or some new stainless 6-2-1 style?
6-2-1
@@marcinwozniak1291 custom welded or those ebay ones?
@@michalbures859 ebay ones
Hi, nice car it really pulls.
I would like to do this swap myself on my mx3. Have you got any advice? Any difficulties? Can't find much informations about this in my country.
Yes, leave stock ecu from k8 and vaf. These are the best for 2.5 in terms of power and torque.
@@marcinwozniak1291 alright thank you, shall i keep the distributor from the k8 or KL-DE ?
@@elite33600 yes you can keep k8.
Hey! I have one of those. ;) Except mine's the ZE.
Is there a turbo-kit?
Also kann man den KLDE mit k8 Steuergerät und je50 Luftmassenmesser fahren? Und hat damit mehr Leistung als Kl07 Steuergerät und kl02 Luftmassenmesser?
Yep, ecu k8 is the best for KLDE or KLZE. VAf je50 or kl02 is also good.
@@marcinwozniak1291 da muss ich das doch glatt mal ausprobieren. Ich habe noch ein k8 Steuergerät rum liegen.
@@christrash4124 Ok, but if you have a stock klde with no mods a difference might be small. When I have stock klde on kl05 i have 164KM 190NM, on k8 i have 171KM 206NM.
@@marcinwozniak1291 ich habe an meinem MX3 folgende Mods: Auspuffanlage 63mm mit 200 Zellen Kat und Fächerkrümmer, eine 5 kg Schwungscheibe und die Ansaugung ist verändert.
What gauges are those?
From what I’ve found, Ford probe glow gauges
Goooddd....your setup for 196hp???
3' cai , 2.5 exhaust, 65MM TB, Klze straight Manifold, ecu k8
@@marcinwozniak1291 ouaaaaa ecu k8???i think ecu klde is better?good.....your car is very fast!!!!
@@christianxiong3835 No. Ecu klde is the worst ecu for klde. The best ecu for all k Series, klze, klde, k8 is k8. I confirmed this many times at dyno.
@@marcinwozniak1291 thank you brow....so you use Vaf from k8 or kl?
@@christianxiong3835 from k8 je50 but from KL kl02 is also good.
This is stock ?
Nope