My grandfather was a Seabee in WWII and a master craftsman after. He showed me something very similar to your method almost 50 years ago. To simplify matters, I had a machine shop make me a few chisels of various sizes that did not have handles, but instead had 1/2" diameter or smaller shafts a couple of inches long so I could mount them in the chuck of a drill press. I also had a set made for my grandfather who used them quite a bit, and I got that set back upon his demise. I still have both and have used them many times over the last half century.
Thanks for sharing. My very first pass at this jig twenty-some years ago was to braise an old mortising chisel to a 1/2" shank, then re-temper the chisel. Not as sophisticated as your design, but along the same lines.
@@WorkshopCompanion I know carpentry, not cabinetry and other fine woodworking like you do, but I have been a motorhead since JFK was President, so knew and still know folks with machine shops who have done considerable metal work for me. That's why I defaulted to having one of them make the chisels I wanted. Everybody who has ever seen them (a) thought they were miraculous, and (b) wanted to buy a set. It has surprised me that no one has ever produced them for retail sale. Had the idea been patentable, I would have. However, it would not surprise me if a few folks had some made after seeing mine. You might want to see if you can find a machine shop capable of making them for a price that you could sell them at for a reasonable profit without them being too expensive. Me droog that made my sets said they were ridiculously simple and quick to make. Bar stock on a lathe to turn the shank, mill and bevel the flat surfaces, sharpen the cutting edges, and temper to harden. Ta daaa. Keeping the cutting edge on the center line of the shank would prevent most flexing. Given the size of your audience, I'd bet you could sell quite a few. Many folks would just make their own, but they would love you for having shown the idea to them. I Googled "parts of a hand chisel and there seem to be many that could simply be stripped of their handle and ferrule, and shaping the tang on a lathe might be the only alteration required. I'm supposing you encountered a rectangular or square tang when you explored your add-on shaft method. There have to be many brands with a round tang, and making its diameter uniform would take just minutes on a lathe.
Aren't granddads wonderful? I still have several hand planes passed down to me. I do my best to use their strong character as a measuring stick and try to pass on to my grandchildren (28 and growing) the strengths they both had.
@@johntiefel4248 As with every other category of humans, some are wonderful, some are not. I only knew one of my grandfathers. He was of the "not" variety. So glad to know you are one of the other category. You seem to be the sort of fellow who should have created a platoon.
Sir, your content is so valuable to so many people. You are very engaging, knowledgeable and interesting to watch and the production quality is exceptional. I'm amazed that you haven't been picked up for a regular tv show slot. But then again, I think UA-cam needs to keep people like you on the platform as the value you add is priceless Thank you for all the insight, tips and guidance
The Mr. Rogers of woodworking. Your content is on it's own level. Your character, delivery, and all around knowledge is of deep roots. I enjoy learning all I can from you, all the while being in trance from your entertainment.
Well, you did it again. You keep piling on to my inferiority complex. 75 years old, 60 years in the construction industry, and I would have never thought of using a drill press like that. I can use this tip today.
Man you have more useful and practical information in one ten minute video than any other “woodworking” UA-camr I’ve ever seen on this site. Love these videos so much. This stuff is genius.
😊 I want to tell you how much I appreciate your instruction. "I appreciate your instruction!" I just had surgery for trigger fingers, carpal tunnel release, and triangular fibro cartilage complex repair. I have a small drill press and some 1x4s which need a mortise! Now, I have a trailer to which i can store my tools... I can say now, "Have tools, and I can do anything, anywhere!!!!" Thank you!
I was skeptical of how it was going to work at first, but alas, as always - Nick does not disappoint. This is a pretty great way to cut mortises. I'll give it a try next time I need to make some.
I still don’t understand why this channel doesn’t have over a million subscribers. Probably the best educational woodworking channel i’ve come across yet with extremely valuable info. great production quality too, but the knowledge shared here is invaluable
I've had a Shopsmith for 40 years, also I have many of your books... I'm more a fix it, build it, repair it guy with some wood working skills. In my old house I had a pretty good shop, but now I'm in a Shop/Garage atmosphere learning to make it in a smaller space. I use my Power stand more than my Shopsmith mainly bandsaw, Jointer... I got a second hand Rigid Table saw and spent time tuning it up and it works like a charm. I do enjoy your "you tubes" and learn a lot... it's good to now tie your books to a face... keep up the good work!!!
Outstanding!! I've watching thousands of wood working videos and thought I'd seen every "genuinely" useful workshop tips this is something thing will most definitely build
Thank you sir for someone who shies away from mortise and tenons because I am not very good at it ,this is a fantastic idea. Keep up the good work, and thank you for the way that you teach. 👍
I removed the handle from a chisel with round tang instead of a socket, and then chucked it up in the press. It worked for me. Also, for the cloisenne wire, one could substitute guitar fret wire, which has tangs to grip walls of the groove.
Brass shim stock is available in a variety of thicknesses, and widths. None as narrow as the "wire" that he displayed, but if you intend to do a lot of inlay work, a roll might work out cheaper than the wire. You might also be buying a lifetime supply in one stop.
I was thinking about doing that too.with some old chisels of mine.but wasn't sure if it'd work.glad you helped me make up my mind.ill do that.thank you 😉
You're right, I have a team. Couldn't possibly do this well all by myself. Our producer and editor is Travis Blair, who in addition to being a dynamite filmmaker, is a gifted craftsman in his own right. Heather Knopp is our marketer, and Mary Jane Favorite is everything else. Then of course, at the top of the ladder, there's Bella, our shop dog. We all say sincerely, most welcome.
This press has worked like a charm for my projects ua-cam.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
Wonderful presentation! I really enjoy your pacing and script. Also I'm aware that a Travis Blair is your editor and if they're behind the South Park graphics in the title cards then I'd like to give a huge shout out as those made my day! Looking forward to the next video.
Suggested upgrade: to keep the chisel from popping out upwards, modify the jig with wood screws and a piece of hanger strap to go around the handle at its narrowest point. Protect the handle with a piece of garden hose or other sheet rubber.
This is an ingenious way to incorporate new technology and more traditional knowledge. Also, I hope this comes across as a compliment, but you remind me very much of Maurice from Beauty and the Beast. I once played him in the stage version of the show, and he is my favorite character I ever got to play. Looking forward to learning more from this channel.
@@WorkshopCompanionI trust you take that as a compliment. Whenever I pick up a video of yours, I feel like I am talking to, enjoying the presence of, a trusted uncle who thinks like me. Its a feel good time. I was just thinking prior to coming along your comment, how fun and fulfilling it would be, to live in a village of the kind of people who appreciate you and your videos. The shared values would make for the start of a possibly terrific community.
This is freaking brilliant and i"m ashamed of myself for never even considering it and i've owned a hollow chisel mortise attachment. I"ll add this, go to Harbor Freight and buy a set of their dirt cheap chisels, cut the handles off and attach them permanently to the chuck fixture. I don't have a drill press since I sold all of my stuff prior to a past move, but I plan on buying a benchtop, and I'll be using this chisel mount for sure.
I appreciate how when you do things, you explain everything you are doing. Reasons why and safety tips about what you are doing. I have looked at other channels where they just show what they are doing. They do not explain what they are doing. e.g. talk Could you make a video on how to make homemade t track from wood?
Nice presentation and video! Did not realize or even think about using chisels like this. Great tips and thank you for posting this bit of information!
My grandfather was a Seabee in WWII and a master craftsman after. He showed me something very similar to your method almost 50 years ago. To simplify matters, I had a machine shop make me a few chisels of various sizes that did not have handles, but instead had 1/2" diameter or smaller shafts a couple of inches long so I could mount them in the chuck of a drill press. I also had a set made for my grandfather who used them quite a bit, and I got that set back upon his demise. I still have both and have used them many times over the last half century.
Thanks for sharing. My very first pass at this jig twenty-some years ago was to braise an old mortising chisel to a 1/2" shank, then re-temper the chisel. Not as sophisticated as your design, but along the same lines.
@@WorkshopCompanion I know carpentry, not cabinetry and other fine woodworking like you do, but I have been a motorhead since JFK was President, so knew and still know folks with machine shops who have done considerable metal work for me. That's why I defaulted to having one of them make the chisels I wanted. Everybody who has ever seen them (a) thought they were miraculous, and (b) wanted to buy a set. It has surprised me that no one has ever produced them for retail sale. Had the idea been patentable, I would have. However, it would not surprise me if a few folks had some made after seeing mine. You might want to see if you can find a machine shop capable of making them for a price that you could sell them at for a reasonable profit without them being too expensive. Me droog that made my sets said they were ridiculously simple and quick to make. Bar stock on a lathe to turn the shank, mill and bevel the flat surfaces, sharpen the cutting edges, and temper to harden. Ta daaa. Keeping the cutting edge on the center line of the shank would prevent most flexing. Given the size of your audience, I'd bet you could sell quite a few. Many folks would just make their own, but they would love you for having shown the idea to them. I Googled "parts of a hand chisel and there seem to be many that could simply be stripped of their handle and ferrule, and shaping the tang on a lathe might be the only alteration required. I'm supposing you encountered a rectangular or square tang when you explored your add-on shaft method. There have to be many brands with a round tang, and making its diameter uniform would take just minutes on a lathe.
Aren't granddads wonderful? I still have several hand planes passed down to me. I do my best to use their strong character as a measuring stick and try to pass on to my grandchildren (28 and growing) the strengths they both had.
@@johntiefel4248 As with every other category of humans, some are wonderful, some are not. I only knew one of my grandfathers. He was of the "not" variety. So glad to know you are one of the other category. You seem to be the sort of fellow who should have created a platoon.
Pretty brilliant. I wonder how some high grade bolts would work if forged square and ground
This continues to be my favorite woodworking channel. I learn something useful every time.
Kind of you to say. We try.
Sir, your content is so valuable to so many people. You are very engaging, knowledgeable and interesting to watch and the production quality is exceptional. I'm amazed that you haven't been picked up for a regular tv show slot. But then again, I think UA-cam needs to keep people like you on the platform as the value you add is priceless
Thank you for all the insight, tips and guidance
The Mr. Rogers of woodworking. Your content is on it's own level. Your character, delivery, and all around knowledge is of deep roots. I enjoy learning all I can from you, all the while being in trance from your entertainment.
Thanks for your kind words.
Well, you did it again. You keep piling on to my inferiority complex. 75 years old, 60 years in the construction industry, and I would have never thought of using a drill press like that. I can use this tip today.
Sorry about that...but glad to have been of some use.
Man you have more useful and practical information in one ten minute video than any other “woodworking” UA-camr I’ve ever seen on this site.
Love these videos so much. This stuff is genius.
Thanks for the kind words.
I have neither a drill press or chisels, but I still found this very interesting 🙂
Me to😢
I saw the thumbnail and said to myself "what could possibly go wrong!" but then I saw the old man and said "yeah, this man knows what he's doing"
😊 I want to tell you how much I appreciate your instruction. "I appreciate your instruction!"
I just had surgery for trigger fingers, carpal tunnel release, and triangular fibro cartilage complex repair. I have a small drill press and some 1x4s which need a mortise! Now, I have a trailer to which i can store my tools...
I can say now, "Have tools, and I can do anything, anywhere!!!!"
Thank you!
I feel your pain. I've had nine of my ten fingers surgerized. Carpal tunnel seems to be a common ailment among long-time woodworkers.
I was skeptical of how it was going to work at first, but alas, as always - Nick does not disappoint. This is a pretty great way to cut mortises. I'll give it a try next time I need to make some.
Thanks for saying.
I still don’t understand why this channel doesn’t have over a million subscribers. Probably the best educational woodworking channel i’ve come across yet with extremely valuable info. great production quality too, but the knowledge shared here is invaluable
Nice of you to say, but don't worry -- we're on our way.
I've had a Shopsmith for 40 years, also I have many of your books... I'm more a fix it, build it, repair it guy with some wood working skills. In my old house I had a pretty good shop, but now I'm in a Shop/Garage atmosphere learning to make it in a smaller space. I use my Power stand more than my Shopsmith mainly bandsaw, Jointer... I got a second hand Rigid Table saw and spent time tuning it up and it works like a charm. I do enjoy your "you tubes" and learn a lot... it's good to now tie your books to a face... keep up the good work!!!
Outstanding!!
I've watching thousands of wood working videos and thought I'd seen every "genuinely" useful workshop tips this is something thing will most definitely build
Oh good grief! YOU ARE AWESOME! Thank you so much for sharing your wisdom! This is priceless! Greetings from Plymouth 🇬🇧
Thanks for the kind words
Thanks for bringing smiles to the woodworking community.
You guys are a great audience.
Great advice. Love the south park style illustrations.
Thank you sir for someone who shies away from mortise and tenons because I am not very good at it ,this is a fantastic idea. Keep up the good work, and thank you for the way that you teach. 👍
Most welcome.
I was lukewarm on the idea until the wire inlay piece. Now I'm sold on building one.
I sincerely love everything you put out.
I laughed so hard when he said to make sure the drill press is unplugged, or things could get "wildly exciting". 😂😂
Cleverest jig I have seen in a long time. Impressed!
Thanks.
So glad I’ve found this channel. Thank you!
Most welcome.
I removed the handle from a chisel with round tang instead of a socket, and then chucked it up in the press. It worked for me. Also, for the cloisenne wire, one could substitute guitar fret wire, which has tangs to grip walls of the groove.
Fret wire would give a different result. It would stand proud of the surface because it is T-shaped.
Brass shim stock is available in a variety of thicknesses, and widths. None as narrow as the "wire" that he displayed, but if you intend to do a lot of inlay work, a roll might work out cheaper than the wire. You might also be buying a lifetime supply in one stop.
I was thinking about doing that too.with some old chisels of mine.but wasn't sure if it'd work.glad you helped me make up my mind.ill do that.thank you 😉
A chisel chucked in the drill press would cancel any wobble also... I like it... God bless
Absolute Genius! Love to watch Nick performing creative magic ....
And we love to have you watch. Thanks for saying.
Nick is a great teacher. This is coming from a teacher, so you can trust me.
Thanks.
Clever , very clever!
This guys a maverick.
I really like this grandpa.❤
That's an amazing idea, you have a very flexible mind to come up with something like that.
My wife would agree. She often tells me I'm bent...;-)
love the south park style of animation for you and your dog!
Thanks -- we have it done in Ukraine!
Just learnt I can lick the plug to ensure all the electricity is out! Great video!
Thanks. Be sure to wash your plugs from time to time.
This is a stroke of genius
Thanks.
You certainly have a wealth of knowledge under those gray curls. Thanks for the information
Most welcome.
Ok, that was novel. Fantastic share. Thank you.
Never to old to learn new things. Thank you so much. Love it... Best regards from Norway.
Nick you are fantastic
Keep up the good work
Thanks for the kind words.
This channel is always a goldmine of information, delivered in a refreshing way which helps embed the learning.
Good of you to say.
I've supposedly been doing this as a hobby for a few years now. I'll be damned if this didn't humble me! Thanks so much for these awesome videos!!
Most welcome.
Very cool!!! Never would have thought of that. Love the South Park character of yourself!
Thanks!
I will certainly sharpen my wood chisels and blow the dust off my drill press now. Ingenious, Thanks
Most welcome.
Everytime I watch one of your videos I learn something new. Thank you (and your team?) for your experience and your love to share all this knowledge.
You're right, I have a team. Couldn't possibly do this well all by myself. Our producer and editor is Travis Blair, who in addition to being a dynamite filmmaker, is a gifted craftsman in his own right. Heather Knopp is our marketer, and Mary Jane Favorite is everything else. Then of course, at the top of the ladder, there's Bella, our shop dog. We all say sincerely, most welcome.
Okay that's really clever.
Great video.
OUTSTANDING!
Just found this channel, thank you all mighty algorithm. Very cool video!
Thanks.
Fantastic!
Now I really need to come up with a need for a mortice. 😀
If you have a collection of round pegs, they're always needing square holes. Or is it square pegs in round holes...;-)
Best woodworking video I’ve ever seen, hands down. Entertaining and informative. Love it!
Thanks.
This is absolutely brilliant
This was terrific.
Neat jig Nick. Your videos are always so informative and user friendly to watch. Bit of humor is great also!!
Thanks.
mate i can listen to you for hours you make amazing videos and you are one hell of host thank you
Most welcome.
Great idea, Herr Engler!
Very clever!
Best drill stand trick ever, Thanks
You are so good teacher ! Also funny at the same time. Regards
I'm from the UK thanks Nick always informative and great tips 👍
Most welcome.
You have
E always been one of my favorite wood workers always new ideas
Thanks for saying.
Every time I watch your videos it brings me so much joy. It's a true pleasure to learn from your years of experience. Thanks
Most welcome. Those were very kind words.
That is an awesome little jig!!! 10/10
Thanks.
First video from this channel that I've seen. Thank you UA-cam algorithm.
Good info, great presentation; and obviously loves dogs. So I subscribed.
Thanks. Bella says welcome.
sweet jig man. I knew there had to be more I could do with my drill press.
👍
MIND BLOWN!!! thanks for sharing this.
Most welcome.
Now that is trick. Thanks for posting that.
Most welcome.
Pretty cool, thanks
What a wonderful idea. Making one tomorrow
Brilliant as always. And thank you for your kind attention 🌞
Most welcome.
That is just downright brilliant!!
Great on the inlay, thanks.
Thanks as ever for sharing your expertise. The new animations made me chuckle too. Cheers.
Cheers back.
Genius!! Thanks for the tips!
Very interesting stuff, thanks for upload.
Cheers from Poland 🍻
Cheers back from Ohio.
This press has worked like a charm for my projects ua-cam.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
fascinating and informative sans fluff and gimmickry. Keep up the great high level content!
Will do.
Nice jig!
That's so clever I'm surprised I didn't think of it. 😆🤣😂
3:52 " Just wait till nobody's looking..." very funny!
thats an interesting way to use a drill press, i have never seen it used like this
Fantastic! I wish I knew this about 3 weeks ago!
It's absolutely vital to make sure all the electricity has leaked out before using this jig. Safety first! 😊
Make sure you wipe up the puddle on the floor. You don't want to slip. Safety First.
I have a special insulated broom just for these sorts of clean-ups. There's no more annoying shop clutter than stray voltage. As always, safety first.
I hope there is no capacitor in the system. The result could be shocking.
Great video.
Excellent information!!!
Thank you for sharing!!!
Wonderful presentation! I really enjoy your pacing and script. Also I'm aware that a Travis Blair is your editor and if they're behind the South Park graphics in the title cards then I'd like to give a huge shout out as those made my day! Looking forward to the next video.
The animations were Travis' idea, and they are produced by an artist in Ukraine.
I love watching your videos. Thank you.
We love having you watch them. Most welcome.
thank you great idea will make mine
Suggested upgrade: to keep the chisel from popping out upwards, modify the jig with wood screws and a piece of hanger strap to go around the handle at its narrowest point. Protect the handle with a piece of garden hose or other sheet rubber.
This is an ingenious way to incorporate new technology and more traditional knowledge. Also, I hope this comes across as a compliment, but you remind me very much of Maurice from Beauty and the Beast. I once played him in the stage version of the show, and he is my favorite character I ever got to play. Looking forward to learning more from this channel.
Interesting. Like Maurice, the majority of the inhabitants in my little village also consider me to be insane.
@@WorkshopCompanionI trust you take that as a compliment. Whenever I pick up a video of yours, I feel like I am talking to, enjoying the presence of, a trusted uncle who thinks like me. Its a feel good time. I was just thinking prior to coming along your comment, how fun and fulfilling it would be, to live in a village of the kind of people who appreciate you and your videos. The shared values would make for the start of a possibly terrific community.
@@LitoGeorge That sounds a lot like William Blake's city of poets and dreamers, "Golgonooza."
One of the most clever ideas I have ever seen. :)
Thanks.
Seems like a perfect job for the old hand press/arbor/keyway cutter.
Less spinny things to go wrong
True. If only old hand press/arbor/keyway cutters weren't as rare as hen's teeth these days...
this is interesting but I'm old school. I actually enjoy doing joints by hand. I will admit that I do have a mortiser in my shop but I rarely use it.
Mind = blown!
This will help me so much in my work!
Glad to have been useful.
Great idea !
Dear sir you are amazing! i love watching your videos and learn something new every time. Greets from the Netherlands 👍
Greets back from Ohio.
Thank You.
This is freaking brilliant and i"m ashamed of myself for never even considering it and i've owned a hollow chisel mortise attachment. I"ll add this, go to Harbor Freight and buy a set of their dirt cheap chisels, cut the handles off and attach them permanently to the chuck fixture. I don't have a drill press since I sold all of my stuff prior to a past move, but I plan on buying a benchtop, and I'll be using this chisel mount for sure.
Thanks for sharing.
Interesting,I finally got a drill press after only having a belt sander for many years. Its lots of fun. 🤗
"...the round and round part..." -- I actually used that phrase when at a loss for words in a discussion about my drill press with my wife... LOL
I was a big fan of the Flying Mortise Brothers Band, including the lead singer, One-Eye Larue.
I appreciate how when you do things, you explain everything you are doing. Reasons why and safety tips about what you are doing. I have looked at other channels where they just show what they are doing. They do not explain what they are doing. e.g. talk Could you make a video on how to make homemade t track from wood?
Nice presentation and video! Did not realize or even think about using chisels like this. Great tips and thank you for posting this bit of information!
Most welcome.
The magic of a perpendicular