OMG. I've always taken 5 stitches to start but have done them right on top of each other! Thank you for teaching me the right way. And I'll hang on tight to my threads when starting too. 5 mins in and I've ready learned so much!
I missed this one originally. Great info. I came here today from your FB page post. I have been considering joining the Advantage group...and this one firmed my decision. 😊
I find myself in the same boat lately with my new since September longarm. Some days are great, and others, well not so much! It was helpful to me to see Im not alone, so thank you for that. I do know to try one thing at a time and Im learning as I go. I enjoy watching your videos, they are helpful.
Wow Susan!!!!! Thank you so much for this educational video. How to properly tie off and bury your threads. All this time and I have been trying to Figure it out. Finally now to practice. you are awesome.
Thanks so much! It's one of the very few that I've designed myself and I'm fairly proud of it❤ If you do want the pattern, it's in my Etsy shop StitchedBySusan2015.
Thanks for this informative video. I'm a newbie. Have done 2 quilts on my HQ Simply Sixteen using groovy boards. Had a thread breaks every row or 2 on 1st quilt but only 1 on 2nd quilt. New needle and slower. Happy with that. But had more bobbin run outs and never considered end of bobbin tension issue. Oh well, beginner charity quilts.
Susan, the quilt behind you features the Crazy Eight design. I’m taking an online challenge and used the Crazy 8 design on a wide border. I’ve indicated several times that I learned it from you. (I call it nesting wishbones.) Thank you again for showing this design, I still need to perfect the crossover area. Yours creates a secondary design that I love!
Susan…I had another thought about your thread breaks. You mentioned previously about your top tension being around 4+. My machine came at 4.5 and I had a LOT of breaks. I dialed it back considerably and without goofing up my tension (still sitting between the batt) it has actually fixed my problem. You also mentioned the dead bar height possibly being the problem. I thought about that and my question would be ‘why would they permit us to raise/lower it if it is specifically supposed to be at a certain measurement?’ I don’t think that’s it because I too use Red Snappers and raised my bar almost immediately after getting my machine. I’m going to keep thinking on this because I KNOW how frustrating it is!
I'm still puzzling over this one...because I do love those Red Snappers! Interesting detail, BERNINAs now come with tension thread at 4.0 as the default. I do love that as a longarm manufacturer, they're making improvements.
Oh thank you for showing this, its so hard sometimes to figure these things out. Visuals are so great. I do have a question for you, ma'am. Starting is not a problem, but when I stop on my little Moxie, it's very difficult to pull the thread away to get the end tail, to pull up the bobbin thread again. Any idea why that would be? Learning so much from you, thank you for sharing your knowledge.
Do you have a presser foot that lifts? If so, lift that first, and that releases the top thread from the tension discs and allows it to pull more easily. Not all longarms have that tho.
You’re such a great instructor, Susan! Your detailed thought process narration is invaluable. I’ve seen so many videos that show a process but never explain the why - I need that for the instructions to stick. You give me confidence that someday I’ll be a skilled longarmer! Thank you for sharing your amazing expertise!
@@StitchedBySusan oh my, thanks for replying. I'm slowly going through all your videos! I don't think the presser foot lifts, but I will definitely check that! Thank you!
Hmmm, don't think I have. Mostly because I try to complete a project, and doing anything custom at all starts to ramp up the time of the episode. Maybe my quilting friends WANT to watch for 5 hours 🤷♀
This is such a great video. However, I left a long thread and my bobbin still not coming up. I’m using a domestic machine with no up and down needle button
Are you hanging onto the top thread at the same time? If so, then try re-threading, and maybe even review your machine manual. Every machine with a bobbin will work essentially the same way, to be able to pull up the bobbin thread. If you don’t have a needle up/down feature you can turn the hand wheel.
I just love this video. It has helped me so much. I keep it in my playlist. Of course I have a question. It looks like you have several layers of fabric under the purple fabric. What adjustments do you make for that? Did you lower your foot pressure, lower your rails or change the tension.
Thankyou for being real in your quilting journey. I love the thought of watching others have struggles as we all do. It's comforting.
So true!
My aunt and I have learned so much from you. We love your videos! Thank you for your time teaching us.
You're so welcome!
OMG. I've always taken 5 stitches to start but have done them right on top of each other! Thank you for teaching me the right way. And I'll hang on tight to my threads when starting too. 5 mins in and I've ready learned so much!
Woohoo!
Me too. That’s the way I was taught. Ugh. Hope my stitches haven’t been coming out.
Catching up on a sunny Sunday!
You are the best I always learn a new tidbit when I watch your show.
This is a really great tutorial--I didn't know exactly how to bruy my threads. Now, I know! Thank you so much, Susan.
You are so welcome!
Thank you for explaining why you bring the bottom thread to the top. I have seen this over and over but never knew why.
I learned this initially when I was quilting on my domestic, but I think the same principle applies.
Glad I found you again. and I am subscribed but get no notifications
I'm guessing it's a setting on your device regarding notifications.
I missed this one originally. Great info. I came here today from your FB page post. I have been considering joining the Advantage group...and this one firmed my decision. 😊
Very much enjoyed this and learned so much in my machine quilting journey! Thank so much.😊
I find myself in the same boat lately with my new since September longarm. Some days are great, and others, well not so much! It was helpful to me to see Im not alone, so thank you for that. I do know to try one thing at a time and Im learning as I go. I enjoy watching your videos, they are helpful.
One of our sons often says, “Some days, she do be like that!”🤣
Wow Susan!!!!! Thank you so much for this educational video. How to properly tie off and bury your threads. All this time and I have been trying to Figure it out. Finally now to practice. you are awesome.
Sometimes it’s the little things, right? Glad you found this helpful!
Thanks for this informative video! I’m a newbie longarmer and this is so helpful! ❤
That is a beautiful quilt behind you. 😊
Thanks so much! It's one of the very few that I've designed myself and I'm fairly proud of it❤ If you do want the pattern, it's in my Etsy shop StitchedBySusan2015.
Hi from Slovakia.
Thanks! Your videos are super helpful!
Love your sons voices
Thanks so much for such an informative video!
Thanks for this informative video. I'm a newbie. Have done 2 quilts on my HQ Simply Sixteen using groovy boards. Had a thread breaks every row or 2 on 1st quilt but only 1 on 2nd quilt. New needle and slower. Happy with that. But had more bobbin run outs and never considered end of bobbin tension issue. Oh well, beginner charity quilts.
Oh yes! First whole bunch of quilts have a learning curve! I hope my videos help with some of the "ordinary" questions and decisions.
Susan, the quilt behind you features the Crazy Eight design. I’m taking an online challenge and used the Crazy 8 design on a wide border. I’ve indicated several times that I learned it from you. (I call it nesting wishbones.) Thank you again for showing this design, I still need to perfect the crossover area. Yours creates a secondary design that I love!
Thank you! And I appreciate the mentions when you use it❤️
Susan…I had another thought about your thread breaks. You mentioned previously about your top tension being around 4+. My machine came at 4.5 and I had a LOT of breaks. I dialed it back considerably and without goofing up my tension (still sitting between the batt) it has actually fixed my problem. You also mentioned the dead bar height possibly being the problem. I thought about that and my question would be ‘why would they permit us to raise/lower it if it is specifically supposed to be at a certain measurement?’ I don’t think that’s it because I too use Red Snappers and raised my bar almost immediately after getting my machine. I’m going to keep thinking on this because I KNOW how frustrating it is!
I'm still puzzling over this one...because I do love those Red Snappers! Interesting detail, BERNINAs now come with tension thread at 4.0 as the default. I do love that as a longarm manufacturer, they're making improvements.
Good tips! I like that ruler with the "Handle." Is that available on the retail market? Thank you!
It is! There’s a link for Quilter’s Apothecary in the description below the episode. There’s a code for 10% off too.
Oh thank you for showing this, its so hard sometimes to figure these things out. Visuals are so great. I do have a question for you, ma'am. Starting is not a problem, but when I stop on my little Moxie, it's very difficult to pull the thread away to get the end tail, to pull up the bobbin thread again. Any idea why that would be? Learning so much from you, thank you for sharing your knowledge.
Do you have a presser foot that lifts? If so, lift that first, and that releases the top thread from the tension discs and allows it to pull more easily. Not all longarms have that tho.
You’re such a great instructor, Susan! Your detailed thought process narration is invaluable. I’ve seen so many videos that show a process but never explain the why - I need that for the instructions to stick. You give me confidence that someday I’ll be a skilled longarmer! Thank you for sharing your amazing expertise!
@@StitchedBySusan oh my, thanks for replying. I'm slowly going through all your videos! I don't think the presser foot lifts, but I will definitely check that! Thank you!
Hi I am from Wyoming.
Have you made a video regarding border quilting specifically?
Hmmm, don't think I have. Mostly because I try to complete a project, and doing anything custom at all starts to ramp up the time of the episode. Maybe my quilting friends WANT to watch for 5 hours 🤷♀
This is such a great video. However, I left a long thread and my bobbin still not coming up. I’m using a domestic machine with no up and down needle button
Are you hanging onto the top thread at the same time? If so, then try re-threading, and maybe even review your machine manual. Every machine with a bobbin will work essentially the same way, to be able to pull up the bobbin thread. If you don’t have a needle up/down feature you can turn the hand wheel.
@@StitchedBySusan Thanks for responding. I think I was holding both, but I’ll try again.
Hi Debe from Tiny Ontario
S000000many tips!!!!!!
I just love this video. It has helped me so much. I keep it in my playlist. Of course I have a question. It looks like you have several layers of fabric under the purple fabric. What adjustments do you make for that? Did you lower your foot pressure, lower your rails or change the tension.
Hmmm, I don’t think I had any extra layers, just the backing batting, and purple fabric.
Rockport TX