21 ARDUINO Precise Control of Stepper Motor with TB6600 Driver | TB6600 and Arduino | TB6600
Вставка
- Опубліковано 24 вер 2024
- 21 ARDUINO Precise Control of Stepper Motor with TB6600 Driver | TB6600 and Arduino | TB6600
This tutorial will show you how to use the TB6600 Driver to control the position, speed, and acceleration of Stepper Motors with Arduino.
Stepper motors are controlled by a driver, which sends the pulses into the motor causing it to turn. Stepper motors are used in flatbed scanners, computer printers, plotters, slot machines, image scanners, compact disc drives, intelligent lighting, camera lenses, CNC machines, 3D printers, etc
TB6600 is an easy-to-use professional stepper motor driver, which can control a two-phase stepping motor. The TB6600 micro-stepping driver can be used to drive two-phase bipolar stepper motors. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.
The TB6600 driver can be used to control quite large stepper motors with a maximum current of 3.5 A continuous. Do not connect stepper motors with a current rating of more than 3.5 A to the driver.
The stepper driver supports speed and direction control.
APPLICATIONS:
The TB6600 stepper motor driver module applications are;
Antennas.
Setting the position of stepper motors.
CNC (computer numerical control) machines
3D printers.
High-level applications.
Controlling speed, position, and direction of rotation of stepper motors.
DSLR and Video Cameras.
ATMs.
Engraving machines.
ETC.
Your queries:
Your Searches:
motor driver arduino
tb6600
TB6600 stepper motor driver
TB6600 stepper motor driver with Arduino
diy
arduino
cnc
stepper motor
arduino nema 23 stepper motor
how to use stepper motor with arduino
stepper
motor
steppermotor
accelstepper
accelstepper library
library
control
electronics
serial communication
terminal
electronic motor
tutorial
education
lecture
demo
demonstration
TB6600 stepper
microstep
microstepping
power supply
nema
nema17
nema23
nema32
#AutomationControlSolutions
#RoboticArm
#StepperMotor
#TB6600
I have 2 of these drivers and I must say they are both very quiet in operation and run the nema 23 steppers extremely well. Great video
Thanks dear
Very cool, really enjoyed the video.
Thank you very much!
Can the ENA and DIR inputs be supplied by more than 5V? Will it work with 12V?
These are signals, and I recommend that you should also use 5 volts as from microcontroller.
Hello, i have same arduino uno board and tb6600 driver i upload blink and grbl file and its uploaded my grbl controller ugc run perfectly as show in computer but driver not receiving any signal from arduino board ...what should i do please tell me
Hi,
Before making any connections or disconnections, power must be removed from the device and the controller. Failure to do so will void any and all warranties.
First, check the driver separately, if it is okay, then check the connections.
Because the driver is sensitive, and the wrong wiring can damage it.
Also check GRBL Settings for driver.
Thanks