Great Video, I had banging sounds when I had the vent on, my problem only cool air would come out of vents, but sounded like the same component, the blend door actuator, replaced it and have full control again thanks again.
Hi Kelley, glad the blend door actuator took care of your problem. Interesting thing is once they went to electrical components vs vacuum controlled components, reliability has gone down. Let me know if you have any other issues. Thanks again for watching.
Hi, my car is only blowing warm air when the ac is on and hot air when the heat is on. We recharged the ac and it was blowing cold for a few days and now is back to warm air. My car also makes a knocking sound where the blend door is located and it makes this noise when changing the temperature. I'm looking for answers on whether this could be a blend door issue or a leak? Would it have blown cold air after the recharge if it were a blend door issue?
Could be low refrigerant, enough to allow Pressure switch to turn on compressor, as you said compressor is coming on, but low enough to not cool well. Yes condenser would be my next choice.
@@donjulio7330 my video pertained to the blend door actuator, that controls airflow over the heater core or evaporator. Your issue sounds as though it’s related to compressor or evap. I’m working on a video for diagnostic of this. Thanks for watching.
In my case, the part failed in the hot position, so no matter what I did with the temp control it stayed hot. It could also fail in cold position, or possibly somewhere in between. You can hear the position moving I believe when you change from cold to hot. But either way if you don’t have Control over temp it could be your problem. Even with AC off you should be able to select full hot and cooler, “vent” air.
Great Video, I had banging sounds when I had the vent on, my problem only cool air would come out of vents, but sounded like the same component, the blend door actuator, replaced it and have full control again thanks again.
Hi Kelley, glad the blend door actuator took care of your problem. Interesting thing is once they went to electrical components vs vacuum controlled components, reliability has gone down. Let me know if you have any other issues. Thanks again for watching.
Hi, my car is only blowing warm air when the ac is on and hot air when the heat is on. We recharged the ac and it was blowing cold for a few days and now is back to warm air. My car also makes a knocking sound where the blend door is located and it makes this noise when changing the temperature. I'm looking for answers on whether this could be a blend door issue or a leak? Would it have blown cold air after the recharge if it were a blend door issue?
My air blows warm air on cool and hot air on hot , didn’t find any leaks, ac compressor is working could it be the condenser?
Could be low refrigerant, enough to allow Pressure switch to turn on compressor, as you said compressor is coming on, but low enough to not cool well. Yes condenser would be my next choice.
@@rltkktlr how did you know that was the part causing the problem, I seen people say it’s the evaporator temperature sensor?
@@donjulio7330 my video pertained to the blend door actuator, that controls airflow over the heater core or evaporator. Your issue sounds as though it’s related to compressor or evap. I’m working on a video for diagnostic of this. Thanks for watching.
Not getting full power to my fuse box in my 2014 Chevy equinox
I’m getting warm and cold air any idea what that can be
In my case, the part failed in the hot position, so no matter what I did with the temp control it stayed hot. It could also fail in cold position, or possibly somewhere in between. You can hear the position moving I believe when you change from cold to hot. But either way if you don’t have Control over temp it could be your problem. Even with AC off you should be able to select full hot and cooler, “vent” air.
Any luck Christopher getting it fixed?
Only half of my fuses are working in my Chevy equinox 2014
Hi Anthony, is your blower motor one of the fuses that are not working?