Great video my friend! We hope to see you next winter somewhere in Australia. We hope to bring more RydeCulture products to Australia for all your Indian riders.
Whoahhhh Mate howdy. I am SO glad we were able to meet, now I have one question…..why am I just now discovering that you also post videos? 😂 again my friend it was an awesome day we had at the dealership in Waynesville and sharing lunch and making lifelong MEMORIES. Hope our paths cross again before our time here is up🤘😎
Hello mate and I'm so glad you found me. Yes I'm some what the quite one out of us two lol. Thank you and I was my absolute pleasure in meeting you too. Please enjoy my videos as there will be more to come.
It was a shame we were not able to catch up but you have an amazing trip in Europe with the family. Yes I must say our tastes are similar. Thank you. ☺️
@@roadtripperozadventures I think I'll buy em for mine as well. I get a little concerned that on a very hot day or two, the adhesive will let go on these lights. Any issues with yours so far? You're in a hotter climate than Tassie, that's for sure
@@roadtripperozadventures will that's heartening to hear, in a way. Certainly gives one motivation for getting it located 1st time. Leaves me wondering if a temporary jig fixed to the pannier to guarantee alignment would be wise. I guess my suggestion of temporarily adding a spacer to the pannier lid might be all that is needed.
@@Hipporider Personally I didn't need to but I totally understand where you are coming from. I would close the top-box lid fully and place the lights on an angle under the lip of the lid as you present them to the back of the panier. This will automatically give you and even space when you straighten the lights up as you adhere them onto the box of the panier bag. I hope that made sense.
Looks great. Always nice when the farkles on the bike are tasteful. I’ve seen some less attractive mods that make bikes look like a kid sticky taped junk from the gutter on to their BMX. This isn’t that. Nice work.
I just installed my set here in Belgium. However, mine are out of sync. First my originals go on and off, and while they are off the bag lights go on and of.. At the same time it looks kinda nice actually, if you can imagine what i mean but at the same time i want them to be in sync like yours !
yeah ive talked to them. Hopefully we can work it out. Also in contact with my dealership to see if a simple ecu flash would do the trick or something. If not, well, like i said it doesnt look bad that way either @@roadtripperozadventures
thank you for the video Sir. you were very thorough. Question for ya, those clear lens brake lights, are those aftermarket or did they come with the Jack Daniels Challenger? I'm looking for a set or 2 to put on my Pursuit and my Jack Daniels Springfield Dark Horse. I like how 1/2 light up for turn and full light up for brake, not to mention the clear/smoked look when off.
Hi Greg, that's a great video to be done and I hope you don't mind me pinching your idea and produce such video. Quickly the reason I changed form a RM to a Challenger was, performance. The challenger felt more responsive in the higher rev range and also felt lighter even though its not. The challenger feels like a lighter bike when you're pushing it around corners. The one think I miss though is the beautiful looking features of the RM and the motor looking like a piece of art. I hope that helps and keep an eye open for such video. Damian
Thanks for replying. Can't wait to see the video. I noticed a 111 primary cover on your wall, don't forget to let us know if the performance issue was with the 111 or the 116
Nice install. Trick with accessories is making them look like they belong there. These do that nicely.
I agree. I normally wouldn’t put these kind of accessories on my bikes but these look like they should be there from OEM.
Great safety upgrade, those lights 🇦🇺
Definitely do. Makes a big difference.
Sweet looking bag lights! Love the fact that they function. Thanks for the video! 😎👍
Thank for your comment and I’m glad you liked it.
Great video my friend! We hope to see you next winter somewhere in Australia. We hope to bring more RydeCulture products to Australia for all your Indian riders.
Looking forward in see more products in Australia.
I like those lights attached to the side of the bags as well. I saw them featured on Riding Fish's channel. 🇦🇺
When i saw them at Sturgis, i thought straightaway how good they are.
Those look really good. I have the Custom Dynamics one on my Chieftain and am really happy with them. I do like the design of these.
Thank you and yes I’m happy with them too. I’ve always liked the chieftain.
Great video - thank you. Just bought some today!
Oh wow fantastic. I think you will enjoy them, they look great. I will be doing more accessory video shortly.
@@roadtripperozadventures Excellent... I'll be looking out for it.
Whoahhhh Mate howdy. I am SO glad we were able to meet, now I have one question…..why am I just now discovering that you also post videos? 😂 again my friend it was an awesome day we had at the dealership in Waynesville and sharing lunch and making lifelong MEMORIES. Hope our paths cross again before our time here is up🤘😎
Hello mate and I'm so glad you found me. Yes I'm some what the quite one out of us two lol. Thank you and I was my absolute pleasure in meeting you too. Please enjoy my videos as there will be more to come.
Big difference, nice work!
I’m overdue to do something similar. ✌️
They really light up which means there’s no excuses for someone to run up my ass 😂
Great stuff... you are very clever!!! McGyver xxx
Thanks…yes I think they look great xx
They come up a treat Damian 😎👌
Thanks BB. Easy add on for extra safety.
I have not met you yet, i missed yout trip to the states.. but i can tell you have good taste!! 💪 💪 good work!!
It was a shame we were not able to catch up but you have an amazing trip in Europe with the family. Yes I must say our tastes are similar. Thank you. ☺️
@@roadtripperozadventures, we will all meet up, when the time is meant to be!!
A temporary spacer between the bag lid and the lights while attaching them, might make alignment easier and more reliable 🇦🇺
That would be a great idea. Two foam pads on each wand would do the trick.
@@roadtripperozadventures I think I'll buy em for mine as well. I get a little concerned that on a very hot day or two, the adhesive will let go on these lights. Any issues with yours so far? You're in a hotter climate than Tassie, that's for sure
So fare no issues with the adhesive giving up. Actually tried to move one of them after fitting it and it was on for good lol
@@roadtripperozadventures will that's heartening to hear, in a way. Certainly gives one motivation for getting it located 1st time. Leaves me wondering if a temporary jig fixed to the pannier to guarantee alignment would be wise. I guess my suggestion of temporarily adding a spacer to the pannier lid might be all that is needed.
@@Hipporider Personally I didn't need to but I totally understand where you are coming from. I would close the top-box lid fully and place the lights on an angle under the lip of the lid as you present them to the back of the panier. This will automatically give you and even space when you straighten the lights up as you adhere them onto the box of the panier bag. I hope that made sense.
Looks great. Always nice when the farkles on the bike are tasteful. I’ve seen some less attractive mods that make bikes look like a kid sticky taped junk from the gutter on to their BMX. This isn’t that. Nice work.
Thanks mate. I think they look good too or I wouldn’t have put them on my bike. Nice addition.
I just installed my set here in Belgium.
However, mine are out of sync. First my originals go on and off, and while they are off the bag lights go on and of..
At the same time it looks kinda nice actually, if you can imagine what i mean but at the same time i want them to be in sync like yours !
Just Message the guys at Rydeculture and I know they will help you out. Let me know how you go.
yeah ive talked to them. Hopefully we can work it out. Also in contact with my dealership to see if a simple ecu flash would do the trick or something. If not, well, like i said it doesnt look bad that way either @@roadtripperozadventures
thank you for the video Sir. you were very thorough. Question for ya, those clear lens brake lights, are those aftermarket or did they come with the Jack Daniels Challenger? I'm looking for a set or 2 to put on my Pursuit and my Jack Daniels Springfield Dark Horse. I like how 1/2 light up for turn and full light up for brake, not to mention the clear/smoked look when off.
Thank you. They are aftermarket lights and they are manufactured by Rydeculter. Super nice guys and simple to install.
@@roadtripperozadventures do you have a link or email? I found the website but could not find the lights. Just the saddlebag lights. Thanks
@@Wrexhavik did you find the link?? Sorry as I wasn’t sure if I answered your question.
G'day, Have you done a Road Master vs Challenger video? I can't seem to find it if you have. I'd love to know why you changed bikes.
Hi Greg, that's a great video to be done and I hope you don't mind me pinching your idea and produce such video. Quickly the reason I changed form a RM to a Challenger was, performance. The challenger felt more responsive in the higher rev range and also felt lighter even though its not. The challenger feels like a lighter bike when you're pushing it around corners. The one think I miss though is the beautiful looking features of the RM and the motor looking like a piece of art. I hope that helps and keep an eye open for such video. Damian
Thanks for replying. Can't wait to see the video. I noticed a 111 primary cover on your wall, don't forget to let us know if the performance issue was with the 111 or the 116
@@gregjacques3159 will do and for the record I did a big bore upgrade from 111 to 116.
where did you get the round clear lens signal lights?
They came with the Jack Daniels bike. Standard issue from Indian mate.