Well fine JT , that hydraulic filter element is the same as the 1200/1250 , slightly different housing tho , get your self sum decent heavy duty axle stands 👍👍👍 Dave
A suspect rear main seal turns out to be 2 cheap plugs. Congratulations on your continuing good fortune on purchasing projects that are easy fix. Thanks for entertaining us all
Interesting theory on how she ended up in the junkyard, sounds plausible. Whatever, it's in the best place now; even in this crazy world, sometimes good things do come to good people!
Really coming along, JT. I'm glad Nolan's is helping you, with your hard to find parts. I used to pass by there, all the time, when I was care-taker at the game area. Can't believe I never thought to suggest them to you.
Both of those 1150's at the end looked cool but I think the one with duals looked cooler. Once you got it all done up in new paint you should play Lady In Red for it. Also, Christmas is slowly sneakin its' way here, I think a shiny MF Ski-Whiz would be a perfect gift for the wife for when the snow falls. 😁
Tractor cleaned up good will really be sharp when painted, you said something about putting a 4 bottom plow behind it wound not know that anything was hooked to it in the Sandhills and coastal part of N.C. it would pull a model 880 plow 6 to 7 bottom 18 inch plow easy can't wait to see it finished a quality peace for sure
JT, looks like Santa needs to bring you a case of break cleaner and a Massey red shop roller stool..thanks again for the time shared with all who watch..be safe.
Great job ! I accidentally bought a M35a2 Duece and a half with winch, 17k m at auction for $1800. Description said does not run and had a pic of l/s of engine covered in oil. After having played around with these trucks for a while, I kinda knew the prob . After charging the batteries, she cranked right up after sitting for 9 yrs ! The rear canister oil filter was pouring oil out at the gasket, where someone tried to fix with 'orange' permatex. I just snugged it down and drove her home ! You have a good eye of keeping it simple and not over looking the details ! Hello to Fluffy !
Excellent video JT :) yes safety be 100 % on any work anyone does and glad your be safe take in steps to ! Also this tractor be super beautiful and gorgeous when done ✔ Lol also get horn honk when pass by you on drive on road to feilds plus high five waves too Lol !
When I worked in the oilfield, we used a water based soap with a lot of caustic soda in it. Our cement slabs would get pretty oily and this stuff changed them to white. Wish I could remember who made it.
@@jtsbarnngrill6873 It was supplied by a chemical company so you’d have to look at an industrial supplier. I know it would burn your skin if it got on you!
Chip Evans here, glad you could work out a deal with Nolts farm equipment. When I saw that nose cone in the back room ,I was like hell yeah. Good for you.
I cut up the cardboard cases that fridges etc come in and put them under the work to keep the oil off the floor also some large tree rings are good for props
Hey JT, Hello from Germany, this is my first comment on UA-cam. I really like the way you‘re doing this and I like Massey Ferguson, because we have two at home(one is a 35 and the other is a 65). Hopefully you came up with a lot more videos around MF and the Farm stuff. Greetings
JT, like u had stated before, "once u have painted the 1150 frame, it will look great from a mile away" It is a farm tractor, not a show tractor.. Fluffy will like-it..
It amazes me every time you start that 1150. It starts and runs so easy. I’ll bet your right on what someone thought the problem were. The thing is now the older big horsepower tractor are getting more popular. Farmers are getting tired of computers and def fluid and not being able to work on their own tractor. Btw, I noticed how dirty your jeans were, bet your wife gets pissed when you come in from the shop.
Good one J T , yes their is a lot of preparation work in getting the M F 1150 ready to paint . She will look great , in the end result . When your finished painting .
JT, you have to feel good at the end of the day! You have functional tractors that don't require DEF and/or have to "Regen". Imagine being in the middle of a damn field, in the high of work season, and your tractor De-rates. You are easily thousands of dollars ahead.
Surely this beauty wasn’t scrapped because of these minor issues. I already commented on previous videos that this is a find that just doesn’t happen. Anyway looking forward to see you showing her show tender loving care. Why oh why don’t you put cardboard on that pristine concrete floor before you start digging apart dirty oily things. 😂 Enjoy your weekend JT
Hey JT, You are the Man .Another great job, those plugs just are unreal. I'm glad you left one tire on the tractor, things have been known to fall off the blocks 😊
It's amazing to see the amount of equipment still available. There are so many scrap yards here on the Eastern Shore you bet it headed to the scrap yard! Playing hooky from work. Watched the football game. Ravens fan. After that game the beer tasted like? I'm not going to work tomorrow!
Oh boy, Nolans farm equipment, I could tell you stories, brothers' coworker has a son who works there, hope the best for you, Looking good from the Buck & Doe Ranch JD approved. 🤠
That tractor will look great,I wish I had done the same thing with my dad's B-250 international tractor which he bought brand new in 1958 but when I sold the family farm sadly it had to go.
That's a great tractor. I know you will make it look great, JT. I'm doing the same thing with my 330 IH utility. It's a lot of work making something like that look good.
My 1150 has huge inner wheel weights that bolt on the back of that inner rim piece. My rear tires are 600 /38. I started it up after sitting all winter. My clutch wouldn’t disengage. Had to start it in gear drove it around for awhile and it became unstuck.
JT, I think you are getting enough equipment I would definitely switch to 55 gallon barrels. Expensive but cheaper in the long run. I hope you like me spending your money 😊
Closed center hydraulics. Worked great but dealers hated it. Deere had a similar system but did not have pressure control. Pressure control whopped everyone anytime anywhere regardless of implement.
I once installed a carburetor with 3 input points for the fuel line, and left one with a plastic cap. Only took an hour or so to look to the off side and see the 'leak'.
Massey and Allis Chalmers have power shift wheels they are easy to do Shift the wheels out wide you can walk and paint inside along the frame that's easier than removing the wheels
good morning jt if you get a chance to get some scrap 2x4 or 2x6 build yourself some 12x12x12 cribing they store easy and are great blocking very strong and quite stable have a great day
I can’t wait to see it when you’re finished with it, I know it’s gonna look awesome like always. I’m needing to build another barn for storage at the new house and I was wondering what size your shop is there. It seems like you’re happy with it and I’m trying to save a little money if I can. And I’m assuming your shop there would be cheaper than building a regular pole barn
@@jtsbarnngrill6873 Hi JT... I have the manual for the MF 165. I can send you pics through email. Or how ever you want to get the info so I can send them to you if that works.
Nice one j.t. your just getting more luck than I even known I can't believe it. I have turn volume down now and just watch now. She will look good when done great job. Would you ever pick up a 135. And square fenders aswell. From Andy in uk
@jtsbarnngrill6873 nice one that was one tractor I started to drive every day when I was 8. Had a 35x but had to park on the hill all the time farmer wouldn't do wiring or new starter so didn't ues it much because just had to leave running all the time driven most off all old tractors over here right to the newer ones. I miss it but nothing I can do about it now. That's why I like you and your chanel because it's all old. Keep the grate work.
@@jtsbarnngrill6873 ya with the idiots in the green house and the taxation on the electric companies now that we pay for. Give old AL Gore some back when he flies over head
Well fine JT , that hydraulic filter element is the same as the 1200/1250 , slightly different housing tho , get your self sum decent heavy duty axle stands 👍👍👍
Dave
Right on! Thanks Dave!
A suspect rear main seal turns out to be 2 cheap plugs. Congratulations on your continuing good fortune on purchasing projects that are easy fix.
Thanks for entertaining us all
Right on
Interesting theory on how she ended up in the junkyard, sounds plausible. Whatever, it's in the best place now; even in this crazy world, sometimes good things do come to good people!
Thank you!
You definitely have a gift for older tractors and I love it!
Thanks 👍
Can't wait to see the finished product. It's coming along nicely.
Thanks!
Great progress on the 1150. You’re the best channel for knowledge on Massey Tractors for sure. Keep them coming. Thx
Thanks, will do!
You are a jack of all trades. Great videos and love the Masseys.
Thanks 👍
Really coming along, JT. I'm glad Nolan's is helping you, with your hard to find parts. I used to pass by there, all the time, when I was care-taker at the game area. Can't believe I never thought to suggest them to you.
Right on!
Both of those 1150's at the end looked cool but I think the one with duals looked cooler. Once you got it all done up in new paint you should play Lady In Red for it. Also, Christmas is slowly sneakin its' way here, I think a shiny MF Ski-Whiz would be a perfect gift for the wife for when the snow falls. 😁
Right on! She definitely needs one 😉
Great video again dude. Love them old Masseys. Can not wait to see her complete. Thanks for sharing.
You and me both!
Tractor cleaned up good will really be sharp when painted, you said something about putting a 4 bottom plow behind it wound not know that anything was hooked to it in the Sandhills and coastal part of N.C. it would pull a model 880 plow 6 to 7 bottom 18 inch plow easy can't wait to see it finished a quality peace for sure
Right on. Thanks!
Good Morning JT!! Another great video!! That was a heck of a find !! Super awesome acquisition my friend!!
Thanks 👍
I still can't believe somebody scrapped that tractor. Nothing on that tractor indicates it had a hard life. Their loss, your gain.
Bingo!
JT, looks like Santa needs to bring you a case of break cleaner and a Massey red shop roller stool..thanks again for the time shared with all who watch..be safe.
Great job ! I accidentally bought a M35a2 Duece and a half with winch, 17k m at auction for $1800. Description said does not run and had a pic of l/s of engine covered in oil. After having played around with these trucks for a while, I kinda knew the prob . After charging the batteries, she cranked right up after sitting for 9 yrs ! The rear canister oil filter was pouring oil out at the gasket, where someone tried to fix with 'orange' permatex. I just snugged it down and drove her home ! You have a good eye of keeping it simple and not over looking the details ! Hello to Fluffy !
Right on! Thank you!
Excellent video JT :) yes safety be 100 % on any work anyone does and glad your be safe take in steps to ! Also this tractor be super beautiful and gorgeous when done ✔ Lol also get horn honk when pass by you on drive on road to feilds plus high five waves too Lol !
Right on! Thanks!
@@jtsbarnngrill6873 welcome JT :) !
Great job JT, it will be very cool, I like the vise grip size 😂
Right on👍🏼
Love the ending, it will be glorious 😂😂
Thanks!😆
Looks like you got the old Massey going in right direction have a great weekend.
Thanks, you too!
When I worked in the oilfield, we used a water based soap with a lot of caustic soda in it. Our cement slabs would get pretty oily and this stuff changed them to white. Wish I could remember who made it.
I’ll have to look for it!
@@jtsbarnngrill6873 It was supplied by a chemical company so you’d have to look at an industrial supplier. I know it would burn your skin if it got on you!
JT, just a thought....a farout thought: put a set of Massey Kardashian tires on the ass end of the 1150. She'll be the bell of the field. LOL
If I had an extra set I definitely would!
Chip Evans here, glad you could work out a deal with Nolts farm equipment. When I saw that nose cone in the back room ,I was like hell yeah. Good for you.
Thank you for recommending them! It just arrived here today!!!
Good to hear nolts farm equipment had one for you I get alot of parts there
Can't wait to see this beast in new paint
Right on!
I cut up the cardboard cases that fridges etc come in and put them under the work to keep the oil off the floor also some large tree rings are good for props
Right on!
Hey JT, Hello from Germany, this is my first comment on UA-cam. I really like the way you‘re doing this and I like Massey Ferguson, because we have two at home(one is a 35 and the other is a 65). Hopefully you came up with a lot more videos around MF and the Farm stuff.
Greetings
Thank you!
She's goung to look great in the villages here in England we have tractor rallies a beauty like that would be queen of the ball
Thank you
Fine job again JT she's going to look really good 👌👍
Thanks!
You got lucky with that 1150 find. Looking forward to the finished product 👌
You and me both!
Looking good J T really like ur working videos ,
Thanks 👍
JT, like u had stated before, "once u have painted the 1150 frame, it will look great from a mile away" It is a farm tractor, not a show tractor.. Fluffy will like-it..
Right on! She approved lol
Great prep work video JT. Looking forward to seeing the finished product. KEEP ON FARMIN! 🤜🤛
Thanks! Will do!
I like the shape of that era MF's, they are awesome
They are good lookin machines!
Great job, goin love the finished product lol
Thanks 👍
Safety is the keyword every good operation
Bingo!
It amazes me every time you start that 1150. It starts and runs so easy. I’ll bet your right on what someone thought the problem were. The thing is now the older big horsepower tractor are getting more popular. Farmers are getting tired of computers and def fluid and not being able to work on their own tractor.
Btw, I noticed how dirty your jeans were, bet your wife gets pissed when you come in from the shop.
I have my own designated washer 😆😆
@@jtsbarnngrill6873 yes you do!
@@jtsbarnngrill6873you got a gas powered Maytag? That's another thing to start collecting 😊.
Love the enthusiasm. Love masseys. Great work. Uk veiwer
Awesome! Thank you!
Good one J T , yes their is a lot of preparation work in getting the M F 1150 ready to paint . She will look great , in the end result . When your finished painting .
Can't wait! Thanks!
Keep putting out those videos, I enjoy seeing the progress and the finished product 😂
Thanks! Will do!
The 1150 is looking wonderful. Nice job JT.
Thanks!
JT, you have to feel good at the end of the day! You have functional tractors that don't require DEF and/or have to "Regen". Imagine being in the middle of a damn field, in the high of work season, and your tractor De-rates. You are easily thousands of dollars ahead.
Right on!
Hey Joe,,finally got back to ya. You have the damdest good luck lately. Must be doing the blue mountain respect just right!!
Thanks!
Amazing job jt👍that tractor will absolutely beautiful when it done ✅ it runs like a dream it sounds very sweet 👌cheers from down under 🇦🇺
Thanks 👍. Cheers!
Great rescue!!
Thanks!
Good job JT! She's gonna be nice!!
Thanks!
Surely this beauty wasn’t scrapped because of these minor issues. I already commented on previous videos that this is a find that just doesn’t happen. Anyway looking forward to see you showing her show tender loving care.
Why oh why don’t you put cardboard on that pristine concrete floor before you start digging apart dirty oily things. 😂 Enjoy your weekend JT
Right on! Thanks!
I agree it is a lot of work to prep for paint. Hours and hours. Nice job it will look almost new.
Thanks 👍
your good at what you do😊😊
Thanks!
Another great video!! Thank you ! So looking forward to seeing her done
Coming soon!
Hope to see the sweet 1150 disc up after your get those 37 bushel beans picked, prepping the ground for next year's 42 bushel an acre
Right on! That is what I’m hoping for also!
The sound of the 1150 is awesome. Great find
Thanks 👍
You are quite the artist at making a great patina on the shop floor.
I try😆😆
Great job man, your tractors always end up looking awesome! Every stain on that floor comes with a story and marks and accomplishment.
You got that right!
hope you never run out of lucky stars..you deserve a star or 3...gotta dig good luck and a quuick comparison..
Right on😆
Hey JT, You are the Man .Another great job, those plugs just are unreal. I'm glad you left one tire on the tractor, things have been known to fall off the blocks 😊
Right! I did not want that to happen to me!
Grandpa showed me to use anti-seez on the stickers and ID plates so you don't risk damaging them when you pull tape off
Right on
It's amazing to see the amount of equipment still available. There are so many scrap yards here on the Eastern Shore you bet it headed to the scrap yard! Playing hooky from work. Watched the football game. Ravens fan. After that game the beer tasted like? I'm not going to work tomorrow!
😆😆😆
The chrome panels over the exhaust manifolds will clean up pretty well using Mr. Clean magig erasers.
Right on!
I was thinking maybe using rubberized undercoating on the floorboards and the steps???
That would be effective
@@jtsbarnngrill6873if you could get it match the red i would consider doing the 3 point as well
I'll bet your glad all the grease & oil clean off is done. I agree it looks ready for paint.
That's going to give it a clean look.
Right! Made a huge difference!
I took a maintenance day yesterday. Today it’s time to watch Barn n Grill!
Right on!
Oh boy, Nolans farm equipment, I could tell you stories, brothers' coworker has a son who works there, hope the best for you, Looking good from the Buck & Doe Ranch JD approved. 🤠
Thanks 👍. I appreciate it!
This tractor is going to look awesome not to mention you don't have much in her.
Right!
Thanks J.T.
Your video's are great to see.👍👍
Go on.!
I wish you and your familie a nice weekend and up to the next video.
Greetings.
🤠🇳🇱
Thank you!
Thanks JT for another great video, can’t wait to see the next one!
You do such a great job redoing the paint on all the equipment
Thanks!
I see you had to get the metric wrenches out for the hydraulic filter 😂
😆😆. I did lol
That tractor will look great,I wish I had done the same thing with my dad's B-250 international tractor which he bought brand new in 1958 but when I sold the family farm sadly it had to go.
Right on!
Goodmorning
I was waiting for another video
Hope you enjoyed it!
@@jtsbarnngrill6873 I enjoy all of them
It’s amazing what a brake cleaner bath can do for old oily equipment.
Right on!
Looking good. Thanks for posting JT
Any time!
That's a great tractor. I know you will make it look great, JT. I'm doing the same thing with my 330 IH utility. It's a lot of work making something like that look good.
It is! But worth it in the end!
Nice job my friend, keep it up.
Thanks, will do!
I understand good video thanks
Thanks!
Maybe having four jack stands is safer than wood blocks 😉
It would be!
Great buy. 😊
Thanks! 😊
My 1150 has huge inner wheel weights that bolt on the back of that inner rim piece. My rear tires are 600 /38. I started it up after sitting all winter. My clutch wouldn’t disengage. Had to start it in gear drove it around for awhile and it became unstuck.
Right on. That happens 😉
JT, I think you are getting enough equipment I would definitely switch to 55 gallon barrels. Expensive but cheaper in the long run. I hope you like me spending your money 😊
😆. A barrel would be the best way for me to go!
@@jtsbarnngrill6873brake cleaner, too!
Closed center hydraulics. Worked great but dealers hated it. Deere had a similar system but did not have pressure control. Pressure control whopped everyone anytime anywhere regardless of implement.
Right on!
Yeah another jt Massey vid just in time for lunch break 👍👍
Hope you enjoy!
A tracjak would make life easy, let the tractor do the lifting.
I once installed a carburetor with 3 input points for the fuel line, and left one with a plastic cap. Only took an hour or so to look to the off side and see the 'leak'.
Right on!
JT, Ole Girl’s coming along. Can’t wait to see her completed. Are you close to harvesting your corn crop?
My first planted soybean field is about 2-3 weeks out.
Get some saw dust if you can to absorb the spilled oil. You are doing a fine job.
Right on!
Friday and a new video! WOOOOOHOOO!
Yeah!!
Sitting here in line at the elevator (Bunge) in Memphis with our first load of soybeans watching JT ..
Nice! I’m hoping to start in 2-3 weeks here
You inspired me to paint my 1155. It is done. Do what I did and buy yourself some jack stands. Not very expensive and will last you your lifetime!
Right on! 😊
Looks like you should invest in some jack stands. They are cheap and are pretty stable. More stable than piling 3X3's up.
Yep
Love it bud! Could you give us non-massey folks a detailed video on what each tractor has? Like HP-gears-weight and tire size kinda details? Thanks
Sure thing!
Massey and Allis Chalmers have power shift wheels they are easy to do Shift the wheels out wide you can walk and paint inside along the frame that's easier than removing the wheels
Yep.
good morning jt if you get a chance to get some scrap 2x4 or 2x6 build yourself some 12x12x12 cribing they store easy and are great blocking very strong and quite stable have a great day
Right on!
JT all the injector pumps on them V8s were updated when the CAV pumps failed even on the 2000 series
Right on!
You should make some stands that bolt on the front hubs and the back centers
I should
It will look great. Plus she isn’t gonna be a barn/parade queen either you will put her ass to work some. She is gonna be beautiful
Right on! Thank you!
I can’t wait to see it when you’re finished with it, I know it’s gonna look awesome like always. I’m needing to build another barn for storage at the new house and I was wondering what size your shop is there. It seems like you’re happy with it and I’m trying to save a little money if I can. And I’m assuming your shop there would be cheaper than building a regular pole barn
Mine is 24x32x16
Ok thank you sir
Super video bay on Hot croatia
Right on!
@@jtsbarnngrill6873👍👍👍🏻👍🏻✊️✊️
Looking good. Do you need some manuals for a MF 165?
Wouldn’t hurt to have one
@@jtsbarnngrill6873
Hi JT...
I have the manual for the MF 165.
I can send you pics through email.
Or how ever you want to get the info so I can send them to you if that works.
I have a P.O. Box on my channel description page
Farrah Fawcett 👍🏻👍🏻👍🏻👍🏻👀
👍🏼👍🏼👍🏼
Nice one j.t. your just getting more luck than I even known I can't believe it. I have turn volume down now and just watch now. She will look good when done great job. Would you ever pick up a 135. And square fenders aswell. From Andy in uk
I may be getting a 135 in the future. My dad has one that doesn’t see much use anymore
@jtsbarnngrill6873 nice one that was one tractor I started to drive every day when I was 8. Had a 35x but had to park on the hill all the time farmer wouldn't do wiring or new starter so didn't ues it much because just had to leave running all the time driven most off all old tractors over here right to the newer ones. I miss it but nothing I can do about it now. That's why I like you and your chanel because it's all old. Keep the grate work.
You need some Heavy Jack Stands
That’s for sure
Boss put together a used oil burner for the coming winter, use it gets colder than a well diggers ears.
Right on!
@@jtsbarnngrill6873 ya with the idiots in the green house and the taxation on the electric companies now that we pay for. Give old AL Gore some back when he flies over head
i have great luck with purple power degreaser/cleaner and its pretty cheap in 2 gallon jugs
Right on!
Need to find a set of bolt on duals for it now
Right!!