StunterX Frame Unbox and Review K5 GSXR 750
Вставка
- Опубліковано 13 жов 2022
- It's finally arrived! My 2022 k5 Suzuki GSXR 750 StunterX Stunt frame. In this video, I unbox and review the craftsmanship of the StunterX group and discuss some of the details of this bike rebuild. The overall goal in this bike rebuild series is to take my K5 GSXR 750 from salvage to a clean title.
My Website: www.thechemistdiy.com/
Help My Channel Grow!
***************************************************************
Hey guys, if any of my videos have saved you a buck or two consider hitting that thanks button or use the PayPal link below to donate one of those saved dollars to my channel. Any contribution is greatly appreciated. If you can't donate, please consider watching a commercial to show your appreciation for all my hard work.
THANKS - The Chemist
PayPal Donate Link:
www.paypal.me/thechemis
*********************************
Support my Channel Through Amazon
*********************************
As an Amazon Associate, I earn from qualifying purchases at no cost to you. Your purchases using my affiliate link bring in added funds so that I can continue to bring you valuable content such as these helpful DIYs and product reviews.
All products shown in this video were purchased with my own money and no money was exchanged for a favorable review. All product reviews and tech tips are my opinion and should be taken with a grain of salt, I am not a licensed mechanic.
********* Products Shown *****************
Visit My Amazon Store for products shown in this and other videos I have created as well as the camera gear I used to make these videos.
www.amazon.com/shop/thechemist - Навчання та стиль
🔥🔥🔥 need to see that thang on her brother
Hey bro I have a question? Im not getting power to my fuel pump relay? I have jumped my fuel pump so I know it's running! The bike is telling the pump not to turn on? I have also checked the ignition switch and the resistor inside is working! Can you please help? 05 gixxer 750 just like your bike
I want one now.. going to get the frame, swing arm, and sub frame. Do my whole bike.. f4i.. all grey!!
Nice, have to admit it takes some getting use to. Can't really explain it but it's a different ridding experience. That bike is a lot more stiffer meaning it has less flex on hard angle leaning/turns. You wouldn't think you would notice such a thing but you do. Almost like starting over learning how to ride.
If I noticed it with just the frame replacement then I'm wondering what it would feel like with a complete set-up such as your doing.
@TheChemistDIY I'm surprised that you noticed it that much, but that good to know. I have a 905 cage and I'm guessing that isn't going to fit. I will most likely reach out to them and see if I can get a deal price. But it makes sense that with the complete steal frame there would be no give at all.. must be a weird feeling
@@JaredJensen-rj8zq yeah Jared from StunterX had mentioned this me before buying. Didn't really think much of it when he stated.. it was one of those ya ya.. moments, lol. But once you've get use to riding something you know how it's suppose to feel and yes it's a bit different.
Hey Jerad had gave me some discount codes at the time of making this video.. mentioned my channel and tell him I sent you.. maybe he'll have something to offer you in ways of a discount.
I still have to cut up my video footage of my build.. just haven't had time. But more to come in the StunterX Build..
Def can't wait to see her with the setup!!!
Hey how long did it take to arrive, I’m getting ready to buy a 2016 R6 frame from them and would like to know !
The purchase was made at the beginning of June. My frame didn't arrive till October, so about 4 months. I believe it would have arrived earlier if they didn't run into those issues I had discussed in the video. When you make your order let Jerred know you saw my video and sent you his way. I can't speak to the longevity of the frame but the quality seems to be pretty top-notch. I just received my MCO paperwork and will be making a video on that shortly. Make sure you tell him your engine size so it can be added to the MCO title.
@@TheChemistDIY thanks for the fast reply ! Happy riding 🙌
@@biscostuntz5930 Anytime bro. Good luck with your purchase and build. hope to see you at the next video.
This doesn’t need any welding to be done right ?
Nope, it all bolts together
Sounds good thanks for the quick reply , how’s it holding up ? I’m looking to get one for my 600RR , also do you know the price difference front the front and back half ?
@@vq_phil so the frame is holding up pretty well, it was easy to assemble the two halfs with the four screws provided. The frame is pretty rigid and feels a bit different when riding from the OEM aluminum frame and it takes a short bit to get used to.
I have to the whole build recorded but haven't got around to editing it.. Maybe I'll get to that soon.
It's a bit of a pain to register but I know how to do it now. Basically it's a called a special construction bike from that point forward.. the month and year that your frame was made now becomes your new year. So my 05 Suzuki GSXR 750 is now a 2022 stunner x, model x with O miles even though the clock has the 98k original miles.. Your also going to need special construction insurance.. Basically there is no blue book value because it's not your typical known Manufacturer so there are no comparables.. the value is what you say it is.. and you have to take it to the CHP to confirm on paper before getting registered with DMV.. so it's a lot more than just buying a frame and installing.
CHP kept my old frame. Not sure if it was because it was salvaged but none the less they kept it before I could cut the lower off to get core ky deposit ($300) back from StunterX.. if you do go this route just hit me up and I'll walk you through it..
@@TheChemistDIY awesome. so it is possible to use the OEM back half with a front stunter x frame without major fabrication ? It doesn’t look like it from pictures . And I realllllly don’t wanna pay another like 1k for the back half lol but sweet bike should get around to some more content definitely gained a sub and appreciate it
@@vq_philyes, but there going to fabricate it all for you. All you need to do is decide weather you want to supply them with your lower by cutting yours apart and shipping it to them.. OR.... Letting them purchase one from a yard ($300) and fab it all up. it's much easier to let them handle and then ship them your lower once complete for a $300 core refund.
Like I said, CHP kept my frame which I wasn't expecting. Had I known that.. I would have cut the lower off my frame and just gave them the upper half with the VIN info.. that's all CHP is really after.. not sure how that works with none salvaged bike tho.. this was only my situation.
No content in 3 months? Where u at buddy
Sorry brother, I got excepted to attend a 3 month Cyber Security course. The work load is insane and it's hard to manage anything else. I have one video coming.. working on editing now.. hopefully I'll have time this weekend.
@@TheChemistDIY I understand that grind 🦾 💰
gsx r750 k8 has error c28/c29. I soldered 4 points as shown in the video you showed. Error c28 is gone, but error c29 is still there. Can you help me?
ua-cam.com/users/shortsvDTQFITligc
Did you disconnect your secondary throttle position sensor which is attached to the STVA when u performed the repair.. Did you make sure it's reconnected when you reinstalled everything?
@@TheChemistDIY Phil R
For sure man ..Also .. I’m probably going to make a video on this because I haven’t seen one .. if your getting c28/29 code and you fix this and still get a c29 code and hear your throttle body clicking when you turn on ignition .. your secondary butterfly’s are over extended and stuck . U can fix this near your throttle cable on the left side .. U have to move the butterfly’s where they can operate free
@@TheChemistDIY he showed me how to fix it but i don't know where it is