@@elvincaminero885 yes I followed all the steps. I bought the fog light kit on eBay and it came with the switch, relay and two fog light assembly with bulbs
This procedure also worked for me as I have the traction control switch to the left of the automatic engine shut-off switch (car turns off at light). I always turn the auto-stop switch off so the car doesn't turn off at the light. BUT I hated that the switch was in the 2nd position - I wanted it on the end left. This procedure worked perfectly to get to the switches and move then. I did use a very little oil on the side of the switch housing to get the switches to lock in. Done = 10 minutes. Can't wait to add foglights!
All of the space you'll need to install/remove/place fog lights can be done from underneath. Removing 4-6 pop clips a a 10mm screw (on each side) gives more than enough space. Yes, the car will need to be raised (ramps/lift/stands), but I think that is easier than fiddling with the bumper
I have a 2021 Forester Base Model does it come with the prewiring? Also Is the switch built in already or is that something that has to be done after? Thanks! Also subbed
shane fowker hi did your 2010 Subaru legacy have that switch plug in the wire harness as well or did you have to look for the wire that went to the fog lights as I'm about to put for light on my 2010 Subaru legacy thanks for your response in advance.
Great video. I'm getting ready to install a fog light kit on my 2022 base model. Is it necessary to disconnect my battery? I'm worried about losing factory settings as well as messing with the alarm system.
Hey man I was curious what are relays for, for where their orangish red relays are? I have a 2022 subaru impreza and I’m missing a 5th relay and there are extra plugs by the fog light plugs I’m trying to figure what it is out
Great stuff subbed!! How do you remove the black plastic trim in the sport and up that already have the fog lights, I want to remove the trim so I can tint the lens.
Im here because i want to put themin my '11 legacy. The wiring is what imcgonna need to know and that should be similar to this. Getting them installed is not hard
Anyone know what those wires plugged into the blanks do? Is the 2019 Forester ready to go on some features but you need to swap the blank for a real switch?
Can someone tell me what is the bulb type used for the fog lights? I have been checking my owners manual but it doesn't mention the type, is it H11? H16?
@@DIYCarHunters OK what's the status of the fog light kit? The new company said they didn't have anything, they are demoliton salvors/parts strippers. I have a 2020 Forester Premium. Would the kit fit same as 2019?
Incredible that everything was prewired. Would have never done it if I didn't see this video! Thanks so much. Easy install on 2019 Forester is done.
did you put the relay in the 4 port like he said?
@@elvincaminero885 yes I followed all the steps. I bought the fog light kit on eBay and it came with the switch, relay and two fog light assembly with bulbs
Thank you for this video. Saved me figuring it out on my own and from spending any money on an outrageous installation charge!!
Glad it helped. If you haven't done so already, please subscribe to help us out. Thanks.
This procedure also worked for me as I have the traction control switch to the left of the automatic engine shut-off switch (car turns off at light). I always turn the auto-stop switch off so the car doesn't turn off at the light. BUT I hated that the switch was in the 2nd position - I wanted it on the end left. This procedure worked perfectly to get to the switches and move then. I did use a very little oil on the side of the switch housing to get the switches to lock in. Done = 10 minutes. Can't wait to add foglights!
Thank you for the video! Easy installation, only took about half an hour.
All of the space you'll need to install/remove/place fog lights can be done from underneath. Removing 4-6 pop clips a a 10mm screw (on each side) gives more than enough space. Yes, the car will need to be raised (ramps/lift/stands), but I think that is easier than fiddling with the bumper
I have a 2021 Forester Base Model does it come with the prewiring? Also Is the switch built in already or is that something that has to be done after? Thanks! Also subbed
Great video, very helpful. Have you ever added the USB ports to the rear console? I can't seem to find a video.
Just bought the kit from you and installed! Thanks a ton!
I have a 2018 was so disappointed to find there were no fog lights! I will try this myself!
Great video.. I've done it in a 2010.. this seems even easier !!
Glad you liked it, please help us out by subscribing if you haven't done so already.
shane fowker hi did your 2010 Subaru legacy have that switch plug in the wire harness as well or did you have to look for the wire that went to the fog lights as I'm about to put for light on my 2010 Subaru legacy thanks for your response in advance.
This video is excellent i have one question. I have a 2021 is the relay is in the same place? Please help
Thanks for the video, I just did this on my car, it was really easy.
Thanks for this video. I've seen a couple of ur '19 forester vids now so I sub'ed.
Right on thanks Brian.
This is a great video.. you saved me $100. Thanx...
Glad you liked it, please help us out by subscribing if you haven't done so already.
Amazing! Do yo have a part number for fog switch?
Ebay
Great video. I'm getting ready to install a fog light kit on my 2022 base model. Is it necessary to disconnect my battery? I'm worried about losing factory settings as well as messing with the alarm system.
Does the 2019 Impreza Hatchback/Wagon automatic w/ Eyesight come prewired to install the OEM halogen fog light kit? Thanks
I have a Crosstrek 2023 base model I wonder if it's the same kit and for how much you sell it?
One of those blank wires might have been for steering responsive headlights that did not become standard on all forester trims until 2021.
Hey man I was curious what are relays for, for where their orangish red relays are? I have a 2022 subaru impreza and I’m missing a 5th relay and there are extra plugs by the fog light plugs I’m trying to figure what it is out
Great stuff subbed!! How do you remove the black plastic trim in the sport and up that already have the fog lights, I want to remove the trim so I can tint the lens.
Do you have complete kits for 2021 Forrester?
Are these the same fog lights that come on the newer wrx models?
Hey my people. I have a 2021 Subaru Forester base model but, how do you view the oil life. I tried so many videos but it wont work please help. I
Does the 2016 legacy come pre wired as well?
Have you tried installing a fog light kit on a 2019 legacy? I can't seem to find the extra wiring for fog light button.
Im here because i want to put themin my '11 legacy. The wiring is what imcgonna need to know and that should be similar to this. Getting them installed is not hard
Can i do this on my Subaru Forester 2.5i premium, and is this the same parts too?
What year is your cAr
Are they prewired for heated seats? That's the only thing I want on the base model :(
Which fog light kit is this that you installed? Where can I order? Thank you in advance.
We sell the kit
@@DIYCarHunters Excellent. Do you have a link to the item page? Thank you!
For this video did u have to put a fuse for the foglight locations?
No fuse just a relay
Which clip is it that you used for the fog light assembly? at 6:56ish...
Anyone know where to find the wires for the switch in a 2019 Legacy. They are not where they are shown in this video. On the steering column maybe?
Those fuzzy fasteners are sometimes referred to as a Christmas tree.
Is your forester the base model or the premium trim?
This was a premium model
@@DIYCarHunters Gotcha Thanks
I’m hoping this is just as easy for a 2020 Premium Forester.
@@georgeleyva76 did you install it already?
Is this similar for a 2021 crosstrek?
Does your kit come with the fog light switch and all the hardware
Yes
I just ordered a 2022 base and regretted not getting fog lights but honestly after watching this I do not lol.
What is the Relay model ? I can't find it online for 2019 Subaru Forester . Only find it for 08-17 it’s Same ?
Same as 17-18
Are the Imprezas prewired? I have a 2019
That I don’t know I’ll take a. Look tomarrow my guess is it does but will check
Anyone know what those wires plugged into the blanks do? Is the 2019 Forester ready to go on some features but you need to swap the blank for a real switch?
The more loaded models come with them for the extra options the car has
I have a 2020 forester base model. Looking to buy this fog light kit, are you still selling them?
Yeah we do sell
Them email macninja77@yahoo.com
Hi! Also looking for some fog lights!
Can someone tell me what is the bulb type used for the fog lights? I have been checking my owners manual but it doesn't mention the type, is it H11? H16?
Depends on the year the early ones were h11 later became 16 both work both plug up
@@DIYCarHunters Thanks i got a pair of Led Fog lights (with H11 connector) and it was super easy to change them.
is the 2019 crosstrek base model also pre-wired in the same way?
Yeah should be I’ll have to look
It is not :(
Do you have to aim them? How do you do it?
They come adjusted in the middle I have not personally adjusted any of them but you can if you want
can 2019 forester fog light auto turn on and off?.
Doesn’t seem that they work independently..
I believe if the car did not come with led fog lights then the fog lights turn on after turning on the headlights but don't quote me on that
This company appears to be out of business. The link redirected to another auto salvage business in California.
Company was recently sold
@@DIYCarHunters OK what's the status of the fog light kit? The new company said they didn't have anything, they are demoliton salvors/parts strippers. I have a 2020 Forester Premium. Would the kit fit same as 2019?
@@douglasmarshall5904 same question
How much do you have the kits for?
200