Nech poslúži 👍 ja na tej píle režem či už dosky, tak aj plasty, skrutky všetko čo len príde akurát treba zvoliť vždy kvalitné pásy napr značky pilous a tiež správny zub podľa toho čo plánuješ najčastejšie rezať. Smiem vedieť, skadiaľ si objednaval?
Ta červená zátka v zadní části není pro vnitřní rozvod vody, ale vizuální kontrola toho, kde se nachází pás na kole. Ten musí být 1-2 mm od příruby kola.
Hi i bought this Saw because i dont have space in my workshop. Sometimes i take the saw with me to place of assembly. This one of the things why i bought mobil version. And actually i dont cut big things and saw blades are cheap. If i had more space i would buy BOMAR Ergonomic 275.230 Or arg 230. Both brands are very good with good quality.
@@Haxterova_Dielna Thank you for your answer. I watched your video but unfortunately I don't understand anything 😋 does the saw always keep the angles and cut evenly?
@@jonaszbarabasz8940 yes cuts are 99,9% straight. If you have good tape measure or other good measure tool you can cut very precisely. With my tape measure i Can cut in decimals. Angles and stops are set well from factory, but after some time it is good check everything and possibly adjust it.
@@Haxterova_Dielna I was afraid of the 13 mm tape because many people say that it will never cut evenly. But this saw has carbide guides, that's why I was interested. Thank you for the information
No už mi prišla🤗 mám z nej velkú radosť je to naozaj krásny sroj síce drahý ale krásny a velmi presný
Paráda Nech slúži 👍
No na tvoje odporúčanie som si ju objendal som zvedavý 😉 verím že budem spokojný
Nech poslúži 👍 ja na tej píle režem či už dosky, tak aj plasty, skrutky všetko čo len príde akurát treba zvoliť vždy kvalitné pásy napr značky pilous a tiež správny zub podľa toho čo plánuješ najčastejšie rezať.
Smiem vedieť, skadiaľ si objednaval?
Ta červená zátka v zadní části není pro vnitřní rozvod vody, ale vizuální kontrola toho, kde se nachází pás na kole. Ten musí být 1-2 mm od příruby kola.
Aha tak 👍 dik za info, ja že to je na to lebo veľa píl má vnútorné vedenie
Super díky 👍👍👍
Hi do you recomended this saw or better spend more money and buy ARG 230 ?
Hi i bought this Saw because i dont have space in my workshop. Sometimes i take the saw with me to place of assembly. This one of the things why i bought mobil version. And actually i dont cut big things and saw blades are cheap.
If i had more space i would buy BOMAR Ergonomic 275.230
Or arg 230.
Both brands are very good with good quality.
@@Haxterova_Dielna Thank you for your answer. I watched your video but unfortunately I don't understand anything 😋 does the saw always keep the angles and cut evenly?
@@jonaszbarabasz8940 yes cuts are 99,9% straight. If you have good tape measure or other good measure tool you can cut very precisely. With my tape measure i Can cut in decimals.
Angles and stops are set well from factory, but after some time it is good check everything and possibly adjust it.
@@Haxterova_Dielna I was afraid of the 13 mm tape because many people say that it will never cut evenly. But this saw has carbide guides, that's why I was interested. Thank you for the information
@@jonaszbarabasz8940 yes, its has, look at the time 16:35
ahoj, šlo by převést výměnu pilového pásu? díky
prave po nej pokukujem a vdaka za videjko ... pomohlo pri vybere , urcite si ju objednam .
Zdarec mam ji ca 5 let super pila.Předešla pila Proma katastrofa.
len doplnim rameno je tiez liatinove. Musi to byt kvoli tuhosti aj sverak
Čoto stoji ?
ahoj nevieš mi dať presný rozmer stola na ARG 130 chcem si vyrobiť stôl
To neviem, ja som to robil podľa oka podľa píly
@@Haxterova_Dielna na pílu čakám preto to zisťujem.
@@tomasmiklovic9449 si ho narežeš na tej píle 😀
To nie 😂 to už musí byť pripravené predom