How To Repair a Home Water Pressure Regulator and Adjust Water Pressure
Вставка
- Опубліковано 5 жов 2024
- Actual VIDEO details of how to repair a water pressure reducing valve. Wilkins, Zurn or Watts valves have very similar DIY repair procedures.
Discover what a pressure relief valve does and how to determine if the water pressure regulator or the pressure valve has gone bad.
Got high pressure? Low pressure? After the repair I show you how to adjust the household water pressure for your home using a water pressure gauge.
This Do It Yourself how-to home plumbing fix can save you hundreds of dollars.
Camera Gear:
iPhone6 amzn.to/2q32u1L
RetiCAM Smartphone Tripod Mount amzn.to/2qA8Idg
LifeProof FRE amzn.to/2qy5MNT
OtterBox DEFENDER iPhone 6/6s Case amzn.to/2rlj9lE
Rode SmartLav amzn.to/2qA1UfI
Rode VideoMicMe amzn.to/2pZyp3L
YiKaiEn iReader amzn.to/2rkRW2w
Lightning Dock Extender amzn.to/2rkSjtP
Hero 5 amzn.to/2rybQUS
Wasabi Power Battery & Dual Charger for GoPro HERO5 amzn.to/2rxVrQt
Hero 5 Waterproof Case amzn.to/2ry6Cc0
GoPro Breathable Mouth Mount amzn.to/2ryaQQD
GoPro Suction Cup amzn.to/2pZzQzi
GoPro Jaws Flex Clamp amzn.to/2pZQzCD
Canon HF S200 amzn.to/2pZQgaI
Wrist Straps amzn.to/2rl4Iy1
Vantec Smoovie Pocket Video Stabilizer amzn.to/2qDxuqT
Joby MPod Mini Stand for Smartphones amzn.to/2rldsnN
Manfrotto Tripod amzn.to/2ryk5zw
Telesin Dome for GoPro Hero 5 amzn.to/2rT0muU
Litra Lights amzn.to/2tLNCYy
SafeGo amzn.to/2tM1jGY
BROLL and Audio from VideoBlocks Save $50 with this link videoblocks.ref...
![Pressure Reducing Valve Replacement Install and Adjustment [HOW TO] Wilkins Zurn BR4 NR3XL Regulator](/img/n.gif)
I watched a BUNCH of videos on this stuff and checked MY water pressure. As it turned out, mine was at 115psi! 😱. Most videos show you how to change the entire apparatus, but THIS GENTLEMEN SHOWS you how to simply change the internal components. My “Watts” pressure regulator sells for just under $900.00! That is outrageous! The “repair kit” cost only $100.00! This video showed just how simple the repair was. Now, I’m at a comfortable 65psi and no longer worrying about a flood in my house! THANK YOU for showing me how to do this!
Mine is 120 psi never had an issue house is 40 years old.
This video helped me get this done in less than an hour as a rookie. Thank you very much!
Dude - nice job. I didn’t even know they sold a rebuild kit! Thanks for saving me $100.
Had no idea you can rebuild these things! Might be worth a shot! Thanks!
Best of luck.
I watched a number of videos on UA-cam about this very subject. Yours is the only one that helped me. Thank you.
Great video, found another way to help my friend with his regulator issue. We had a problem removing the old one so I’m just going to replace the inside parts. Thank you very much for this well detailed /clear video!
Great job ! I’m glad to see everything came apart fairly easily cuz that’s not always the case lol!
You are the ever lovin' man. I love videos that go right to the meat, no BS involved. Mine will not come apart that easily, I'm 100% sure. Still a great vid.
5 stars ⭐⭐⭐⭐⭐
thank you, i'm in the UK and we have much smaller versions but the insides are much the same. great video
Thanks man. Nice video. I am trouble shooting my fluctualing water pressure. This helped.
What A GREAT series of pertinent, understandable, and clear videos! Thank you so much.
Just rebuilt my 600XL. The new ones are from over $180 to over $300. I was not sure how tight to make the piece that you had the chisel on. Instructions just said do not make "too tight" or the piece might break. I started at 140lbs (intake) like you but put it at 50lbs. Maybe too light but sure works fine in the house...I think I could deal with a lot less than 50. I left the gauge on for many days and found that on some nights (or one day) I had a moment of the pressure going up to 140 and staying there! In the morning, I turned on a faucet in the house and the pressure went back down to 50 and stayed all day until the next spike. The one time this happened during the day, the pressure came back down by itself but I could see by the "recording needle" where it had been. I think that O ring is the weak link. Maybe I could just buy a few of those plus carefully emory cloth the bore it fits into that you mentioned must be smooth.
The regulator may be working just fine. If the down stream piping is not equipped with a thermal expansion tank and there is no water flowing, the regulator may close, trapping water. Then when the hot water heater turns on warming water starts to expand, but it has no place to go. The expanding water raises the water pressure you see on your gage. The pipes expand ever so slightly to accommodate the increasing pressure.
It's a good practice to install a thermal expansion tank. It helps protect and extend the life of the regulator, solenoid valves, and the lining of hot water heaters, etc.
Cool video man! I like the way you did the video. Other guys are boring but you were pretty smooth on explaining it all. Just subscribed!
Awesome. Thanks.
I am so pleased to find your video related to my problem. Very instructive. Thank you so much for uploading it.
Awesome. Thanks. Glad I could help. You can help me by subscribing so I can get to 100k subscribers.
Just subscribed. Keep up the good work
Awesome. Thanks.
Hero! Love the wood chisle.. macguyver would be proud 🙏🏼
Thanks so much! This is exactly what I needed to fix this exact issue. Bought my kit at Larry and Joe’s too!
Awesome job with the breakdown and walk thru!!
Great video man. Well spoken and not a lot of minutia
Thanks, this helped me alot! Liked that quick shot of Larry and Joe's in Northridge !
You’re welcome. It’s actually the Mission Hills location. Glad I could help. You can help me by subscribing so I can get to 100k subscribers.
Hey buddy it’s been awhile , saw this video doing some DIY research on water pressure and I said to my wife I know that dude!
Thanks for the tips and let’s see if we can get you to 100k.
Lol. Awesome. Small world. Long time bro. I just sent an email to your gmail address.
Short and straight to the point, well done. very helpful and great video work too boot.
THANKS SO MUCH. I eliminated banging pipes by buying a gauge and adjusting pressure from 100 to 60.
Thank you very much for your great video, clear, detailed and very helpful, I got all info I need to fix the problem..
Good job, good video. I have a Wilkins 70 that has failed, but they don't make them anymore. However, they do supply the Wilkins 70xl as a replacement. It's just 70 bucks on Amazon, so I'm just going to replace the entire regulator. I hope my repair goes as smooth as yours did.
The Wilkins 70 & 70XL are the same mechanically. The parts are interchangeable. The difference between the models is the XL models are lead free. Unless lead is a serious concern to you, the changing of PSR's was not completely necessary.
best video I have seen on here so far....good job
Thanks. Glad I could help. You can help me by subscribing so I can get to 100k subscribers.
Thanks. That was informative!
Thanks for the video.
Very interesting and helpful.
nice job. feel confident to tackle mine
Good video very informative. I need to install a ball valve for main shut off and pressure regulator.
Thanks. Please subscribe so I can get to 100k subs.
Very cool Vince, nice work. Good info. I might not of tried this before your video. take care . Bruce
It turned out to be a simple easy repair. Pick up a pressure gauge from Lowes and see what your pressure is at.
My plumber just quoted me $575 to replace my water pressure valve. My problem is my water pressure is too low when I run two faucets at one time. I hope my repair will fix the problem for $60!!! Hopefully I won’t make anything worse.
Very well explained. Great video.
Good job-the American way-either way you go price out of this world.
SUPER!Video.Th.Henry.
Great vid man. Thanks for the help!
Hot water coming out of the sink or shower will pulsate. Once the water starts to get warm the pressure will drop and then return for as long as we have it running. If I turn on only the cold, it does not seem to happen. Pressure out in the yard runs about 75psi, outside back of the house it is 60-65psi, at the hot water tank drain it will be 60psi. City water, 80gal HW tank, 5 gal expansion tank that is about three yrs old. When I installed the expansion tank the house pressure was 45 to 50 so I pumped the tank pressure to that number. At the time the outside pressure was running 80+. In three years they have built 8 new homes between me and the big water tank down the road with two more under construction. I am really not wanting to tackle the regulator. It is in a hole 4ft down and 2ft x 1 ft. I will have to dig to get to it. The plumper plumbed the new house and the contractor backfilled afterwards. Thoughts? I am going to check the expansion tank but I a pair of gloves and a shovel are in my future.
Hot dang this is a useful video...Thanks!
GREAT JOB MAN...
Thanks. Glad I could help. You can help me by subscribing so I can get to 100k subscribers.
Thanks man!
You're the MacGyver of home repairs.
Lol. Next week is an attic fan install. And I think I might hack a Makita Drill soon.
Very well done and informative video!
Thanks. Hope it was helpful. Please subscribe so I can get to 100k subs.
Bahaha going to Larry and Joes today!
Thank mate, nicely done!
Good job.
Thanks. Glad I could help. You can help me by subscribing so I can get to 100k subscribers.
Thank u sir its very help video very informative 👍
Well done, thanks
Great video.
Good job
good video thank you
You’re welcome. Glad I could help. You can help me by subscribing so I can get to 100k subscribers.
Thanks for the informative video. Subscribed.
Awesome. Thanks.
Awesome video 👍👍
Your not supposed to install those upside down. It allows debris to collect in places you don't want it.
Does the high pressure affect water meter? My bills are very high.
My water tank keeps blowing release valve would it be a regulator problem or should I replace the pressure reducer
That’s actually a serious issue. The water tank has a temperature and pressure relief valve. They should be replaced every few years. So it could be faulty or too hot or too much pressure. That pressure could be from the regulator or from the tank itself. You need to pressure test the system and temperature check. It’s probably best to get a professional plumber out to have a look. Search UA-cam for “mythbusters hot water tank” to see how serious it can be. Please subscribe so I can get to 100k subs.
I’m scared to mess something up. How much do you reckon it costs to get a plumber to do it?
With me it was the big black diaphram that was busted. Could not find a rebuild kit for my model so 200 bucks for a new one. still kept the old one and will keep trying to find a kit or I will just frankenstein it.
That pressure safety relief valve probably saved the home owners from a bunch of ruptured/busted pipe solder joints. If that safety is lifting at 148 psi the street water pressure must be REALLY high. No wonder that regulator was 'singing' lol...
EZ-Peezy, Thank You 💦👍🏼💧
Do you know if the Wilkins 600 and the Zurn-Wilkins 600XL regulators use the same repair kit? A couple of places I contacted including the Zurn-Wilkins customer service could not tell me if the Zurn-Wilkins 600XL repair kit works on a Wilkins 600 regulator. My regulator has a 1.5” inlet and 1.25” outlet (even this is puzzling me). Even an online hardware supplier could not give me an answer, nor local hardware stores. Yours looks exactly like mine, Wilkins 600, except for the in/out pipe size, are yours both the same size?
Is that a piece of mc in the hose bib hole lol im a electrician and its however you can get it to power lol great video thanks man
Would this also be the reason for poor water pressure?
If it is set too low then it can be.
what is the expected lifespan of these? thanks!
7 to 10 years. Also cleaning the filters on them every 2 years helps.
@@Falangist thanks
Hay lắm
Thanks for the video. I am ready to attempt this myself but need to know if the Wilkins and Watts repair kits are interchangeable? I have a Watts 25AUB and it looks almost exactly the same as the 600. I cannot find any kits for the watts similar to what you used.
and just like that i found the answer myself but might be helpful for others. www.zurn.com/media-library/web_documents/pdfs/crossreference/wilkins_prv_xref-pdf.aspx
Vince, my pipe(s) vibrates when the cold water is running. It never happened before. Watching your video could it be my pressure reducing valve, please help. Thanks
Keep in mind. I’m not a plumber, I’m a television editor who works on his own house. But, there are many things that can cause a vibration or “water hammer” the spring in the valve can be one of them. You can try screwing the bolt in or out to adjust the pressure and see if it reducers the vibration.
Two failed in 5 years I removed it tossed it in the trash. Plumber talked me into installing it house was fine for 40 years without one now my sprinkler system works better. I like having 120 psi.
Why does my water pressure value regukator make a ticking sound? It is brand new.
Do you know how you can tell which kit i need in term of size.... I see kits for 3/4", 1" or 1 1/4". My Watts unit does not say. Is that the diameter of the bottom cap?
The size refers to the size of pipe the valve is made for. It should also be embossed in the body of the valve. Plus there’s usually a tag on the top nut with the model number.
Hey man. I replaced my whole regulator, just bought a new one. But 2 weeks down the line and i alreaady have the same problem again. When i turn on the faucet the pressure is high for the 1st 2 secs
I discovered that my house is a closed system. Heat expansion can cause pressure buildup in a closed system. You may need an expansion tank to relieve or regulate the pressure.
So you're getting from the water line 965 kPa - 140 psi
That's crazy pressure!!!! Almost 1 MPa!!!
That's so insanely crazy pressure!!!!!
Literally!!! Fire hydrants are at around 2 MPa - 300 psi
Our pressure is around 300 kPa - 43.6 psi
And even that isn't enough for us
And yes we have a pressure regulator
But we had a clog of some kind and we're getting around 250 kPa - 36 psi
Then we bought a new pressure regulator for about 40€ - ~50$
And then our dad has miraculously fixed it and it was giving out 400 kPa - 58 psi and then we had dirty water (just a little bit of it, it even had sand in it) for a while and it was fine , the pressure was stable and reliable, that's why we took the bought pressure regulator back to the plumbing store, so they can refund our money. The pressure was stable, BUT not forever because after 3 days we again had around 300 kPa - 43.6 psi
How much would that cost?
you did not state torque on kit when replaced...
I didn’t use a torque wrench.
I can solve a Rubik’s cube. Hopefully this job will be a lot faster to learn.
Mine is inch and a quarter, plumbing supply house charge me 500 bucks for a new one I should’ve asked about the kit for the inside
I didn't know Jack Sparrow did plumbing.
LOL. It’s been a while since I got that comparison. Thanks.
Not for nothing but did you try to adjust the existing regulator before you replaced the parts, maybe that was all that was needed???
Yes I did.
@@VinceRocca I figured you did, it just wasn't in the video.
We don't have that here we uses a water pump to get 55PSI.
Interesting. Here, in flat areas they pump the water up to a tower and use gravity pressure to serve the town. You pump directly from a well into the house?
WASA (water and sewage authority) is our water company they has Dams and Wells where they purifies water for drinking and pumps to houses but during the day the water pressure are weak so at nights our water tanks fill up and the day we uses our pumps to supply the home each home has a personal tank and 1/2 hp pump. The tanks comes in 200, 400, 600, 800 and 1000 gallons. I have 2 - 600 gallons.
Neat. Interesting stuff. Interesting to me anyway.
Make more Rubik's cube videos
If Leonardo DiCaprio became a plumber...
I must admit I was gritting my teeth, waiting for the skinned knuckes/slip of the wrench, when loosening.
LOL. I thought about faking an injury, but decided not to.
Yes. Crescent wrenches are not the best tool to loosen really tight square nuts. I cringed a bit.
We don't have regulator in home still watched the video.. xe
Why are your water pipes outside, EH.
Old California homes have them set up that way. Easier to do repairs on them. My home is the same, and so are all the other houses in my neighborhood.
It's always the O-ring...
SFV 818 represent! BTW, Larry and Joe's would be awesome if that lady manager wasn't working there! She's rude, horrible attitude and just plain toxic11
not suppose to install pressure reducers upside down like that...
It’s installed vertically. But I can’t imagine how gravity can effect 80-200 pounds of pressure.
@@VinceRocca that is vertical?? why is the adjusting screw on the bottom facing down??
Ahh, you are correct. In this video it is upside down. It has since been re-plumbed and is now vertical. I mistakenly thought when I made this video it was post replumb.
But still, I can’t see gravity effecting a regulator at any angle. The 80-200psi is gravity defying. I googled and plenty of responses say you can mount them in any orientation. So I’d love to hear why it can’t be?
Please enlighten us as to why?
@@charlesmirabal1671 Debris (sand/silt) can collect in places inside the regulator that you don't want it to.
Ppl)
60 bucks for $10 worth of parts. Nice job though.
Thanks. Please subscribe so I can get to 100k subs.