this video came on perfect time. one door the windows won't go down. and the other stays on same place when opening the door. thanks for the informative video's!
Good video. I think it would be worth mentioning the two stops at the top that are adjusted on a 10mm nut. The stops that regulate the windows height and final angle.
TABRAO does this also impact movement in the window? My window regulator works fine but I guess due to window being pushed over time to shut the door. The window jiggles a bit in its position, east and west
very intersting tutorial thanks a lot, is there a reason why electricity dont go on driver window motor? iv tested motor and switch already, just smal click on fuse box wen pressed, maybe a relayer?
Thank you for all these helpful videos. I'm restoring a Gtv V6 also, keep up the good job and videos. Are you planning on making a video of replacing the front discs and refurbishing the calipers? :)
Hi, have you done a video on removal/replacement of the door glass? , having undone the bottom 2 bolts will it lift or if you undo the side runner bolts? Thanks.
another great video Neil, question, for you my passenger side window is lined with scratches like its touched something inside the door. i will replace the glass at some point, can i just lift the glass out once disconnected from regulator and then replace? also any idea why it would be scratched ? thanks
I wonder if you can help me? Auto drop has stopped and I can’t operate drivers side window. Will it be the motor at fault or the regulator. How the hell do you change it if you can’t put the window down? I’m lost 😞
Love your videos! Thank you for taking the time to do them 😊 I have a late 2001 GTV, my passenger side (RHD) window goes down sometimes but really struggles and gives up when coming back up. Had a referb motor fitted to it and it seemed to work fine for a couple of weeks before this happened. Also the auto drop on the driver's door doesn't always work, needing me to press the window up botton before I shut the door to make the window drop down before closing, would this be the micro switch?
Thank you very much for your informative video! I need to replace the window regulator in my GTV but since I've recently moved to a new city I don't have many tools available and I'll need to buy them. Could you please kindly tell me what are the tools needed for these work, a set of screwdrivers from what I understood and could you tell me please what type of screwdrivers and what diameter? Thank you so much!
Hi. I have a 2000 series 2 model. This doesn't have auto drop right? Recently my passenger window seems to be higher and doesn't sit in the top rubber. Can the height of the glass be adjusted as well? It suddenly seems to go too high. I'm wondering if somebody tried to get in.
If the window is stuck up, even if I were to somehow reach up and remove the glass bolts, how would I be able to close the whole assembly so it can be removed?
another great video Neil, question, for you my passenger side window is lined with scratches like its touched something inside the door. i will replace the glass at some point, can i just lift the glass out once disconnected from regulator and then replace? also any idea why it would be scratched ? thanks
You cover more of the whole cars than even most specialist mechanics. You're leading the way with these great demonstrations which are hard to find.
Thanks Neil, this and the door card video made today much easier for me! The hardest part was getting the door back on the pegs...
this video came on perfect time. one door the windows won't go down. and the other stays on same place when opening the door.
thanks for the informative video's!
glad to be of help.
I've needed this video for thirteen years, thank you soooo much!
Good video. I think it would be worth mentioning the two stops at the top that are adjusted on a 10mm nut. The stops that regulate the windows height and final angle.
And the adjustment on the rails that tilt the glass in and out. I made a 4mm guage to set those and the gap for the glass to the B pillar side.
TABRAO does this also impact movement in the window? My window regulator works fine but I guess due to window being pushed over time to shut the door. The window jiggles a bit in its position, east and west
@@Adrian-cv9gf Not sure but i would check if any bolts are loose to start with.
Magic job Neil. Great video.
Glad you enjoyed it
very intersting tutorial thanks a lot, is there a reason why electricity dont go on driver window motor? iv tested motor and switch already, just smal click on fuse box wen pressed, maybe a relayer?
Another great guide, wouldn't change a thing in it. Thanks
Actually, would it make sense to mark the glass installation spots before removing?
Thank you for all these helpful videos.
I'm restoring a Gtv V6 also, keep up the good job and videos.
Are you planning on making a video of replacing the front discs and refurbishing the calipers? :)
Top man. So handy to see your video. Thanks
Glad it helped
Hi, have you done a video on removal/replacement of the door glass? , having undone the bottom 2 bolts will it lift or if you undo the side runner bolts? Thanks.
I have not
Extremely helpful video, thanks 👍
Could you please make a short video about the change of the Master brake cylinder of the 916 spider.?great work!
another great video Neil, question, for you my passenger side window is lined with scratches like its touched something inside the door. i will replace the glass at some point, can i just lift the glass out once disconnected from regulator and then replace? also any idea why it would be scratched ? thanks
Just used this to fix the alignment on my spider window 👍
I wonder if you can help me? Auto drop has stopped and I can’t operate drivers side window. Will it be the motor at fault or the regulator. How the hell do you change it if you can’t put the window down? I’m lost 😞
Thanks for this vidéo 👍👍👍
Love your videos! Thank you for taking the time to do them 😊
I have a late 2001 GTV, my passenger side (RHD) window goes down sometimes but really struggles and gives up when coming back up. Had a referb motor fitted to it and it seemed to work fine for a couple of weeks before this happened.
Also the auto drop on the driver's door doesn't always work, needing me to press the window up botton before I shut the door to make the window drop down before closing, would this be the micro switch?
Hi yes it should be the switch try adjusting it. Also grease the runners.
can it fix window bug by replacing the ble ecu box near fuse box?
Thank you very much for your informative video!
I need to replace the window regulator in my GTV but since I've recently moved to a new city I don't have many tools available and I'll need to buy them. Could you please kindly tell me what are the tools needed for these work, a set of screwdrivers from what I understood and could you tell me please what type of screwdrivers and what diameter? Thank you so much!
Just a basic tool kit will be enough £40 in any tool shop
i dont think the phase 1 came with the window drop ,well mine hasn't anyway ...great video
No it didn't but its the same process just with out that part
Fantastic video Neil, you always make it look like it is very easy!
@@Tuulster70 thanks
Hi. Should every GTV have a window drop mechanism? Today I bought a T’reg (99) - the owner said that year didn’t have them ?
Great video thanks changed mine out today but now every time I lock drives door it unlocks itself any idea what I’ve managed to do now lol
You need to re position the door card.
@@ItaliaAutos thank you will give that a go much appreciated
@@ItaliaAutos thanks again problem solved your help very much appreciated sir 👍🏻👍🏻
Thanks Neil, that is very useful - got a problem on a GT window too if you’re inclined to do a vid for that in the future? 👍🏻
It's a future video. Need another scrapper now.
@@ItaliaAutos Don't scrap one just for me mate!
@@TheAlfaNut yeah do you feel guilty lol. Alfa killer 🤣🤣🤣
Poor little Alfas - the weaklings must be sacrificed to make the brave ones live on!! 😈
Great video. Thanks for job!
Thank you.
Any tips on how to remove it if the window doesn't work and window is now fully up?
Take out the motor. 3 Philips screws
Thanks for posting this. My driver’s side window is jammed up though. Is it possible to get the window bolts removed with it fully up?
you will need to get your hand up there with a spanner.
Having this issue too, did you get a fix ? thanks
Hi. I have a 2000 series 2 model. This doesn't have auto drop right? Recently my passenger window seems to be higher and doesn't sit in the top rubber. Can the height of the glass be adjusted as well? It suddenly seems to go too high. I'm wondering if somebody tried to get in.
From 2001. Done a video on adjustment. Join up on Patreon and I can advise you on how to sort it,
how to find fusebox in alfa romeo gtv twin spark 916
Is it the same for a alfa romeo gt please
Nope
If the window is stuck up, even if I were to somehow reach up and remove the glass bolts, how would I be able to close the whole assembly so it can be removed?
you can pull out the motor only 3 philips screws.
@@ItaliaAutos What can I do, if the motor is also stuck.
What car is that one neil a breaker
Phase 3 gtv. Breaker
@@ItaliaAutos as your breaking that could you show how to remove the door mirors all tbe best neil
is this the same as GT ? thanks
No totally different 👍
A question if you're still here: where the heck do I FIND a window regulator for a 916?
I've got some phase 2 used ones
@ItaliaAutos I have a RHD 1998, will they work for it?
Добрый день на всех gtv стоят доводчики стёкол
its the brummie twang.
another great video Neil, question, for you my passenger side window is lined with scratches like its touched something inside the door. i will replace the glass at some point, can i just lift the glass out once disconnected from regulator and then replace? also any idea why it would be scratched ? thanks