The sensor should cost around 25-35 EUR as new aftermarket part. However, VW TDI engines often eat the wiring from the sensor to ECU and if you see MAP readings around 1600 mbar instead of expected value, the wiring is probably broken (or shorted) and ECU is mistaking temperature reading from the sensor as pressure. See video ua-cam.com/video/ekhju8YG7Mw/v-deo.htmlsi=QrsBKRDS6z855uUY for an example.
Hello I have a vw passat cc 2.0 tdi 2009 I get these two codes p0238 p0113.the problem is I changed the sensor back to the same codes I took out on the computer. Thanks for help
Check the wiring because these engines are known to eat the wiring between the sensor and ECU. See video ua-cam.com/video/ekhju8YG7Mw/v-deo.htmlsi=QrsBKRDS6z855uUY for a further explanation.
The sensor should cost around 25-35 EUR as new aftermarket part. However, VW TDI engines often eat the wiring from the sensor to ECU and if you see MAP readings around 1600 mbar instead of expected value, the wiring is probably broken (or shorted) and ECU is mistaking temperature reading from the sensor as pressure. See video ua-cam.com/video/ekhju8YG7Mw/v-deo.htmlsi=QrsBKRDS6z855uUY for an example.
Your video was very informative. What kind of cleaner did you use? I found the sensor at FCP Euro for 27 dollars if I need to replace it.
It's in the description.
CRC SensorKleen Mass Airflow Sensor Cleaner.
Sensor OEM part number 03G906051M cost at dealership $130.00 CA
I've replaced it and error appeared again :(
Can't hear you or see very much of what you're doing
Hello
I have a vw passat cc 2.0 tdi 2009 I get these two codes p0238 p0113.the problem is I changed the sensor back to the same codes I took out on the computer.
Thanks for help
Check the wiring because these engines are known to eat the wiring between the sensor and ECU. See video ua-cam.com/video/ekhju8YG7Mw/v-deo.htmlsi=QrsBKRDS6z855uUY for a further explanation.
Where is this sensor located???
I don’t have this on mine