Gutting the innards requires some patience and some special tools. I have a video showing the finished product on the 572 but I’ll do another video tomorrow on your 572 showing how I do them. Nothing wrong with adding the side port. Good job.
On topic with your hot start issue. I have discovered that the 2 things that will let ya get it fired in 1-2 pulls is a new plug n fresh fuel filter. Also I purge that bulb good 6-8 times. Its a purge not a primer so you cant over pump it.
@MitchellsBackyardLogging. Hey man, I’ve got a couple vids I’m sharing to try to help out. It’s good to see you trying to fix that. I’ve spent a fair bit of time on them and have a really slick muffler mod for them. It gets rid of most of the baffles and also removes the bottom portion of the muffler to allow more airflow between the muffler and crankcase to help get the heat out. Remember most places we have to have a spark arrestor screen and my mod keeps it intact. Anyhow, here’s the link. Have a bunch of other vids to help them run better too. Muffler mod ua-cam.com/video/O4lzZLWowjw/v-deo.html Field reset ua-cam.com/video/88vuWgE4JHw/v-deo.html
@@johnpower5526 the 400 is a bit stouter and the same weight but I believe husky is a bit more comfortable and the build as far as saw construction is better not piston and cylinder just the overall build in my opinion
From hearing it in other videos, to this one it sounds like it’s more peppy, thru a camera it’s hard to tell like being in person but to me it sounds faster 👌🤘🤘🤘🤘
It stihl is i like them both i ran husky along while before i bought those stihls i love the 500i and 400c but husky is smooth i just like saws have problem wanting all of them
@@MitchellsBackyardLogging I hope you ain't gonna sell out and go back to husqvarna. That's like going from a Rolls Royce to a rusty skateboard. 🤷🏿♂️🤷🏿♂️🤷🏿♂️🤷🏿♂️🤷🏿♂️🤔 #stihlpower #stihlisyourdaddy #stihlrunstheyard
Gutting the innards requires some patience and some special tools. I have a video showing the finished product on the 572 but I’ll do another video tomorrow on your 572 showing how I do them. Nothing wrong with adding the side port. Good job.
Yes Aaron done it to other 562xp im not that dedicated
Cajun watched it I’m glad you’re doing a video on it.
I just did a video on these muffler mods myself. I went with a stock look from the outside with factory deflector untouched. Thing ripps now !
On topic with your hot start issue. I have discovered that the 2 things that will let ya get it fired in 1-2 pulls is a new plug n fresh fuel filter. Also I purge that bulb good 6-8 times. Its a purge not a primer so you cant over pump it.
Nice job on the muffler Wesley
@MitchellsBackyardLogging. Hey man, I’ve got a couple vids I’m sharing to try to help out. It’s good to see you trying to fix that. I’ve spent a fair bit of time on them and have a really slick muffler mod for them. It gets rid of most of the baffles and also removes the bottom portion of the muffler to allow more airflow between the muffler and crankcase to help get the heat out. Remember most places we have to have a spark arrestor screen and my mod keeps it intact. Anyhow, here’s the link. Have a bunch of other vids to help them run better too.
Muffler mod
ua-cam.com/video/O4lzZLWowjw/v-deo.html
Field reset
ua-cam.com/video/88vuWgE4JHw/v-deo.html
Sounded pretty good to me! Pretty snappy! #73
Nice saw I really don't think the 562 don't need any port work just a muffler and the thing rips
They cut good but they lack a lil torq i got one bein ported
@@MitchellsBackyardLogging how do they compare to a 400 stihl I know for a fact they well blow a 362 out of the water any day of the week
@@johnpower5526 the 400 is a bit stouter and the same weight but I believe husky is a bit more comfortable and the build as far as saw construction is better not piston and cylinder just the overall build in my opinion
did you notice it needing any carburetor adjustments?#1
No the auto tune picked it up good
computer controlled carb , no manual adjustments on the 5 series expect the 585
@@Boost_Addict hes talkin about resetting auto tune theres a reset for mods or from winter to summer of elevation change in the mtronic and auto tune
Or i believe thats what he was askin
From hearing it in other videos, to this one it sounds like it’s more peppy, thru a camera it’s hard to tell like being in person but to me it sounds faster 👌🤘🤘🤘🤘
Anytime u getn more heat out its better 4 the saw.
Sounds good hopefully it will work well #562
I just posted a muffler mod video and then I come across yours.
Cool deal keep yours up two i always like different ideas
@@MitchellsBackyardLogging Welding is black magic to me, that is why my muffler's look stock but they do flow a lot better after I'm done with them.
No video number# sir
What ever happened to Stihl is your daddy??????🤷🏿♂️🤷🏿♂️🤷🏿♂️🤷🏿♂️🤷🏿♂️🤔
It stihl is i like them both i ran husky along while before i bought those stihls i love the 500i and 400c but husky is smooth i just like saws have problem wanting all of them
@@MitchellsBackyardLogging I hope you ain't gonna sell out and go back to husqvarna. That's like going from a Rolls Royce to a rusty skateboard. 🤷🏿♂️🤷🏿♂️🤷🏿♂️🤷🏿♂️🤷🏿♂️🤔 #stihlpower #stihlisyourdaddy #stihlrunstheyard
@@patrickpoulard24 ill run them both here and there lol
he has turned to the dark side
@@patrickpoulard24 lmfao....
#562
Thats a horrible muffler design 😳😳😳😂
It is for sure
@@MitchellsBackyardLogging u done well with that pipe my friend looks good an should work well.
Thank the EPA man .... I open all my 5 series up