Lowering the front end of your 2022 hayabusa 3rd gen

Поділитися
Вставка
  • Опубліковано 15 січ 2025

КОМЕНТАРІ • 33

  • @telesleeper
    @telesleeper 9 місяців тому +3

    I heard those clip ons don’t let the bike turn left or right as much as the stock bars did. Do the bar ends hit the tank if you turn full left or right?
    Please let us know.

    • @Epic_G
      @Epic_G  Місяць тому

      @@telesleeper it’s depends on how low u put it if u go more then 3 inches it hits the front plastic a little nothing major

  • @On2sMC
    @On2sMC Рік тому +1

    Bro great video but I do have a question. I just installed the brocks clip-ons, but how did you adjust the forks ? I see the 2 bolts on each side but how did you get to them to loosen and retighten them ? That's a really tight area ? ?

  • @luxurytint7686
    @luxurytint7686 Рік тому

    As low as you went...is the bottom tree garbbing any of the fork?...cause i notice the tubes taper snaller leaving no room for it to full clamp...leaving most the streng to hold bike up on top tree..

  • @K-carbon
    @K-carbon Рік тому +7

    Come on lads put a towel over the paint work pig rough

    • @Epic_G
      @Epic_G  Рік тому

      It’s a track bike bro chill out

    • @paulbrown895
      @paulbrown895 Рік тому +1

      Thought the same thing..lol

  • @johanvanwyk4880
    @johanvanwyk4880 Рік тому

    what are the steps to remove the triple tree, please? i need to remove the 4 bolts but need to flip the handlebars?

  • @aravind1550
    @aravind1550 Рік тому

    What's the seat height after modification

  • @marcusramirez2360
    @marcusramirez2360 9 місяців тому

    Send link were to get clip ons

  • @domingolessa8576
    @domingolessa8576 Рік тому +1

    So in your opinion which is better the Brock’s or the Helibars riser to lower the front? Thanks.

    • @Epic_G
      @Epic_G  Рік тому

      I haven’t use the Brock’s on the GEN3 but I have on the 2nd gen n it’s like the same broke is a little cheaper

  • @drewjones1732
    @drewjones1732 9 місяців тому

    What size clip-ons

  • @javortiz8666
    @javortiz8666 2 роки тому +1

    Ya got big big money

    • @javortiz8666
      @javortiz8666 2 роки тому

      Buck said he ready for you dawgg

    • @Epic_G
      @Epic_G  2 роки тому +1

      Buck better say in HES lane I don’t think nobody in the 717 can keep up

    • @Epic_G
      @Epic_G  2 роки тому

      Ya seen what I did to him the last time we race

  • @leonardoperez5574
    @leonardoperez5574 2 роки тому +1

    We’re can I get this pice to lower my busa 2023

    • @Epic_G
      @Epic_G  2 роки тому

      I’ll go to philadelphia cycle center

  • @euriboyka6784
    @euriboyka6784 2 роки тому +1

    Sir can we fix old front lowering kit from Brock's into new gen please reply sir

  • @joselnegrongonzalez3344
    @joselnegrongonzalez3344 Місяць тому

    Good

  • @JohnBusa1981
    @JohnBusa1981 2 роки тому +2

    So you guys lowered the handlebar? How much lower from the original? Any links to buy the lowering kit?

    • @Epic_G
      @Epic_G  2 роки тому +2

      I lowered it 2 inches and I brought the lowering handlebars triple tree at HTP’s website

  • @jahsaanmajingilane263
    @jahsaanmajingilane263 Рік тому +1

    QUESTION
    Can I just use these clipons WITHOUT lowering the front end itself. I def want my bars a little lower

  • @paulbrown895
    @paulbrown895 Рік тому

    As a track bike or street use not using any kind of loctite going back with your bolts is unbelievable. But "wallah" there you go im not going to be riding it.

  • @Zukilover305
    @Zukilover305 Місяць тому +1

    OMG...Scratch's everywhere...ugg...

    • @Epic_G
      @Epic_G  Місяць тому +1

      @@Zukilover305 nah there was mark left from the black plastic ends but came right off

  • @denniscarparts2294
    @denniscarparts2294 2 роки тому +1

    Too much cook in the kitchen

  • @murraylove3632
    @murraylove3632 Рік тому +1

    What a complete & utter waste of time & money...wow a superbike that hits the road at 140mph after hitting a bump....Suzuki has real engineers that have taken weeks & months to set the bike up to an appropriate height...should have stuck to lowering a Harley...👎👎

    • @Epic_G
      @Epic_G  Рік тому +5

      What type of name is Murray Love smh n yea for a road bike it was perfect but if ur looking at my channel mister Love I race the 1/4 mile n stay out my pockets bro let me do what I want with my money if u don’t like nothing keep it to ur self or don’t look at my channel keep it pushing I don’t need another hater in my life kick rock @MurrayLove 🖕🏼

    • @ivoryboyak1853
      @ivoryboyak1853 Рік тому

      What a weirdo😂 gtf Murray u gets no luv