Thanks bro!you just saved me from going to a repair shop and getting scammed out of my money!i watched a video from a large creator in which he didnt even show the full picture of the motherboard!thank you so much.
thank you this will help me tomorrow for my performance. I got nervous on connecting front panel connectors but I found this video very helpful. So thank you so much .
Dude was having such an issue with seeing those hemroid inducing pins for the front panel, your video helped me get everything situated, thank you! Rocked a different pin setup as well, asus pro a320 wifi model, but generally speaking it booted up right after.
Thanks a lot bro I was so much confused about the front panel by mistaskly I removed the pins and later on I did not get that how to connect it thank you bro you are just Angel for me and help me ❤️❣️💓
BRO so i brought a pc and it wasn’t turning on or anything, turns out some one put the reset sw on a completely different place and u just save me spending so much money, thanks 🙏
@@RonnelRaGolosino another doubt for me .on my mother board there r 4 slot of SATA output like 0123 I gonna put only one hard disk, now which slort gonna connect . Plz help me .I am only 16 but I am trying to build a pc .my only trust is you plz help me..
@@rathikaedison485 do you have dvdrom or writer to install? You have to put the sata connector first for the dvdrom. You can choose either 0,1 or 2 slot. The sata connector for the hard disk should be place at the 3 slot or last slot. And then set the boot priority on BIOS. The DVD rom must set on primary and harddisk set on secondary.
But if you only want to install hard disk, you can put SATA connector in any slot. Also, you don't need to configure BIOS set up. Hard disk drive will be automatically detected on primary. And this will set on first boot priority. And you're good. Hope this will help. Thank you very much.
Its always the small creators that help the most!
Thank you
That’s facts
Real!!
I know right
faxx
Thankyou sayo idol at nakahanap din ako nang naka F2A68HM na motherboard ❤❤❤
Salamat din po 😊
Thanks bro!you just saved me from going to a repair shop and getting scammed out of my money!i watched a video from a large creator in which he didnt even show the full picture of the motherboard!thank you so much.
I love you my new pc finally turned on🎉
Yall, this vid got my pc to boot again thank you so much!😭❤️
I wish i could like this video a 100 times 🙇♂️💯thanks bro
thank you sir for saving me from my parents attack for my excitement on pc
You saved me a pretty penny dude, thank you so much . A fool proof guide to follow 👍🏽
No problem 👍
The savior of my diploma project, thank you very much, God bless you, best wishes❤❤❤
Thanks ... Kitni Video Dekha Kisi Ne + /- Ki Bariki Kisi Ne Nahi Bataya ...👍
Izzat bacha liya.. thanks
මෙකන් පට්ටෙටම වටින විඩීයො එකක් අයියේ ....! ❤️🔥😍
Watching this while im building my first ever pc at 2am,so helpfull and usefull,quick and amazimg job my guy you helped me the most
thank you 👍
Thanks mate, was cleaning my PC and accidently pulled some cables out. U saved my ass ❤❤❤❤
Thanks brother it helps me a lot .From this video I am able to connect the power supply and power led ....Dil se thanks brother 🙏🙏
@@mayanksingh8042 thank you sir.
What everyone else says this video is so incredibly helpful :) .. thank you so very much :)
Glad it was helpful!
Thanks! At first I was skeptical because of no voice, but the guide is very well made.
Thanks 🙏
thank you this will help me tomorrow for my performance. I got nervous on connecting front panel connectors but I found this video very helpful. So thank you so much .
Damn I learned more from you than my computer teacher your the best man thank you!
Thank you sir
You saved my life thanks. STAY WELL
Thanks, you too!
Man, THAT is the way to film putting in Front Panel Connectors. Thanks!
Glad to help
Thank you so much ❤. I didnt know about switch and because of you i was able to turn on my pc.
I easly understand after watching this video thanks🙏 bhai, I hope you will make such video.
Omg thank you saved my life❤❤❤❤❤❤❤❤❤
Thank you very much. The BEST tutorial for front panel connectors hands down. Great
Your a diamond. Thanks so much. Only one I found that helps
Glad I could help
University of UA-cam.... Really helped I was panicking when I disconnected all the cables
sobrang malaking tong kaalaman na binahagi mo lodz
salamat po!
You don't know how helpful it was
Very very helpful bro
Weldone
Thanks it was very much helpful
Glad it helped
You don't know how much you helped me!!!
I found out that these cables were un plugged that's why i couldn't turn on my pc
You saved me Sir!!..THANK YOU VERY MUCH
Thank you very much you saved my life
Finally Someone !!!😝 thank you man 🥰
Dude was having such an issue with seeing those hemroid inducing pins for the front panel, your video helped me get everything situated, thank you! Rocked a different pin setup as well, asus pro a320 wifi model, but generally speaking it booted up right after.
Thanks a lot bro I was so much confused about the front panel by mistaskly I removed the pins and later on I did not get that how to connect it thank you bro you are just Angel for me and help me ❤️❣️💓
Thank you!
I have watched this tutorial 5x already when building/changing desktops. So quick, usefull, saved on a private playlist. Thanks mate!
Oh my gosh this video was more helpful then the other ones thank you so much
Thank u so much man😂 this cables are so tricky
BRO so i brought a pc and it wasn’t turning on or anything, turns out some one put the reset sw on a completely different place and u just save me spending so much money, thanks 🙏
welcome.
Thank You So mutch bro, Its very helpfull👍👍👍👍😍
U saves my life bro
Thanks a lot my guy got a new motherboard and completely forgot how these went
Buenas saludos desde Perú 🇵🇪
Buen video soluciono mi problema
De mi PC
Gracias bendiciones 🙏😇
Life saver. Was wondering why PC wouldn't boot
Where was this video yesterday when I specifically needed to know how to plug the headers from the f panel? 💀
ये वीडियो 100% काम करती है thank you bro
you're welcome
Ur r the best I totally recommend watching this vid it saved me soooo much I liked and subed and turned on post notifications man
Thank you so much.
I will try this to my no power pc thanks man
Good luck!
Very useful video ▶️ hats off
Thank you very much man,, this vedio helped me a lot
you're welcome sir!
I'm building a pc and this was much help from you. Thank you! :)
You saved my life bro!!! Keep up the good work ; )
Thanks for this video I was set my pc through this video thanks a lot
Sir but my pc doesn't sirf line aa rha h desktop on nhi ho rha ups main line aa rha h
Thank you very much.
I am srilankan and I am grade 10.
I did it.
Your video is good..
Thanks and welcome
This is a thank you for sharing how to do the right thing for connections.
thank you so much i have been struggling for like a hour
Thank you for your help on this video ❤️❤️❤️❤️❤️❤️
Tnx for the tutorial very useful lalo sa nga nahihirapan mag set up
Thank you very much! Helped me a lot to recover an old PC (Pentium IV)
You're welcome!
It helpsed me so much👍👍👍
Thank you so much man.. i could not understand anything in other videos but yours was the best. My problem is also fixed! Subbed to you :) ❤️
Vlw mano aqui no Brasil não achei nem um video bem explicado igual o seu vlw msm !!
Very helpful..good to know about ..thanks for sharing
Crystal Clear Tutorial!!! Thanks!!
Thanks for this, You save my time and keep up the good work!
Thanks a lot
I was calling computer tech for that. I was cleaning cpu I removed f panel pins and I was confused where to fix it. Thanks a lot sir
Glad it helped
Thank you so much brother, it really helped me...🙏🙏🙏✨🌟☺️☺️💖
You're welcome
I cannot tell you how thank full I am your the best
Thank you ❤️😘😘😘😘
Thank you for this tutorial , It did help me a lot ❤️
You're awesome! You deserve way more subscribers than you have.
Thank you sir!
Thank you so much brother 🙏🏻🙏🏻🥰🥰🥰
Thank you for this laking tulong to sakin lalo pa mahilig ako mag kumpuni ng pc ko
Thank u boss...Pta nhi kese wire nikl gya tha power sw ka
this was incredibly helpful thank you!
Thank u brother, really helped alot ❤️
TYSM!! MY PC WORKS AGAIN
Glad it helped!
Thank you so much❤️😭, i almost cry I don't know how to Connect this and i don't even know what they call❤️
My motherboard does not has the labels to it for example power led, so can I place them the same as you did on your motherboard
Thanks very thanks bro I am stuck at this but u helped me bro because I am a beginner
You're Welcome bro! I'm happy that i can help in a little way.
@@RonnelRaGolosino another doubt for me .on my mother board there r 4 slot of SATA output like 0123 I gonna put only one hard disk, now which slort gonna connect . Plz help me .I am only 16 but I am trying to build a pc .my only trust is you plz help me..
@@rathikaedison485 do you have dvdrom or writer to install? You have to put the sata connector first for the dvdrom. You can choose either 0,1 or 2 slot. The sata connector for the hard disk should be place at the 3 slot or last slot. And then set the boot priority on BIOS. The DVD rom must set on primary and harddisk set on secondary.
But if you only want to install hard disk, you can put SATA connector in any slot. Also, you don't need to configure BIOS set up. Hard disk drive will be automatically detected on primary. And this will set on first boot priority. And you're good. Hope this will help. Thank you very much.
@@RonnelRaGolosino thanks for helping me and thanks for responding me Anna .I am 16 but I am going to set up a pc .😏😏😏
Thnx for helping ntjamme ✌✌
Seriously very thank you bro❤️❤️
Learn more from this guy than you do in school 😂
This really helped, thanks😁👍
Thanks
Excellent, thanks for helping me fix a stressed sons pc
Glad to help
Thanks bro it's really helps and you save me of this problem hayyys.
Rock on brother..continue sharing your knowledge..
Thank you brother.
Thank you so much for this 🎉❤
You are amazing my friend👍thank you so much
Thank you too
Thanks for ur help brother ❤
Thanks sa tutorial my fried.. GOD BLESS YOU
thanks for your sharing
very informative video,may natutunan ako.
Very detailed and informative. I was able to do it myself wohoo
This is very helpful. Thanks for sharing.
Very informative content thank ypu for sharing your knowledge and skills
New subscriber bhaiya
Thnxxx for making this video
Salamat po sa pagshare, may idea na ako ngayon