Funny part to update my older model to the new one still have to remove the seat ugh. These are hard to clean specially the nozzles and behind then. I squart some peroxide on them and it pretty much cleans them including the rim.
No, once installed correctly, it will lift up without an issue. I just pushed it too far back the first time and I wanted to show that mistake to hopefully help others.
Trying to understand what the seat will be like afterwards: Will it slope down towards the front, flex when I sit on it, etc. Will there be an obvious, weird gap under the seat? I don't quite understand what to expect and how the bumpers fit into all of that.
mine does slope down a little, however, after a few sits I don't notice it anymore. However, the gap is definitely there, so I have a couple bumpers on the bottom of the seat to bridge the gap. I think I mentioned it in the review. If not its definitely in my review of the older one!
Glad to see someone has a brain and used a glass bowl. Seen so many stupid presenters who get the bathroom wet. Don't like the comment that bumpers are needed. Everyone else can design without them. (Maybe the reason why you can fold up to clean under). Seems.like some plastic parts. Why not all brass plumbing? Glad this model can adjust the location of the spray. Think designers could come up with a directional control or just allow the user to manually adjust the sprayer in the toilet. How sensitive is the volume know? First time user would want to be soft. (I assume there is no backflow preventer.) Thanks for posting
Thanks for this. Of all the luxe 185 plus videos I've watched, this one was the most detailed like explaining the hinge covers
@@ImPipkinrick thank you! That's always my goal; to answer all the questions.
This is the one I need! The ability to fold it out of the way is a game changer!!
It really is!
What these need is some kind of leak detection when inner hoses fail. Might not find out until a flood so they can close off water feed.
@kinglord5429 i don't know thay I'm too worried about that with the quality of materials that they use
Funny part to update my older model to the new one still have to remove the seat ugh. These are hard to clean specially the nozzles and behind then. I squart some peroxide on them and it pretty much cleans them including the rim.
I found their raises don't last long. I needed to replace mine with third party ones that are still fine after 2 years they had red bottoms pads
@@kinglord5429 I got my risers before they started selling them, and mine are holding up great too. I winder why theirs wouldn't
The clear bowl is genius!
Haha thanks!
Do you have to unscrew to pull it to lift it to clean then push it back and tighten screw?
No, once installed correctly, it will lift up without an issue. I just pushed it too far back the first time and I wanted to show that mistake to hopefully help others.
Trying to understand what the seat will be like afterwards: Will it slope down towards the front, flex when I sit on it, etc. Will there be an obvious, weird gap under the seat? I don't quite understand what to expect and how the bumpers fit into all of that.
mine does slope down a little, however, after a few sits I don't notice it anymore. However, the gap is definitely there, so I have a couple bumpers on the bottom of the seat to bridge the gap. I think I mentioned it in the review. If not its definitely in my review of the older one!
Glad to see someone has a brain and used a glass bowl. Seen so many stupid presenters who get the bathroom wet. Don't like the comment that bumpers are needed. Everyone else can design without them. (Maybe the reason why you can fold up to clean under). Seems.like some plastic parts. Why not all brass plumbing? Glad this model can adjust the location of the spray. Think designers could come up with a directional control or just allow the user to manually adjust the sprayer in the toilet. How sensitive is the volume know? First time user would want to be soft. (I assume there is no backflow preventer.) Thanks for posting
Is the water not cold?
It's as cold as your tap water. If you want warmer water they do have an upgrade that will connect your hot water to it to control the temperature
Hey Grant, did you know that the link to register for 5000 giveaway is not working?
I didn't, try it again, and let me know
I would have liked to see you use it. 😉
🤣 I'm not looking to get demonetized here lol
I showed using it in my previous bidet video
@GrantButler I'll have to check it out ha.
Love to win that Bidet bro Happy Father's Day
Happy father's day!
Not sure I could get used to that! LOL
@@JimMcPartland 😅😅 don't knock it till you try it
Yikes
What?