Based on the mostly negative feedback for the "premier" feature, I cancelled it and made the video live. I thought it was kind of cool to be able to chat with the viewers, but I probably will not try it again.
@@WatchWesWork It is pinned to the top... and it would have been nice to chat with you while you rolled a video out. Doesn't have to be for every video, but every once in a while it is nice to connect with real people.... ahh the internet. The crossroads of ineptitude and impatiences.
Some background, that you may, or may not be aware of, regarding premiere and backlash to the feature. The premiere feature is part of a few changes the current and unwanted CEO of UA-cam designed in order to transition YT from what it was to a fully paid site (think NetFlix but worse). She's been having a go at it for years now with four failed renditions of the same project, just changed the name each time and threw a fresh coat of paint on top. Recently however, she and her minions have begun altering the entire platform, one feature at a time, not just content with failing in their side of YT where they threaten certain content creators to post content or go dry out when the "algorithm" has a hiccup on their vids. And whilst some of the people are aggravated because of the waiting time when the video pops out, most of the hate for that feature stems from there. Sidenote, i know some are crossed that we'd suggest what UA-cam should do with their own website, but everyone should keep in mind that our situation is akin to what happens with indentured servants (near slavery) in China. Content creators have little to no say in where the website goes, money is made off their backs and a very small fraction of that sum is sent back, now, by machinations of the CEO, even less than it used to be. I'm of course talking about the engineered adpocalypse, something that started with 3 "journalists" from WSJ (Wall Street Journal), who invented a story at the behest of the CEO, because no sane person would ever put things in perspective (with help from a bit of google-fu and online article from neutral sources) and think otherwise considering not only did they support the cruel remarks of those 3 stooges(when they were fully aware of what was happening), the CEO also met with WSJ to make a cover story for the whole situation "thanking" them for it, something no CEO would ever do. Or normal human being, i doubt someone would meet with their aggressor for a chit chat after the fact. WSJ got their minute of fame, the CEO managed to introduce new rules and regs that not only curtailed the rights of many to post things (historic channels, political debates etc) but also cut a substantial chunk of the ad revenue. Whilst it might sound as tin-foil talk, trust me this is all based on fact and observation.
Yep I don't like it and worse for you the dislike actually sticks even when the video gets published (changed to like now ) just very annoying that it's on my list+notification and not watchable just a waste of a tap
Pretty cool to see an old Insley run. I am one of the owners of the parent company that used to own Insley and I personally ran the facility that last made them in Minnesota called Badger equipment. Ironically I noticed you mentioned a Pierce governor, it just happens that our company owned Pierce as well. I am glad to see someone get one of these old girls running again. Looks like fun.
I'm looking for a track drive shaft/sprockets/bearings for a Hein Werner C14, I think it used the Insley crawler. Any chance you know where I can get one?
Thank you I absolutely love this project. I had the good fortune at age 17 to operate a very old link belt drag line. It was the same size as much I can now recall. It had been converted to be just a crane. The original engine had been repowered to a 400 cat diesel. Your crane is much newer in design. The link belt I operated had large drum and brake system with esentric yoke the sinched a brake band around the drum. All functions where controlled by three or four levers. There were piped coming straight up out of floor of the cab. Chains with bull rings came up through the center of the pipes. You would pull up on the rings and rotate them 90 degrees and perch them into different cut outs on the interior walls of the tubes to change the functions of the levers. There 2 or 3 petals on the floor also. One I distinctly remember held the lift cable. I and another guy took turns hooking and operating the crane. We were standing under 10000 pound steel boxes of fine ground ceramic brick dust. Ron was a Vietnam Army Corp of Engineers Veteran. We had to trust one another not to lift off of that cable brake pedal while the hooker was removing the door locks at the bottom of the containers. They called them jim boxes cause the material came from a johns and mansfield fire brick plant. We used it as a filler for a product that was applied to the walls of underground coal mines to seal them and also it had something in it that would detect methane gas by turning color. Just like I notice your house movement the levers get pulled and you have to catch them and push or pull them the opposite way. The crane I ran was a different animal everyday because of the temperature and humidity. The bands would grab or slip. You had to use both hands or it could get away from you. I being young and Ron being used to crazy dangerous stuff from the war, we made a good team. Sorry to go so long you brought back some very good memories. Thank you again.
Wes, give those jerks no mind. I have COMPLETELY enjoyed your efforts in all of the 3 vlogs. The reason they balk at your efforts is that they can't open a beer and fart at the same time. There's many more that like the videos than not. KEEP UP THE GOOD WORK!
I agree 100%. Don't give the negative Nancy's the privilege or honor of one single word from your mind or response. We are all learning here and your taking your valuable time to share with us. I speak for myself and I'm sure many others thank you for your time and efforts. Looking forward to more on this old INSLEY IRON HORSE
I remember these old drag lines, 62 years ago i was 13 years old , my dad has a friend named Moon Smith that had a dirt pit. I would sneak over there and watch him dig dirt . One day he ask me to come on up and set in this iron seat and run this thing.. I was so scared that thing rattled and shook when you pulled those levers. Old Moon would just laugh when i made it swing to the right and left and make the boom go up and down . Dragging the bucket in was with dirt was something else you had to do 3 are 4 thing all at the same time ?? I guess that's why we love your old video's , they bring back a lot of old memories .. Thank You so much.. I rang the bell ??
I learned on a 22-B Bucyrus with a clam bucket charging an asphalt in RVN in the Army. I was all OVER the sky the 1st time I tried running it and swinging. Just get in it and have at it. Got better as time went on. Made a good living with a drag bucket after I got out. Nothing like one of the old rigs. And I don't blame Moon. Might as well laugh as to cry!
106,000 views 800 comments in two days should tell you Wes that we like watching your detailed real life make it happen repairs. No matter what you tackle you give it your best and you are not afraid to say "that didn't work". I assure you 99.9% of us viewers will never see or be around n INNSLEY Crane so this is cool old schools technology and we like it.
Post'em and I'll watch'em!! As mentioned, love to see old iron brought back to life. Realize it's not $$$ practical, especially when missing parts either.
my father had one of these old draglines,it only had a 40ft boom and a 3/4yd bucket,but it worked, we had a continental in it from the beginning but i remember dad replacing it with a automotive 6cly ,,and it worked! he taught me how to operate it when i was 16yrs old!!! we were in fremont michigan,,"Fremont Gravel and construction company" got my ass chewed many times for dumping the dirt on top of the cab of the dump truck before I got good enough to load the truck,"got tired of the ass chewings!!! and even a 6yd chevy big 6cly 10speed dump truck,,hauled a lot of sand for beachs and pit run gravel for driveways. loved hearing this rig run again,keep up the good work! ours had bad center pin and clutchs. dad had the cancer and wanted to run the dragline one last time with me driving the dump truck,,I was 20 then,, loaded me twice and then we had to carry him back to hospital. I'm a operating excavator nowadays but will never forget the work commitment I was taught. i hope you get it to move again! dad would be proud,thanks
Apart from purely being interested there are a lot of us machine heads around the world who have a single project, mine is a 50 year old Massey Ferguson 135, and we learn from people like you. I have worked away from the farm all my adult life and came back after 50 years and now I need this stuff to work out even the most basic stuff. Don't worry about the knockers,they don't have to watch. In addition even my wife watches Mustie, Bundy Bear and you plus scores of others. If you can afford the time and expense and you enjoy it then more of the same, if not then we've enjoyed and learned from everything you've done, just look at the views!!!!! Thanks Lloyd and Donna .. Wales, UK.
You milk as many videos as you like and we will keep on watching. I personally think its great that you not only put the work in but you rescue these magnificent machines rather than just letting them rust into oblivion, i mean who can afford to just dump something like this and walk away. We love it.
Great video, really enjoyed it. You reminded me of myself. I'm a heavy equipment mechanic of 42 years (now retired). 25 years ago, I worked on an Insley that looked like the same model. It was setup as a dragline and had a Kwik-Way Shovel that could be substituted. It has a Chrysler 324 ci L-head straight 8. Strangely, had the same problem as yours, broken valve springs, but on two exhaust valves. However, once I repaired the issue it ran well (hadn't run in at least 25 years prior to this). Keep the old iron running!
I love it so much I watched it twice. Im just fascinated by a person finding a derelict piece of machinery (especially a tracked machine) and taking the time to make a video show how it was brought back to life.
I like the video because its a old scrapper coming back to life after who knows how many years and you take a real interest in it. Its very interesting to see this old piece of equipment run and move again.. Thanks for the updates !
it amazes and boggles my mind that there geniuses wondering around on this earth that can walk up to old rust buckets out into the woods and fire it up after working on it.you know all about everything.what will you do with them after you're finished?wish you could get hold of my old 2006 ford taurus.i don't find any fault with anything you do.you're a very smart man.your curosity keeps you going.
Love it. Well Done Sir. Please dump some 50/50 antifreeze in it before leaving it . Not possible to drain the entire block. Start spraying penetrating oil on all those clutch parts and Brake assy's. I had the biggest smile when things started to rotate and move! Get a garden sprayer and spray all the tracks and sprockets etc., with Diesel. You could make a crude replacement for that missing part. Top of threaded shaft appears to have been hammered.
I enjoy watching anyone make these old heavy equipment projects work again. And I also understand that everybody has their own ideas how that should be accomplished. But this is your project. You get to do whatever you want. We are just watchers and while some don't like how you are doing this come-alive series, it still is your decision. I'll continue watching because I never seen how such things were built or work. So it is a real learning experience for me. Thumbs Up!
DUDE... That thing is awesome. I mean, yeah, it's old and would have limited uses but that thing is still just... awesome old iron. Keep it up we're going to have to nick-name you Lazarus.
if its a k or l model lt was made for the military during WWII to build air strips & the such as tor the center main shaft it has no bearings only Bronze bushings i rebuilt one in the 1980s but you have to build-up the center shaft & TURN IT DOWN with a home-made lathe. jack-up the top using with cribbing & a jack on cribbing under the counterweight crossways with the machine then pull out car body from under the machine do necessary work & welding & machining
then reverse the process to reassemble .you have to remember these were throw-away machines as far as the military was concerned cheaper to use them to create an artificial reef than to load them on a ship & bring them back to the
well...the good thing about me... I wont argue with you...I dont know a thing about restoring an engine and fixing an old carburator... I just enjoy watching those old cranes coming back to life! Keep up the good work!
Thanks for sharing, i really appreciate the opportunity to see the guts of old machines sometimes good ideas are lost through the generations of engineers.
This is my third viewing of this video. I am fascinated by it. There are hundreds of videos on here on fixing and tuning cars and I know cars. But this machine is fascinating and I am sure it has contributed much to the building of good things. Thank you Wes for the work on this marvelous old machine.
Thanks for helping to resurrect this old gal. I appreciate your sensitivity to the mechanical culture that developed it, maintained it, and eventually, abandoned it. Its a treasure, not one that most people would value much, but a treasure of ingenuity, mechanical engineering, and thoughfultness. Thanks for your work.
Restore it to its old glory, Wes. Do it in your own pace & your own way. Make every single part work, and work it will. Clean it all up, mend the bodywork & give 'er a fresh coat. Clear a patch and park her there, spin her monthly and cover up with a large tarp. It's your own property & it's going nowhere. I'm subscribed for just this series & I'm sure I ain't the only one. Great job, keep her alive.
My neighbor and I restored a 1954 Harvester. We had it in the field and people were literally stopping on the road to watch our ol timer go go go...its been a great summer on the farm 🚜 👌
Enjoyed the video of the drag line crane. Your approach to making repairs to make it run made good sense. Keep up the good work. Be looking forward to future videos.
The more negative comments and people you get viewing your channel the better your doing, just jealousy for either what or how you do things or what your working on or how you found it, some great work and a nice piece of history saved and useable, well done.
Im so happy to see someone with the knowledge and the desire to fix these old machines. Every time I drive through the mid-west and see these old backhoe, tractors, cherry pickers, and old tractor trailers (sorry if I mess up terminology); I always wish I could fix them to give them life again. I thought this was uber cool. Thanks for fixing old machines and thank you for sharing.
Thanks again for the shout out. I have that gear driven governor on my Lima with a 525ci buda gas engine. I hear the engine pull down a little when trying to travel but those clutches will need to clean the inside of the drums up. You can try fullers earth, ajax, borax, comet in there with the clutch spinning to shine it up. once the clutch is hot vinegar will also help. I think your drive chains are more stuck on the sprockets than the tracks actually being the issue. That style track is pretty sloppy setup unlike modern tracks that the links will rust tight on. I soaked my track drive chains and beat them with a hammer some and they move pretty well now. Just keep working it back and forth and it will cooperate. I feel like i was watching myself in this video going through everything i did with the Lima. That big forklift would be super handy to have around outside the shop. BTW did you get my last email? Frank
I did. I don't have drop box. Maybe we can figure something else out. I've been soaking the chains in oil, but they are stiff. I tried the old trick of hitting them on the side of the links, but it doesn't help much.
You either love the sound of a purring engine or you don't. If you love it, you will always love it. If you don't, you may grow to like it, but the sound will never be a part of your soul! Great job- LOVE your videos!
Hi Wes....don't worry too much about video presentation.....some of the most instructive/educational videos on here that I return to time and again have been successfully posted by people who have no idea how to edit anything or do proper camera angles and shots but I learn from them all. I'm rooting for you on this old Isley. These things were made by skilled workers a long time before they had computerized lazer cutters and amazing tools to work with. Thank you for what you are doing with these old machines.
Wes, you are obviously so knowledgeable about mechanical devices and electrical components, you should ignore all the complainers and nay sayers. They aren’t worth the time to correct; they lack your knowledge level. I thoroughly enjoy your videos. Please keep all flavors of your videos coming.
My Dad ran these types of machines from the 1950s through the 1970s, it was very hard work. At one time he owned a Bucyrus Erie backhoe that he used around the farm, it was all manual clutch levers and brake pedals, just like the Insley. Eventually he had to have both shoulder rotator cuffs operated to fix the damage from running the clutches, he also had severe hearing loss from running these machines. FYI the BE backhoes used Detroit Diesel two stroke engines, probably pound for pound the loudest reciprocating engines every built.
I’m stoked for the new video! However, making us wait is a bit on the cruel side lol I’m happy to wait though. I’ll be back for the premiere! Thanks Wes!
I watched this when it was first released and loved it then. Came back, don't know why, and it is even better the second time. You can milk all you want and I will watch. You are doing all the work to produced these videos and I for one appreciate the effort. Guess I will watch the forklift series next. That was fun also. Thanks for sharing.
Hey Wes - As a gearhead and lovin' old stuff, these videos are really quite enjoyable. Yes, the goal is just to tinker and get it working. That's all. Please ignore the hormone-boosted folks that were typically born on the wrong side of the bed. Rock on!!
Believe it or not, I put the guards back on before I went wild with the controls, err I should say "guard". I wonder how many guys were killed running one of these...
@@WatchWesWork You don't fall asleep on one of those, free wheel ropes guarantees swift operation, ref no dwell in shifting material. Thanks for replying. Did have a look at how many rings the tree's had?.
We love interesting things so keep vids comeing. Enjoy the lets see if we can get it running cheaply bit. As thats pretty much how I would do it myself
Ironically, first video I've watched on this channel and I certainly don't mind "milking more videos" for something like this. As a mechanic myself, I still find things like this fascinating and sometimes you can't cram a repair/restoration into one video. I've watched vids like this that have absolutely nothing to do with things I work on, but I have found a few times that some minor details pertain to everyday auto repairs. It's all relative in some way.
I have a 12 k too and I just got a 47 bay city shovel operating for a guy, I will make a video of that machine operating, also use link belt ls98 dragline to dig ponds, newest project is a td18 dozer👍🏻 love the videos
I just ran across your vid. I really liked it. Back in the mid 80's , I worked as a mechanic in an old limestone Quarry. There we 3 continental engines there. One was a flathead 6 cylinder much like the one you have. That thing had a lot of power. The other 2 were diesels on a Murphy shovel/ They were beasts! The problem why ppl would just junk those old units were that they wore out and needed overhaul. Was easier to just buy the next model that to overhaul the old unit. The newer ones had extended service lives too so noone wanted them. These old relics are "parked" all over the country.
Start a go fund me page so we can help you pay for fuel to go get the boom. I'm sure I'm not alone at my thoughts. If each of us even pitched in $1 dollar it would buy you all the fuel you need for the year and a pair of boots and maybe even a new Carhadt Hoodie
Excellent video, thanks for publishing these. please just ignore those people who what to see you carry out an unreasonable amount of service work before starting an old engine. to me i see you do due-diligence, i love it. these people seam to forget that a piece of equipment is only new once. it will never be new again. That engine is a the real gem, no one would spend hundreds of dollars on parts and consumables just to find a crapped out engine. I love your channel, keep doing what your doing the way your doing. i like the naturalness to your presentation, not overly polished but still easy to watch.
Class content!! Really enjoying seeing you work on this! Hope you go all the way and get it fully restored! Seen some bits about ppl moaning 🤨 Pffft! Your channel your rules I’m sure there’s a good number of us will still watch. Keep up the good work!!!
Keep working on it and dont give up and scrap the machine. There are not too many out there and are worth repairing into a working unit once again. You came this far and I am looking forward to the next segment.
That is an awesome video mate and highest credit to you for getting that piece of history running again!!! I would have run it with as much of the original gear on it just as you did, the old plugs etc are most likely better quality than the parts available these days haha. Loved the video 👌🦘🇦🇺
Kudos, a GREAT job done getting this running and replacing that valve spring. I never thought you would be able to replace that valve spring without removing the head. Great Video.
Hi Wes ! Great video, please do not be aggravated, with me if I am way too late! But here is two remarks, I very much suggest you drain the block, each night , because I do not know just how cold it gets where you are, but you are risking cracking your block, if you leave the water in it! I am in Quebec Canada where we have Brutal winters, and it would sure crack up here if not drained too!also, here is a trick that works very well! I have two fork lifts, Massey Ferguson model 2500 units with a three cylinder Perkins AD-152 diesels in them. If your diesel tank is above the engine like the masseys, just get a spare or old cap, drill it out, and mount a fitting secured by two nuts through the cap, and screw on a fitting, to a hose, and install an air fitting to your air hose. Use a valve with a lever, or hand wheel, to limit the air pressure. Hook it up to your shop air line, or a tire tank, and just apply about ten lbs of air to the tank! Crack open your bleeder screws , and be delighted to see the diesel fuel, gently flowing out of all your bleeder points, and fuel pump, and injectors, and you can even crank up the system with the engine turning over, and you will see the thing, start right up! Using the traditional method will take you hours, and a lot of fuss! Those older diesels are a dream, compared to the new stuff that needs a technition from NASA! all the best! Great stuff! kennethzakaib607@gmail.com
Wes you have done an absolutely amazing job on getting this old rust bucket working. When you started i was not so optimistic. Keep up the excellent work! You and Andrew Camerata are keeping old things alive.
Awesome! Thanks for the video. There's a critic in every crowd. Ignore them. This is about you doing what you do ... critical advice can be helpful at times but pure criticism should just be ignored.
As a retired aircraft mechanic, I love your "were not trying to finish the Dakar Rally". Fucking perfect my man. Shit, you just want to see if it will run. I applaud that. If it was toast, good luck trying to get your money back for all the parts you mentioned. Keep t up, I never worked on anything this old, but I did enjoy the hell out of watching you "get er done"!!!!!!
@@WatchWesWork it's all subjective I suppose. Nevertheless it's fantastic to see this thing run, draglines were always fascinating to me, and frankly would be useful around the swamphole known as Delaware! Look forward to more!
Great video, nice to see young people willing to get dirty to get something that old to run again. Sixty years ago I rebuilt car engines not only to improve performance but to see what and how they really were made. Hope you get it to move next.
You are wasting your time trying to explain why you didn't pull the engine out and rebuild it. The people who make all those stupid comments have not ever actually done anything like this, they most likely live in a condo and don't even own a lawn mower or know how to change oil in their automobiles. I am sure even if you are able to get the old machine to move the cost to get the machine be able to do any work would be multiples of the amount it would be worth. The old engine never had to make much power, it was never really stressed so it outlived every other part of the machine. It is great to hear it run again but the machine is just a relic, more interesting as an ornament that anything else.
This old machine has earned her rest and then some, I think. It is sad to see a piece of equipment shipped off to make butter knives but you are right about it's value. It is totally obsolete design that has no real place in the modern world.
I personally love these types of videos because it shows just how well built machines(and a lot of other things) were built back in the day. It’s very impressive that something that old and that has sat that long is able to fire up and still run.
Wes, I enjoy watching these videos on finding and starting old machines. I live in Alaska, and there are lots of them in the woods around here in the hills. Some are pretty far gone, but there are some like what you find that I wish someone would try to get running. Keep making these videos and I'll keep watching! Thanks!
Old iron, man. It is kind of sad seeing that stuff cut up for scrap. I will understand if it still ends up there, but that thing helped build America, I get the same thing from going to old steam shows. Not many people around have any idea how things were done before their time. If they can't do it with a smart phone or x box they have no clue. .
Hi Wes, loved this series. One quick point, I know I’m a little late to the party but ignition coils primary is negative ground but the secondary is positive ground. Electrons like to jump from hot things to cold things. The center spark plug electrode is hot and the ground electrode is cold. The concentration of electrons on the center electrode makes it negative and the ground side (cylinder head) makes it positive. I would draw a picture on graph paper, but I don’t know how to post it on the comments. It’s also why center electrode wear every time the spark jumps the electrons try to drag molecules of the electrode with it. Keep up the good work!
They exist to get people excited, and for having a live real time chat while the content is played for the first time. After people still can comment in this section.
Love how you take the time to show how everything works. Not sure how I ended up here, but I've never watched crane videos before this series and I'm hooked! Can't wait to see how the cabling strings up and works.
Those old Continental engines are tough as hell...they'll still run even when they shouldn't. I have and old 1952 Massey Harris Special 44 tractor with an inline 4 Continental that has never had an overhaul with countless hours of use and still fires right up and runs great. Happy to see you get that lovely machine with that old 6 going!
Well i think it’s cool. When i was little my uncle had a pond doug. The an old man and his older dragline arrived and started digging. He would fix things as needed. The track broke a one point and we all pitch in and got it back tougher. The front idealer was spring loaded and flew 25 to 30 feet. Thank for sharing.
the critics come out on every channel i watch. Do this do that they say well it's NOT there pocket book that the money is coming out of. They never seem to understand that this old equipment was parked for a reason. Its old outdated and most of the time you can't get parts. Besides the fact that this old equipment is nothing like the new junk they produce today or since 1980. This old iron was made to last which didn't help the dealerships in selling new equipment. Just disregard all the fools that give you a hard time. Keep up the great work its pretty cool to watch someone else do the stuff i do myself and definitely reassures me that at least im not the only one who runs into problems with old iron. Thanks again Wes
Had an old BE deadline in my National Guard unit some years ago. I spent one whole drill weekend getting it running, and another figuring out all the controls. Used it that summer to dredge a small lake here on post. Unfortunately we had to turn it in the next year. No telling what's happened to it, but it was fun while it lasted.
Really enjoying the content, thought I should say that because I imagine even with the few parts you've bought so far the total spent must be creeping up pretty fast already.. Just so you know it's appreciated :-)
great job wes if you have problems with ice build up on intake change the condensor to a 12 volt it will run much better learned that from my massey harris 33 your great work makes this disabled master mechanic smile again thank you
Lots of people want you to do all manners of stuff but try and get some $$ out of them to help pay for parts. You did a fine job. I'd do the same on a first go-around and after it limbers up a little, think about what might help and what it needs. I ran one like this years ago and the swing/propel deal was goofy with it too. I had to oil it up to get it to change and had the highway blocked. Had a 3-71 in it and a drag bucket. After it got limbered up and the clutches set it'd sling mud like it was supposed to. Good job and Diamond Reo is a fine guy too!
@@WatchWesWork I don't think they realize that it'll be fine for starting it up a few times, not like you're going to be putting it though major work or anything. Also theres so much thermal mass in that giant cast iron engine you could probably run it for quite a while with no coolant and it would be just fine at no load.
Oil is a precious commodity on this planet and it's kind of expensive... If you looked at it and it looks okay for just trying to get an old Beast running, go for it!
@@beckywatt5048 wow! Lmfao, speed water up to 200mtr per second? That accomplishes what? Making oil from water?? And I'm sure the Earth produces enough oil to keep up with our demand. Smh. I do not want whatever you're smoking.
I rightly look forward to your videos as you are right down to business with your narration, and it appears that you are open to doing research on the different machines and vehicles that you work on. As far as educational content you do an excellent job of presenting your material. Granted we have all levels of experience and knowledge in all subjects and there are always comments based on people's mindsets. Your basic approach to finding the root causes and addressing them first rather than just throwing parts at the problem is one that many should follow. Of course with all of these varying suggestions and opinions there are in fact very knowledgeable people out there and that is very helpful.
I'm no gearhead, but watching you, Bus Grease Monkey, Bruce Wilson, & Marty T, really make day! I luv' the resurrecting talents that each of you possess!
Based on the mostly negative feedback for the "premier" feature, I cancelled it and made the video live. I thought it was kind of cool to be able to chat with the viewers, but I probably will not try it again.
Thanks for the great content! You should pin this comment to the top.. (I have no idea how but its possible)
I thought I had.
@@WatchWesWork It is pinned to the top... and it would have been nice to chat with you while you rolled a video out. Doesn't have to be for every video, but every once in a while it is nice to connect with real people.... ahh the internet. The crossroads of ineptitude and impatiences.
Some background, that you may, or may not be aware of, regarding premiere and backlash to the feature.
The premiere feature is part of a few changes the current and unwanted CEO of UA-cam designed in order to transition YT from what it was to a fully paid site (think NetFlix but worse). She's been having a go at it for years now with four failed renditions of the same project, just changed the name each time and threw a fresh coat of paint on top.
Recently however, she and her minions have begun altering the entire platform, one feature at a time, not just content with failing in their side of YT where they threaten certain content creators to post content or go dry out when the "algorithm" has a hiccup on their vids.
And whilst some of the people are aggravated because of the waiting time when the video pops out, most of the hate for that feature stems from there.
Sidenote, i know some are crossed that we'd suggest what UA-cam should do with their own website, but everyone should keep in mind that our situation is akin to what happens with indentured servants (near slavery) in China. Content creators have little to no say in where the website goes, money is made off their backs and a very small fraction of that sum is sent back, now, by machinations of the CEO, even less than it used to be.
I'm of course talking about the engineered adpocalypse, something that started with 3 "journalists" from WSJ (Wall Street Journal), who invented a story at the behest of the CEO, because no sane person would ever put things in perspective (with help from a bit of google-fu and online article from neutral sources) and think otherwise considering not only did they support the cruel remarks of those 3 stooges(when they were fully aware of what was happening), the CEO also met with WSJ to make a cover story for the whole situation "thanking" them for it, something no CEO would ever do. Or normal human being, i doubt someone would meet with their aggressor for a chit chat after the fact. WSJ got their minute of fame, the CEO managed to introduce new rules and regs that not only curtailed the rights of many to post things (historic channels, political debates etc) but also cut a substantial chunk of the ad revenue.
Whilst it might sound as tin-foil talk, trust me this is all based on fact and observation.
Yep I don't like it and worse for you the dislike actually sticks even when the video gets published (changed to like now ) just very annoying that it's on my list+notification and not watchable just a waste of a tap
Thanks from an old mechanic. You keep doing what you're doing. And remember, "Don't let stupid people ruin your day."
Pretty cool to see an old Insley run. I am one of the owners of the parent company that used to own Insley and I personally ran the facility that last made them in Minnesota called Badger equipment. Ironically I noticed you mentioned a Pierce governor, it just happens that our company owned Pierce as well. I am glad to see someone get one of these old girls running again. Looks like fun.
I'm looking for a track drive shaft/sprockets/bearings for a Hein Werner C14, I think it used the Insley crawler. Any chance you know where I can get one?
"I'm willing to milk a couple more videos out of it". I like that,....refreshing honesty. 👍😄
Well it's true!
@@WatchWesWork That's what makes it so refreshing. 😍😁
It is because we love seeing other tortured ....
Its just cool seeing something like this resurrected. Not a mystery. :)
Insley milk
Thank you I absolutely love this project. I had the good fortune at age 17 to operate a very old link belt drag line. It was the same size as much I can now recall. It had been converted to be just a crane. The original engine had been repowered to a 400 cat diesel. Your crane is much newer in design. The link belt I operated had large drum and brake system with esentric yoke the sinched a brake band around the drum. All functions where controlled by three or four levers. There were piped coming straight up out of floor of the cab. Chains with bull rings came up through the center of the pipes. You would pull up on the rings and rotate them 90 degrees and perch them into different cut outs on the interior walls of the tubes to change the functions of the levers. There 2 or 3 petals on the floor also. One I distinctly remember held the lift cable. I and another guy took turns hooking and operating the crane. We were standing under 10000 pound steel boxes of fine ground ceramic brick dust. Ron was a Vietnam Army Corp of Engineers Veteran. We had to trust one another not to lift off of that cable brake pedal while the hooker was removing the door locks at the bottom of the containers. They called them jim boxes cause the material came from a johns and mansfield fire brick plant. We used it as a filler for a product that was applied to the walls of underground coal mines to seal them and also it had something in it that would detect methane gas by turning color. Just like I notice your house movement the levers get pulled and you have to catch them and push or pull them the opposite way. The crane I ran was a different animal everyday because of the temperature and humidity. The bands would grab or slip. You had to use both hands or it could get away from you. I being young and Ron being used to crazy dangerous stuff from the war, we made a good team. Sorry to go so long you brought back some very good memories. Thank you again.
Wes, give those jerks no mind. I have COMPLETELY enjoyed your efforts in all of the 3 vlogs. The reason they balk at your efforts is that they can't open a beer and fart at the same time. There's many more that like the videos than not. KEEP UP THE GOOD WORK!
Yes I like his videos they know nothing about mechanics
I agree 100%. Don't give the negative Nancy's the privilege or honor of one single word from your mind or response. We are all learning here and your taking your valuable time to share with us. I speak for myself and I'm sure many others thank you for your time and efforts. Looking forward to more on this old INSLEY IRON HORSE
@@texasjetman ya me to
@@jacqueschappelle5857 true
When you were struggling with fitting the valve-spring, I was fighting not to reach into the screen to give a hand.
Great job!
LOL, yep, I had the same feeling :o)
I was waiting for the lever bar to slip which is exactly what would happen to me. :)
I remember these old drag lines, 62 years ago i was 13 years old , my dad has a friend named Moon Smith that had a dirt pit. I would sneak over there and watch him dig dirt . One day he ask me to come on up and set in this iron seat and run this thing.. I was so scared that thing rattled and shook when you pulled those levers. Old Moon would just laugh when i made it swing to the right and left and make the boom go up and down . Dragging the bucket in was with dirt was something else you had to do 3 are 4 thing all at the same time ?? I guess that's why we love your old video's , they bring back a lot of old memories .. Thank You so much.. I rang the bell ??
I learned on a 22-B Bucyrus with a clam bucket charging an asphalt in RVN in the Army. I was all OVER the sky the 1st time I tried running it and swinging. Just get in it and have at it. Got better as time went on. Made a good living with a drag bucket after I got out. Nothing like one of the old rigs. And I don't blame Moon. Might as well laugh as to cry!
106,000 views 800 comments in two days should tell you Wes that we like watching your detailed real life make it happen repairs. No matter what you tackle you give it your best and you are not afraid to say "that didn't work". I assure you 99.9% of us viewers will never see or be around n INNSLEY Crane so this is cool old schools technology and we like it.
Post'em and I'll watch'em!! As mentioned, love to see old iron brought back to life. Realize it's not $$$ practical, especially when missing parts either.
my father had one of these old draglines,it only had a 40ft boom and a 3/4yd bucket,but it worked, we had a continental in it from the beginning but i remember dad replacing it with a automotive 6cly ,,and it worked! he taught me how to operate it when i was 16yrs old!!! we were in fremont michigan,,"Fremont Gravel and construction company" got my ass chewed many times for dumping the dirt on top of the cab of the dump truck before I got good enough to load the truck,"got tired of the ass chewings!!! and even a 6yd chevy big 6cly 10speed dump truck,,hauled a lot of sand for beachs and pit run gravel for driveways. loved hearing this rig run again,keep up the good work! ours had bad center pin and clutchs. dad had the cancer and wanted to run the dragline one last time with me driving the dump truck,,I was 20 then,, loaded me twice and then we had to carry him back to hospital. I'm a operating excavator nowadays but will never forget the work commitment I was taught. i hope you get it to move again! dad would be proud,thanks
Loved it when Wes went out to his family property and attempt to start the old abandoned machines.....wish he'd do this again every now and then....
Apart from purely being interested there are a lot of us machine heads around the world who have a single project, mine is a 50 year old Massey Ferguson 135, and we learn from people like you. I have worked away from the farm all my adult life and came back after 50 years and now I need this stuff to work out even the most basic stuff. Don't worry about the knockers,they don't have to watch. In addition even my wife watches Mustie, Bundy Bear and you plus scores of others. If you can afford the time and expense and you enjoy it then more of the same, if not then we've enjoyed and learned from everything you've done, just look at the views!!!!!
Thanks Lloyd and Donna .. Wales, UK.
I really enjoy watching these! Been a mechanic in Alaska since 1992, tons of old iron up here!
You milk as many videos as you like and we will keep on watching. I personally think its great that you not only put the work in but you rescue these magnificent machines rather than just letting them rust into oblivion, i mean who can afford to just dump something like this and walk away. We love it.
Never thought I would see anything move on her. Fascinating. Will be here every time you post.
Great video, really enjoyed it. You reminded me of myself. I'm a heavy equipment mechanic of 42 years (now retired). 25 years ago, I worked on an Insley that looked like the same model. It was setup as a dragline and had a Kwik-Way Shovel that could be substituted. It has a Chrysler 324 ci L-head straight 8. Strangely, had the same problem as yours, broken valve springs, but on two exhaust valves. However, once I repaired the issue it ran well (hadn't run in at least 25 years prior to this). Keep the old iron running!
Wes, milk away and resurrect that behemeth. I would love to see it move again and love seeing your videos. Good Luck and keep them coming.
manusamoaus
Resurrection, people love it even if they don’t know why. The more challenging the better.
I whole completely agree!!!!
Well this one is a challenge!
It's fascinating to see you resurrect this beast!
I love it so much I watched it twice. Im just fascinated by a person finding a derelict piece of machinery (especially a tracked machine) and taking the time to make a video show how it was brought back to life.
I like the video because its a old scrapper coming back to life after who knows how many years and you take a real interest in it. Its very interesting to see this old piece of equipment run and move again.. Thanks for the updates !
it amazes and boggles my mind that there geniuses wondering around on this earth that can walk up to old rust buckets out into the woods and fire it up after working on it.you know all about everything.what will you do with them after you're finished?wish you could get hold of my old 2006 ford taurus.i don't find any fault with anything you do.you're a very smart man.your curosity keeps you going.
Love it. Well Done Sir. Please dump some 50/50 antifreeze in it before leaving it . Not possible to drain the entire block. Start spraying penetrating oil on all those clutch parts and Brake assy's. I had the biggest smile when things started to rotate and move! Get a garden sprayer and spray all the tracks and sprockets etc., with Diesel. You could make a crude replacement for that missing part.
Top of threaded shaft appears to have been hammered.
My thoughts too Gord Baker!
I enjoy watching anyone make these old heavy equipment projects work again. And I also understand that everybody has their own ideas how that should be accomplished. But this is your project. You get to do whatever you want. We are just watchers and while some don't like how you are doing this come-alive series, it still is your decision. I'll continue watching because I never seen how such things were built or work. So it is a real learning experience for me. Thumbs Up!
DUDE...
That thing is awesome. I mean, yeah, it's old and would have limited uses but that thing is still just... awesome old iron. Keep it up we're going to have to nick-name you Lazarus.
if its a k or l model lt was made for the military during WWII to build air strips & the such as tor the center main shaft it has no bearings only Bronze bushings i rebuilt one in the 1980s but you have to build-up the center shaft & TURN IT DOWN with a home-made lathe. jack-up the top using with cribbing & a jack on cribbing under the counterweight crossways with the machine then pull out car body from under the machine do necessary work & welding & machining
then reverse the process to reassemble .you have to remember these were throw-away machines as far as the military was concerned cheaper to use them to create an artificial reef than to load them on a ship & bring them back to the
well...the good thing about me... I wont argue with you...I dont know a thing about restoring an engine and fixing an old carburator... I just enjoy watching those old cranes coming back to life! Keep up the good work!
Thanks for sharing, i really appreciate the opportunity to see the guts of old machines sometimes good ideas are lost through the generations of engineers.
This is my third viewing of this video. I am fascinated by it. There are hundreds of videos on here on fixing and tuning cars and I know cars. But this machine is fascinating and I am sure it has contributed much to the building of good things. Thank you Wes for the work on this marvelous old machine.
Thanks for helping to resurrect this old gal. I appreciate your sensitivity to the mechanical culture that developed it, maintained it, and eventually, abandoned it. Its a treasure, not one that most people would value much, but a treasure of ingenuity, mechanical engineering, and thoughfultness. Thanks for your work.
Pretty amazing for an engine that could have voted for Herbert Hoover.
Ha
Lol classic
Restore it to its old glory, Wes. Do it in your own pace & your own way. Make every single part work, and work it will. Clean it all up, mend the bodywork & give 'er a fresh coat. Clear a patch and park her there, spin her monthly and cover up with a large tarp. It's your own property & it's going nowhere. I'm subscribed for just this series & I'm sure I ain't the only one. Great job, keep her alive.
Wes, I'm looking forward to watching you fix the forklift, to move the junk pile, to move the Dragline. Keep going.
Me too. I learn a lot about diesels when he talks. I listen.
My neighbor and I restored a 1954 Harvester. We had it in the field and people were literally stopping on the road to watch our ol timer go go go...its been a great summer on the farm 🚜 👌
Enjoyed the video of the drag line crane. Your approach to making repairs to make it run made good sense. Keep up the good work. Be looking forward to future videos.
The more negative comments and people you get viewing your channel the better your doing, just jealousy for either what or how you do things or what your working on or how you found it, some great work and a nice piece of history saved and useable, well done.
Love the vids getting it started with what it's got no new parts or minimal new parts that's the best way to have it
Im so happy to see someone with the knowledge and the desire to fix these old machines. Every time I drive through the mid-west and see these old backhoe, tractors, cherry pickers, and old tractor trailers (sorry if I mess up terminology); I always wish I could fix them to give them life again. I thought this was uber cool. Thanks for fixing old machines and thank you for sharing.
Thanks again for the shout out. I have that gear driven governor on my Lima with a 525ci buda gas engine. I hear the engine pull down a little when trying to travel but those clutches will need to clean the inside of the drums up. You can try fullers earth, ajax, borax, comet in there with the clutch spinning to shine it up. once the clutch is hot vinegar will also help. I think your drive chains are more stuck on the sprockets than the tracks actually being the issue. That style track is pretty sloppy setup unlike modern tracks that the links will rust tight on. I soaked my track drive chains and beat them with a hammer some and they move pretty well now. Just keep working it back and forth and it will cooperate. I feel like i was watching myself in this video going through everything i did with the Lima.
That big forklift would be super handy to have around outside the shop. BTW did you get my last email?
Frank
I did. I don't have drop box. Maybe we can figure something else out. I've been soaking the chains in oil, but they are stiff. I tried the old trick of hitting them on the side of the links, but it doesn't help much.
A small jack hammer/ large air hammer would do it , a buddy of mine got a couple in a Jeager air compressor I fixed for him a few yrs ago.
73DiamondReo and the
You either love the sound of a purring engine or you don't. If you love it, you will always love it. If you don't, you may grow to like it, but the sound will never be a part of your soul! Great job- LOVE your videos!
Good job dude I’m really enjoying watching these videos on this old dragline.
Hi Wes....don't worry too much about video presentation.....some of the most instructive/educational videos on here that I return to time and again have been successfully posted by people who have no idea how to edit anything or do proper camera angles and shots but I learn from them all. I'm rooting for you on this old Isley. These things were made by skilled workers a long time before they had computerized lazer cutters and amazing tools to work with. Thank you for what you are doing with these old machines.
Love watching this and admire your patience and knowledge.
Wes, you are obviously so knowledgeable about mechanical devices and electrical components, you should ignore all the complainers and nay sayers. They aren’t worth the time to correct; they lack your knowledge level. I thoroughly enjoy your videos. Please keep all flavors of your videos coming.
Wes we like you, because you work with what you got, like Mustie1!! GREAT VID
My Dad ran these types of machines from the 1950s through the 1970s, it was very hard work. At one time he owned a Bucyrus Erie backhoe that he used around the farm, it was all manual clutch levers and brake pedals, just like the Insley. Eventually he had to have both shoulder rotator cuffs operated to fix the damage from running the clutches, he also had severe hearing loss from running these machines. FYI the BE backhoes used Detroit Diesel two stroke engines, probably pound for pound the loudest reciprocating engines every built.
I’m stoked for the new video! However, making us wait is a bit on the cruel side lol I’m happy to wait though. I’ll be back for the premiere! Thanks Wes!
I will wait as long as it takes
I watched this when it was first released and loved it then.
Came back, don't know why, and it is even better the second time.
You can milk all you want and I will watch.
You are doing all the work to produced these videos and I for one appreciate the effort.
Guess I will watch the forklift series next. That was fun also.
Thanks for sharing.
Great Video's Wes, keep making them, enjoying the troubleshooting and repair of the various equipment that you work on.
Hey Wes - As a gearhead and lovin' old stuff, these videos are really quite enjoyable. Yes, the goal is just to tinker and get it working. That's all. Please ignore the hormone-boosted folks that were typically born on the wrong side of the bed. Rock on!!
There's mechanical life in the woods, first this century.
Scary controls.
Thanks for sharing.
Believe it or not, I put the guards back on before I went wild with the controls, err I should say "guard". I wonder how many guys were killed running one of these...
@@WatchWesWork You don't fall asleep on one of those, free wheel ropes guarantees swift operation, ref no dwell in shifting material. Thanks for replying. Did have a look at how many rings the tree's had?.
@@bostedtap8399 Hmm. I didn't think about counting rings. I'll try that!
@@WatchWesWork It will confirm or not, approximate time of the machine encampment. Have a great week.
I am really awestruck by the engineering that went into building this machine. I couldn't imagine creating something so complex.
We love interesting things so keep vids comeing. Enjoy the lets see if we can get it running cheaply bit. As thats pretty much how I would do it myself
Ironically, first video I've watched on this channel and I certainly don't mind "milking more videos" for something like this. As a mechanic myself, I still find things like this fascinating and sometimes you can't cram a repair/restoration into one video. I've watched vids like this that have absolutely nothing to do with things I work on, but I have found a few times that some minor details pertain to everyday auto repairs. It's all relative in some way.
I have a 12 k too and I just got a 47 bay city shovel operating for a guy, I will make a video of that machine operating, also use link belt ls98 dragline to dig ponds, newest project is a td18 dozer👍🏻 love the videos
I just ran across your vid. I really liked it. Back in the mid 80's , I worked as a mechanic in an old limestone Quarry. There we 3 continental engines there. One was a flathead 6 cylinder much like the one you have. That thing had a lot of power.
The other 2 were diesels on a Murphy shovel/ They were beasts! The problem why ppl would just junk those old units were that they wore out and needed overhaul. Was easier to just buy the next model that to overhaul the old unit. The newer ones had extended service lives too so noone wanted them. These old relics are "parked" all over the country.
Personally, I want to see more vids of this thing. I'd even like to see if you can rescue the rest of the boom and make it all work again!
Start a go fund me page so we can help you pay for fuel to go get the boom. I'm sure I'm not alone at my thoughts. If each of us even pitched in $1 dollar it would buy you all the fuel you need for the year and a pair of boots and maybe even a new Carhadt Hoodie
Excellent video, thanks for publishing these. please just ignore those people who what to see you carry out an unreasonable amount of service work before starting an old engine. to me i see you do due-diligence, i love it. these people seam to forget that a piece of equipment is only new once. it will never be new again.
That engine is a the real gem, no one would spend hundreds of dollars on parts and consumables just to find a crapped out engine.
I love your channel, keep doing what your doing the way your doing. i like the naturalness to your presentation, not overly polished but still easy to watch.
Class content!! Really enjoying seeing you work on this! Hope you go all the way and get it fully restored! Seen some bits about ppl moaning 🤨 Pffft! Your channel your rules I’m sure there’s a good number of us will still watch. Keep up the good work!!!
Keep working on it and dont give up and scrap the machine. There are not too many out there and are worth repairing into a working unit once again. You came this far and I am looking forward to the next segment.
That is an awesome video mate and highest credit to you for getting that piece of history running again!!!
I would have run it with as much of the original gear on it just as you did, the old plugs etc are most likely better quality than the parts available these days haha.
Loved the video 👌🦘🇦🇺
Kudos, a GREAT job done getting this running and replacing that valve spring. I never thought you would be able to replace that valve spring without removing the head. Great Video.
Ignore all of the nay sayers, you did fine. I wouldn't have changed the oil either until it had a chance to pump around and pick up more sludge.
Hi Wes ! Great video, please do not be aggravated, with me if I am way too late! But here is two remarks, I very much suggest you drain the block, each night , because I do not know just how cold it gets where you are, but you are risking cracking your block,
if you leave the water in it! I am in Quebec Canada where we have Brutal winters, and it would sure crack up here if not drained too!also, here is a trick that works very well! I have two fork lifts, Massey Ferguson model 2500 units with a three cylinder Perkins
AD-152 diesels in them. If your diesel tank is above the engine like the masseys, just get a spare or old cap, drill it out, and mount
a fitting secured by two nuts through the cap, and screw on a fitting, to a hose, and install an air fitting to your air hose. Use a valve
with a lever, or hand wheel, to limit the air pressure. Hook it up to your shop air line, or a tire tank, and just apply about ten lbs of air to the tank! Crack open your bleeder screws , and be delighted to see the diesel fuel, gently flowing out of all your bleeder points,
and fuel pump, and injectors, and you can even crank up the system with the engine turning over, and you will see the thing, start right up! Using the traditional method will take you hours, and a lot of fuss! Those older diesels are a dream, compared to the new stuff that needs a technition from NASA! all the best! Great stuff! kennethzakaib607@gmail.com
Yes I’m one of those who love watching you breathe new life into this old machine. Great video enjoy the process, any plans for it?
Wes you have done an absolutely amazing job on getting this old rust bucket working. When you started i was not so optimistic. Keep up the excellent work! You and Andrew Camerata are keeping old things alive.
Awesome! Thanks for the video. There's a critic in every crowd. Ignore them. This is about you doing what you do ... critical advice can be helpful at times but pure criticism should just be ignored.
As a retired aircraft mechanic, I love your "were not trying to finish the Dakar Rally". Fucking perfect my man. Shit, you just want to see if it will run. I applaud that. If it was toast, good luck trying to get your money back for all the parts you mentioned. Keep t up, I never worked on anything this old, but I did enjoy the hell out of watching you "get er done"!!!!!!
You need to get the boom back in this thing and dig some holes!
yeah!
I'll see what I can do!
I thought draglines were more of a dredging tool, or like a strip mining op thing, not meant for digging holes
@@General_Eisenhower1945 I guess it depends on how you define "hole".
@@WatchWesWork it's all subjective I suppose. Nevertheless it's fantastic to see this thing run, draglines were always fascinating to me, and frankly would be useful around the swamphole known as Delaware!
Look forward to more!
Great video, nice to see young people willing to get dirty to get something that old to run again. Sixty years ago I rebuilt car engines not only to improve performance but to see what and how they really were made. Hope you get it to move next.
You are wasting your time trying to explain why you didn't pull the engine out and rebuild it. The people who make all those stupid comments have not ever actually done anything like this, they most likely live in a condo and don't even own a lawn mower or know how to change oil in their automobiles. I am sure even if you are able to get the old machine to move the cost to get the machine be able to do any work would be multiples of the amount it would be worth. The old engine never had to make much power, it was never really stressed so it outlived every other part of the machine. It is great to hear it run again but the machine is just a relic, more interesting as an ornament that anything else.
Because it has zero value. You can't even give them away. His only goal was to try and get it running, nothing more.
This old machine has earned her rest and then some, I think. It is sad to see a piece of equipment shipped off to make butter knives but you are right about it's value. It is totally obsolete design that has no real place in the modern world.
Uhm not real u hater i got my 30 year old snowmobile going for 10$
And my car that is older for free
And my dads volvo he had when he was young is worth more now then he sold and probely boght ot
I personally love these types of videos because it shows just how well built machines(and a lot of other things) were built back in the day. It’s very impressive that something that old and that has sat that long is able to fire up and still run.
This is what reanimating a corpse must feel like to a necromancer. Looking forward to the next installment!
Wes, I enjoy watching these videos on finding and starting old machines. I live in Alaska, and there are lots of them in the woods around here in the hills. Some are pretty far gone, but there are some like what you find that I wish someone would try to get running. Keep making these videos and I'll keep watching! Thanks!
Old iron, man. It is kind of sad seeing that stuff cut up for scrap. I will understand if it still ends up there, but that thing helped build America, I get the same thing from going to old steam shows. Not many people around have any idea how things were done before their time. If they can't do it with a smart phone or x box they have no clue. .
Pretty sure Xbox’s can’t be used for much other than games.
boomer comment
you do know that crawler cranes like these are still in use right?
Hi Wes, loved this series. One quick point, I know I’m a little late to the party but ignition coils primary is negative ground but the secondary is positive ground. Electrons like to jump from hot things to cold things. The center spark plug electrode is hot and the ground electrode is cold. The concentration of electrons on the center electrode makes it negative and the ground side (cylinder head) makes it positive. I would draw a picture on graph paper, but I don’t know how to post it on the comments. It’s also why center electrode wear every time the spark jumps the electrons try to drag molecules of the electrode with it. Keep up the good work!
Pretty cool stuff. I'd love to see videos on that Clark forklift
Very impressive. Amazed how you managed to fit the new valve spring and keepers in such difficult conditions. Well done. 🇬🇧 🏴
Looks like you just need to have one of the firefighting planes fly over and dump a planeload of PB Blaster on the craine.
Binge watching your videos to get up to the present...your video editing skills have come a LONG way from the start! Awesome!
Ignore the haters Wes keep doing what you do you cant make everyone happy
Right!
Wes!!! You rock for helping Morgan out with her Bronco breaks. I love people like you. Your channel is great!
What's the point of 'Premier' notifications? They are a frigging annoyance.
They exist to get people excited, and for having a live real time chat while the content is played for the first time. After people still can comment in this section.
@@queenofspadz Right. But folks don't seem to like it so I'll try to avoid it in a future.
@@WatchWesWork I don't care for all the ads youtube shows but I know content creators can't control that. Thanks for the educational and fun videos.
Love how you take the time to show how everything works. Not sure how I ended up here, but I've never watched crane videos before this series and I'm hooked! Can't wait to see how the cabling strings up and works.
Next time you might try compressing the spring and tie it off with a zip tie and cut them off after
That's a pretty good idea!
@@WatchWesWork mind you I've never tried it myself
Better be a big zip tie or it may hurt.
Damn good idea
@@jerimiaus69 I was due
It’s just plain fun to get old machines running again! I did that in college, we restored antique farm machinery, some over 100 years old.
good to see it doing movements
Those old Continental engines are tough as hell...they'll still run even when they shouldn't. I have and old 1952 Massey Harris Special 44 tractor with an inline 4 Continental that has never had an overhaul with countless hours of use and still fires right up and runs great. Happy to see you get that lovely machine with that old 6 going!
Awesome, can't wait for the next one!
Well i think it’s cool. When i was little my uncle had a pond doug. The an old man and his older dragline arrived and started digging. He would fix things as needed. The track broke a one point and we all pitch in and got it back tougher. The front idealer was spring loaded and flew 25 to 30 feet. Thank for sharing.
I must be getting old. I find this video really interesting. Lol
the critics come out on every channel i watch. Do this do that they say well it's NOT there pocket book that the money is coming out of. They never seem to understand that this old equipment was parked for a reason. Its old outdated and most of the time you can't get parts. Besides the fact that this old equipment is nothing like the new junk they produce today or since 1980. This old iron was made to last which didn't help the dealerships in selling new equipment. Just disregard all the fools that give you a hard time. Keep up the great work its pretty cool to watch someone else do the stuff i do myself and definitely reassures me that at least im not the only one who runs into problems with old iron. Thanks again Wes
I like this.
[Retired Marine] Ships diesel engineer.
Great job
Had an old BE deadline in my National Guard unit some years ago. I spent one whole drill weekend getting it running, and another figuring out all the controls. Used it that summer to dredge a small lake here on post. Unfortunately we had to turn it in the next year. No telling what's happened to it, but it was fun while it lasted.
Really enjoying the content, thought I should say that because I imagine even with the few parts you've bought so far the total spent must be creeping up pretty fast already.. Just so you know it's appreciated :-)
great job wes if you have problems with ice build up on intake change the condensor to a 12 volt it will run much better learned that from my massey harris 33 your great work makes this disabled master mechanic smile again thank you
I'm starting to like the flat head design.
Reliable engines but poor airflow in the head makes them inefficient
Lots of people want you to do all manners of stuff but try and get some $$ out of them to help pay for parts. You did a fine job. I'd do the same on a first go-around and after it limbers up a little, think about what might help and what it needs. I ran one like this years ago and the swing/propel deal was goofy with it too. I had to oil it up to get it to change and had the highway blocked. Had a 3-71 in it and a drag bucket. After it got limbered up and the clutches set it'd sling mud like it was supposed to. Good job and Diamond Reo is a fine guy too!
Got to love 'Comment Warriors'! always making the same old comments about changing oil etc.
It just really breaks their hearts to see me use that old "bad" oil.
@@WatchWesWork I don't think they realize that it'll be fine for starting it up a few times, not like you're going to be putting it though major work or anything. Also theres so much thermal mass in that giant cast iron engine you could probably run it for quite a while with no coolant and it would be just fine at no load.
Oil is a precious commodity on this planet and it's kind of expensive... If you looked at it and it looks okay for just trying to get an old Beast running, go for it!
jp400motox Oil is abiotic , the earth makes it every day, speed water up to 200mtr per second , a little research please.
@@beckywatt5048 wow! Lmfao, speed water up to 200mtr per second? That accomplishes what? Making oil from water?? And I'm sure the Earth produces enough oil to keep up with our demand. Smh. I do not want whatever you're smoking.
I rightly look forward to your videos as you are right down to business with your narration, and it appears that you are open to doing research on the different machines and vehicles that you work on. As far as educational content you do an excellent job of presenting your material. Granted we have all levels of experience and knowledge in all subjects and there are always comments based on people's mindsets. Your basic approach to finding the root causes and addressing them first rather than just throwing parts at the problem is one that many should follow. Of course with all of these varying suggestions and opinions there are in fact very knowledgeable people out there and that is very helpful.
LOL we can have a drag race between the deboss garage LOL that would be so cool 😎 and funny
I'm no gearhead, but watching you, Bus Grease Monkey, Bruce Wilson, & Marty T, really make day! I luv' the resurrecting talents that each of you possess!